Effects of rare earth on microstructure and mechanical properties of AZ31B wrought magnesium alloy |
ZHENG Wei-chao,LI Shuang-shou,TANG Bin,ZENG Da-ben |
197 |
Microstructures and room temperature mechanical properties of Mg-5Zn-3Al-0.2Mn casting alloy |
YANG Guang-yu, JIE Wan-qi, HAO Qi-tang |
205 |
Synthesis of TiNi-TiN gradient coating by hybrid method of laser cladding and laser nitriding |
YANG Yong-qiang, ZHANG Cui-hong |
213 |
Microstructures and mechanical properties of Mg-Gd-Y-(Mn, Zr) magnesium alloys |
ZHANG Xin-ming, CHEN Jian-mei, DENG Yun-lai,XIAO Yang, JIANG Hao, DENG Zhen-zhen |
219 |
Effect of heat treatment on strength and ductility of SiCp/Al composites |
FAN Jian-zhong, XIAO Bo-lü, ZUO Tao, SANG Ji-mei,ZHANG Wei-yu, XU Jun, SHI Li-kai |
228 |
Synthesis of Y2O3 nanopowders and transparent Y2O3 ceramics by carbonate-precipitation process |
WEN Lei, QI Lu, SUN Xu-dong, XU Guo-xiang |
235 |
Influence of load, time, speed on sliding tribology behavior of C/C composites |
GE Yi-cheng, YI Mao-zhong |
241 |
Superplasticforming process design of titanium alloy bellows based on robust design method |
WANG Gang, WANG Jin, CHEN Jun, RUAN Xue-yu |
247 |
Analysis of energy release rate for interfacial debonding in fiber pull-out by using stress functions |
LIU Peng-fei, TAO Wei-ming, GUO Yi-mu |
253 |
Low-cycle fatigue behavior and plastic strain energy of A356 alloys |
LIU Zhong-xia, SONG Mou-sheng, LI Ji-wen, WENG Yong-gang,WANG Ming-xing, SONG Tian-fu |
260 |
Dissolution mechanism of solid nickel in liquid zinc |
KONG Gang, LU Jin-tang, XU Qiao-yu |
268 |
Effect of pre-treatment procedures on structure and performance of thermal battery anode LiB alloy |
DUAN Wei, ZHANG Si-qi, LIU Zhi-jian |
273 |
Microstructure and properties of (Ti, Al)N coating |
CHEN Li, WU En-xi, YIN Fei, WANG She-quan,WANG Xiu-quan |
279 |
Optical absorption properties of Au-Ag composite nanoparticles |
YAN Shi-nong, WANG Yong-chang, ZHU Jian, WEN Ting-dun |
284 |
PSolidification of R-Fe alloy in magnetic field |
DENG Pei-ran, LI Jian-guo |
289 |
Influence of aluminum additive onmicrostructure and electrochemical properties of Co free AB5-type hydrogen storage alloys |
LUO Yong-chun, YAN Ru-xu, ZHANG Fa-liang,WANG Da-hui, KANG Long, CHEN Jian-hong |
296 |
Fabrication and physical properties of Cu-ZnO(10) composite material |
CHEN Cheng-yi, RUAN Jian-ming, XIE Jian-quan,ZOU Jian-peng, WAN Qian |
304 |
In situ Al/Al2O3 composites prepared by adding NH4Al(SO4)2 into pure Al melt |
WANG Hong, FU Gao-feng, JIANG Lan,SHI Yu-juan, LIU Chang-sheng |
310 |
Fillet-lifting mechanism for Sn-Bi-Ag-Cu solder joint in lead-free wave soldering |
HE Peng, ZHAO Zhi-li, QIAN Yi-yu, LI Zhong-suo |
315 |
Splitting rolling simulation by reproducing kernel particle method |
CUI Qing-ling, LI Chang-sheng, LIU Xiang-hua, WANG Guo-dong |
322 |
Effects of Tweens and sodium dodecyl sulfate as modifiers on hydrothermal synthesis of nanocrystals copper |
ZHANG Xi-feng, YIN Heng-bo, CHENG Xiao-nong,CHEN Kang-min, HU Hui-feng, YU Qi, WANG Ai-li |
327 |
Recrystallization texture in cool rolled sheet of Al alloy 6111 after solution treatment |
CHEN Yang, ZHAO Gang, LIU Chun-ming, ZUO Liang |
333 |
Phase formation regularities of Ni-Al alloy nano powders prepared by vapor deposition |
GAO Wei-li, YAN Hong-ge, SHENG Shao-ding, CHEN Zhen-hua |
339 |
Simulation of particle separation process based on MATLAB/Simulink |
YANG Ying-jie, DENG Hui-yong, LI Xia |
346 |
Optimization designs of NiFe2O4 cermet inert anodes based on GA-BP hybrid neural net work |
LI Jie, LIU Dai-fei, QIN Qing-wei |
351 |
Leaching kinetics of non-constant temperature process of calcium aluminate slag under microwave radiation |
TONG Zhi-fang, BI Shi-wen, YU Hai-yan, WU Yu-sheng |
357 |
Recovery of precious metals from spent auto-catalysts by method of pressure alkaline treatment-cyanide leaching |
HUANG Kun,CHEN Jing,CHEN Yiran,ZHAO Jia-chun,LI Qi-wei, YANG Qiu-xue |
363 |
Design on functional chaos optimizer about consumption of liquefied petroleum gas in copper refining process |
E Jia-qiang, WANG Yao-nan, MEI Chi, GONG Jin-ke |
370 |
Non-isothermal crystallization kinetics of poly(ethylene oxide) and its composite with lithium perchlorate |
LIU Qing-quan, PAN Chun-yue, SHEN Shao-hua |
377 |