| Structural Materials |
| Microstructural characteristics of Al-20Si-2Cu-0.4Mg-1Ni alloy formed by rheo-squeeze casting after ultrasonic vibration treatment |
WU Shu-sen, ZHONG Gu, AN Ping, WAN Li, H. NAKAE |
2863 |
| Microstructure evolution and solidification behaviors of A2017 alloy during cooling/stirring and rolling process |
GUAN Ren-guo, ZHAO Zhan-yong, CHAO Run-ze, FENG Zhen-xian, LIU Chun-ming |
2871 |
| Morphology and crystallography of β precipitate phase in Mg-Gd-Y-Nd-Zr alloy |
LI Ting, DU Zhi-wei, ZHANG Kui, LI Xing-gang, YUAN Jia-wei, LI Yong-jun, MA Ming-long, SHI Guo-liang |
2877 |
| Low temperature mechanical properties of as-extruded Mg-10Gd-3Y-0.5Zr magnesium alloy |
ZHANG Xue-feng, WU Guo-hua, LIU Wen-cai, DING Wen-jiang |
2883 |
| Liquation cracking in laser beam welded joint of ZK60 magnesium alloy |
YU Zhao-hui, YAN Hong-ge, YIN Xu-yu, LI Ying, YAN Guo-hua |
2891 |
| Oxidation behaviour of molten ZK60 and ME20 magnesium alloys with magnesium in 1,1,1,2-tetrafluoroethane/air atmospheres |
CHEN Hu-kui, GONG Zan-fang |
2898 |
| Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state |
XU Hong-yu, JI Ze-sheng, HU Mao-liang, WANG Zhen-yu |
2906 |
| Experimental study and numerical analysis on dry friction and wear performance of co-continuous SiC/Fe-40Cr against SiC/2618 Al alloy composites |
JIANG Lan, JIANG Yan-li, YU Liang, SU Nan, DING You-dong |
2913 |
| Butt joining of Al-Cu bilayer sheet through friction stir welding |
R. BEYGI, M. KAZEMINEZHAD, A. H. KOKABI |
2925 |
| Fatigue behavior and life prediction of A7N01 aluminium alloy welded joint |
LIU Xue-song, ZHANG Liang, WANG Lin-sen, WU Shuang-hui, FANG Hong-yuan |
2930 |
| Gas tungsten arc welding of CP-copper to 304 stainless steel using different filler materials |
Sajjad Gholami SHIRI, Mohsen NAZARZADEH, Mahmood SHARIFITABAR, Mehdi Shafiee AFARANI |
2937 |
| Influence of hydrogen content on room temperature compressive properties of Ti-6Al-4V alloy at high strain rate |
YUAN Bao-guo, YU Hai-ping, LI Chun-feng |
2943 |
| Friction coefficient in rubber forming process of Ti-15-3 alloy |
SUN Yong-na, WAN Min, WU Xiang-dong |
2952 |
| Microstructure and mechanical properties of Ti-45Al-5.5(Cr,Nb,B,Ta) alloy sintered at different SPS temperatures |
XIAO Shu-long, XU Li-juan, YU Hong-bao, TIAN Jing, CHEN Yu-yong |
2960 |
| Hot compressive behavior of Ti-3.0Al-3.7Cr-2.0Fe-0.1B titanium alloy |
WANG Guo, HUI Song-xiao, YE Wen-jun, MI Xu-jun |
2965 |
| Functional Materials |
| Preparation of ultra-fine fibrous Fe-Ni alloy powder by coordinated co-precipitation-direct reduction process |
ZHANG Chuan-fu, YAO Yong-lin, ZHANG Yin-liang, ZHAN Jing |
2972 |
| Properties of magneto-rheological fluids based on amorphous micro-particles |
DONG Xu-feng, MA Ning, QI Min, LI Jin-hai, GUAN Xin-chun, OU Jin-ping |
2979 |
| Synthesis of (Ca, Mg)-α′-Sialon-AlN-BN powders from boron-rich blast furnace slag by microwave carbothermal reduction-nitridation |
JIANG Tao, XUE Xiang-xin |
2984 |
| Effects of reaction parameters on preparation of Cu nanoparticles via aqueous solution reduction method with NaBH4 |
LIU Qing-ming, ZHOU De-bi, Yu-ya YAMAMOTO , Kensuke KURUDA , Masazumi OKIDO |
2991 |
| Preparation and oxidation resistance of mullite/SiC coating for carbon materials at 1150 °C |
YANG Xin, SU Zhe-an, HUANG Qi-zhong, CHAI Li-yuan |
2997 |
| Structural and optical properties of nano-spin coated sol-gel porous TiO2 films |
M. M. El-NAHASS, M. H. ALI, A. El-DENGLAWEY |
3003 |
| Characteristics of microstructure and performance of laser-treated electroless Ni-P/Ni-W-P duplex coatings |
LIU Hong, GUO Rong-xin, LIU Zhu |
3012 |
| Evaluation on residual stresses of silicon-doped CVD diamond films using X-ray diffraction and Raman spectroscopy |
CHEN Su-lin, SHEN Bin, ZHANG Jian-guo, WANG Liang, SUN Fang-hong |
3021 |
| Nanogrinding of SiC wafers with high flatness and low subsurface damage |
HUO Feng-wei, GUO Dong-ming, KANG Ren-ke, FENG Guang |
3027 |
| Influence of heat treatment on electrochemical properties of Ti1.4V0.6Ni alloy electrode containing icosahedral quasicrystalline phase |
LIU Wan-qiang, ZHANG Shan-shan, WANG Li-min |
3034 |
| Effects of Hg and Ga on microstructures and electrochemical corrosion behaviors of Mg anode alloys |
ZHANG Jia-pei, WANG Ri-chu, FENG Yan, PENG Chao-qun |
3039 |
| Haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy with surface heparinization using electrostatic self assembly technology |
YU Sen, YU Zhen-tao, HAN Jian-ye, WANG Gui, NIU Jin-long, Matthew S. Dargusch |
3046 |
| Photocatalytic activity of Fe-doped diopside |
YANG He, YANG Ze-jian, HAN Chong, LI Qiang, XUE Xiang-xin |
3053 |
| Computational Materials Science and Numerical Mode |
| Calculation of thermodynamic properties in liquid phase for ternary Al-Ni-Zn alloys |
D. &#,IVKOVI&#,, Y. DU, N. TALIJAN, A. KOSTOV, Lj. BALANOVI&#, |
3059 |
| Multi-field dynamic modeling and numerical simulation of aluminum alloy resistance spot welding |
TAO Jian-feng, GONG Liang, LIU Cheng-liang, ZHAO Yang |
3066 |
| Effect of process parameters on sheath forming of continuous extrusion sheathing of aluminum |
ZHAO Ying, SONG Bao-yun, YUN Xin-bing, PEI Jiu-yang, JIA Chun-bo, YAN Zhi-yong |
3073 |
| Mine Engineering, Metallurgical Engineering, Chemi |
| Three-dimensional simulation of pore scale fluid flow in granular ore media with realistic geometry |
YANG Bao-hua, WU Ai-xiang, WANG Chun-lai, NIU Wen-xin, LIU Jin-zhi |
3081 |
| Three-dimensional analytical solution of acoustic emission or microseismic source location under cube monitoring network |
DONG Long-jun, LI Xi-bing |
3087 |
| Infrared thermography for prediction of spontaneous combustion of sulfide ores |
LI Zi-jun, SHI Dong-ping, WU Chao, WANG Xiao-lei |
3095 |
| Purification of metallurgical grade silicon by electrorefining in molten salts |
CAI Jing, LUO Xue-tao,LU Cheng-hao, Geir Martin HAARBERG, Annabelle LAURENT, Ole Edvard KONGSTEIN, WANG Shu- |
3103 |
| Effect of Na2O on formation of calcium aluminates in CaO-Al2O3-SiO2 system |
YU Hai-yan, PAN Xiao-lin, WANG Bo, ZHANG Wu, SUN Hui-lan, BI Shi-wen |
3108 |
| Abnormal resistivity and viscosity behavior in Sb-rich Pb-Sb melts |
GUO Feng-xiang, WANG Wei, YANG Hai-long, QIN Jing-yu, TIAN Xue-lei |
3113 |
| Effect of moderately thermophilic bacteria on metal extraction and electrochemical characteristics for zinc smelting slag in bioleaching system |
JIANG Kai-qi, GUO Zhao-hui, XIAO Xi-yuan, WEI Xiao-ying |
3120 |
| Solvent impregnated resin prepared using ionic liquid Cyphos IL 104 for Cr(VI) removal |
YANG Xiu-yun, ZHANG Jian-ping, GUO Lin, ZHAO He, ZHANG Yang, CHEN Ji |
3126 |
| Adsorption of lead and cadmium ions from aqueous solutions using manganoxide minerals |
Aylin SÖ,NMEZAY, M. SALIM Ö,NCEL, Nihal BEKTA&#, |
3131 |
| Removal of cadmium from aqueous solutions using red mud granulated with cement |
JU Shao-hua, LU Shuai-dan,PENG Jin-hui, ZHANG Li-bo, C. SRINIVASAKANNAN, GUO Sheng-hui, LI Wei |
3140 |
| Effect of surfactant Tween-80 on sulfur oxidation and expression of sulfur metabolism relevant genes of Acidithiobacillus ferrooxidans |
PENG An-an, LIU Hong-chang, NIE Zhen-yuan, XIA Jin-lan |
3147 |
| Mechanism of anti-arterial thrombosis of Dahuangzhecong Fang screened by Ti-Al intermetallic compound porous material |
WAN Ling, WANG Zhan-yi, WEI Xing, LI Ji-yang, ZHONG Guang-wei, DUAN Xiao-peng, HE Fu-yuan, JIANG Yao
| 3156 |
