| Effects of temperature and holding time on elevated-temperature mechanical properties of aluminum alloy 2519A |
ZHANG Xin-ming, LIU Bo, LIU Ying, LI Hui-zhong, LI Hui-jie |
1561 |
| Numerical simulation on dendrite growth process of Mg alloy using cellular automaton method based on probability capturing model |
FU Zhen-nan, XU Qing-yan, XIONG Shou-mei |
1567 |
| Effects of electric parameters on anodic coating thickness of micro arc oxidation on magnesium alloys |
ZHANG Rong-fa,, SHAN Da-yong, CHEN Rong-shi, HAN En-hou |
1574 |
| Modification of copper plating at low current density on anodic film of LC4 aluminum alloy |
MENG Lin, HE Ye-dong, ZHANG Wei, YAO Hong-yu, XIE Ming-li |
1580 |
| Deformation and mechanical properties of Cu-based bulk metallic glasses during crystallization |
LI Chun-yan,, KOU Sheng-zhong,, HU Yong,,DING Yu-tian,, XU Guang-ji |
1586 |
| Effect of pre-annealing on microstructures and soft magnetic properties of nanocrystalline Fe86Zr7B6Cu1 alloy |
TANG Jian-cheng,WU Ai-hua,ZHANG Meng,LIU Wen-sheng |
1592 |
| Non-isothermal oxidation behavior of C/SiC composites rapidly prepared by molten silicon infiltration technique |
YAN Zhi-qiao, XIONG Xiang, XIAO Peng, JIANG Si-zhou, HUANG Bai-yun |
1597 |
| Aging treatment and kinetical analysis of Sm2Co17 based permanent rare-earth magnets |
LI Li-ya, YI Jian-hong, HUANG Bai-yun, PENG Yuan-dong |
1604 |
| Analyses on thermal barrier effects of zirconia based thermal barrier coatings |
ZHOU Hong, LI Fei, HE Bo, LU Yan-ling, WANG Jun, SUN Bao-de |
1609 |
| Aluminizing microstructure and its formation mechanism on electro-deposited nickel layer on copper matrix |
WANG Hong-xing, SHENG Xiao-bo, CHU Cheng-lin,LIN Ping-hua,, DONG Yin-sheng |
1616 |
| Numerical simulation for electron beam welding of 12 mm-thickness titanium alloy plate |
HU Mei-juan, LIU Jin-he |
1622 |
| Effect of particle size on properties of injection-molded bonded NdFeB magnet |
DUAN Bo-hua, QU Xuan-hui, ZHANG Lin, QIN Meng-li,ZHANG Shen-gen, LI Ping |
1627 |
| AlFe3C0.5 phase in diffusion layers of hot dip aluminized steel |
ZHANG Wei, WEN Jiu-ba, WANG Xiao-feng, XIONG Fei, CUI Xin-an |
1632 |
| Influence of surface metallization of graphite on tribological properties of Cu-matrix/graphite composite materials |
JIAO Ming-hua, YIN Yan-guo, YU Jian-wei, XIE Ting, DU Chun-kuan,LIU Kun, WU Yu-cheng |
1637 |
| Microstructure and mechanical properties ofAlN/cordierite-based glass-ceramic composites |
CHEN Guo-hua |
1644 |
| Erosion wear behavior of Cu-Cr-Zr alloy in liquid-solid two-phase flow |
LIU Yong, LONG Yong-qiang,, LIU Ping, TIAN Bao-hong |
1650 |
| Microstructure and tribological properties of surface plasma chromising layer of Ti2AlNb-based alloy |
WU Hong-yan, ZHANG Ping-ze, LI Jian-liang, MA Shi-jian, XU Zhong |
1656 |
| Component design theory for new type of FeMB nanocrystalline soft magnetic materials |
SHEN Kun, WANG Ming-pu, CAO Ling-fei, GUO Ming-xing,LI Shu-mei, DONG Qi-yi |
1661 |
| Flow stress behavior of 5083 aluminium alloy under hot compression deformation |
WU Wen-xiang, SUN De-qing, CAO Chun-yan,WANG Zhan-feng, ZHANG Hui |
1667 |
| Compression capability and energy absorption of foam aluminum cylinder sandwich with silicone rubber |
LIN Sen, FENG Yi, ZHA Hai-bo, LI Shu, WANG Juan, ZHU Qi-qi |
1672 |
| Hot compression deformation behaviors of AZ80 magnesium alloy at elevated temperature |
LUAN Na, LI Luo-xing, LI Guang-yao, ZHONG Zhi-hua |
1678 |
| Influence of rare earths on microstructure and damping capacity of ZA alloy foam |
WANG Hai-bin, LING Shu-hua, XIAO Peng, FAN Zhi-kang |
1685 |
| Effect of hydrofluoric acid on morphology and wettability of micro-nano ZnO powders |
LIU Chang-song, WANG Ling, LI Zhi-wen, XU Zhen, HUANG Ji-hua |
1690 |
| Preparation and photocatalytic activity for O2 evolution of low content Pr3+ doped WO3 |
DU Jun-ping, LI Jie, CHEN Qi-yuan |
1695 |
| Preparation of Ni nanocrystals with different morphologies by liquor-phase reduction |
ZHANG Xi-feng, CHENG Xiao-nong, YIN Heng-bo, WU Yin-yin |
1700 |
| Preparation of nickel-manganese composite oxide by room temperature solid state reaction-calcining decomposition |
YANG Bo, WANG Zhi-xing, GUO Hua-jun, LI Xin-hai, ZHOU You-yuan |
1705 |
| Effect of calcined temperature on photoelectrochemical and photocatalytic properties of K2Ti6O13 thin films |
HU Yu-yan, QIAN Qing-hua, LIU Chang, ZHOU Xue-feng,FENG Xin, LU Xiao-hua |
1711 |
| Dephosphorization technology of iron ores by Acidthiobacillus ferrooxidans |
JIANG Tao, JIN Yong-shi, LI Qian, YANG Yong-bin,LI Guang-hui, QIU Guan-zhou |
1718 |
| Photocatalytic degradation of 4-chloropheno by Fe(Ⅲ) modified bentonite |
TANG Jian-jun, YUAN Hui-zhou, DENG Ai-hua, LI Rong-xian |
1723 |
