| Structural Materials |
| Microstructural evolution of 2026 aluminum alloy during hot compression and subsequent heat treatment |
ZHANG Hui, CHEN Rong, HUANG Xu-dong, CHEN Jiang-hua |
955 |
| Effect of welding processes on AA2219 aluminium alloy joint properties |
S. MALARVIZHI, V. BALASUBRAMANIAN |
962 |
Effect of axial force on microstructure and tensile properties of
friction stir welded AZ61A magnesium alloy |
A. RAZAL ROSE, K. MANISEKAR,V. BALASUBRAMANIAN |
974 |
Influence of serpentine channel pouring process parameters on
semi-solid A356 aluminum alloy slurry |
CHEN Zheng-zhou, MAO Wei-min, WU Zong-chuang |
985 |
Production of Mg-Al-Zn magnesium alloy sheets with
ultrafine-grain microstructure by accumulative roll-bonding |
ZHAN Mei-yan, ZHANG Wei-wen, ZHANG Da-tong |
991 |
High cycle fatigue behavior of the second generation single
crystal superalloy DD6 |
SHI Zhen-xue, LI Jia-rong, LIU Shi-zhong, HAN Mei |
998 |
| Influence of Cr addition on microstructure of a 5% Re-containing single crystal nickel-based superalloy |
TAN Xi-peng, LIU Jin-lai, JIN Tao, SUN Xiao-feng, HU Zhuang-qi |
1004 |
| Quantitative analysis of homogenization treatment of INCONEL718 superalloy |
MIAO Zhu-jun, SHAN Ai-dang, WU Yuan-biao,LU Jun, XU Wen-liang, SONG Hong-wei |
1009 |
| Microstructure evolution and grain growth behavior of Ti14 alloy during semi-solid isothermal process |
CHEN Yong-nan, WEI Jian-feng, ZHAO Yong-qing, ZHENG Jing |
1018 |
| Interfacial microstructure and chemical stability during diffusion bonding of single crystal Al2O3-fibres with Ni25.8Al9.6Ta8.3Cr matrix |
WAN Xiao-jun, LIN Jian-guo |
1023 |
| Grain refinement process of pure iron target under hypervelocity impact |
NI Chuan-hao, XU Qiang, WANG Fu-chi |
1029 |
Contact reactive brazing of Al alloy/Cu/stainless steel joints and
dissolution behaviors of interlayer |
WU Ming-fang, SI Nai-chao, CHEN Jian |
1035 |
| Functional Materials |
Formation mechanism of MgB2 in 2LiBH4 + MgH2 system for
reversible hydrogen storage |
KOU Hua-qin, XIAO Xue-zhang, CHEN Li-xin, LI Shou-quan, WANG Qi-dong |
1040 |
Influence of freezing rate on microstructure and electrochemical properties of
Mg-2%Ga alloys |
FENG Yan, WANG Ri-chu, PENG Chao-qun |
1047 |
| Oxidation behaviors of electrodeposited nickel-cobalt coatings in air at 960 °C |
ZHOU Ke-chao, MA Li, LI Zhi-you |
1052 |
Impedance spectroscopy study of high-temperature oxidation of
Gd2O3-Yb2O3 codoped zirconia thermal barrier coatings |
ZHANG Dan-hua, GUO Hong-bo, GONG Sheng-kai |
1061 |
| Microstructure and mechanical properties of TiN/TiAlN multilayer coatings deposited by arc ion plating with separate targets |
WEI Yong-qiang, LI Chun-wei, GONG Chun-zhi, TIAN Xiu-bo, YANG Shi-qin |
1068 |
Effects of addition of NH4HCO3 on pore characteristics and
compressive properties of porous Ti-10%Mg composites |
WANG Yue-qin, TAO Jie, ZHANG Jin-long, WANG Tao |
1074 |
Sintering of WC-10%Co nano powders containing TaC and
VC grain growth inhibitors |
M. MAHMOODAN, H. ALIAKBARZADEH, R. GHOLAMIPOUR |
1080 |
Binding tendency with oligonucleotides and cell toxicity of
cetyltrimethyl ammonium bromide-coated single-walled carbon nanotubes |
YAN Xue-bin, GU Yong-hong, HUANG Dong, GAN Li, WU Li-xiang,HUANG Li-hua, CHEN Zhe-dong, HUANG Su-ping
| 1085 |
|
| Computational Materials Science and Numerical Mode |
| Characteristic atom occupation patterns of Au3Cu, AuCu3, AuCuI and AuCuII based on experimental data of disordered alloys |
XIE You-qing, LI Yan-fen, LIU Xin-bi, LI Xiao-bo, PENG Hong-jian, NIE Yao-zhuang |
1092 |
Ageing process of pre-precipitation phase in Ni0.75Al0.05Fe0.2 alloy
based on phase field method |
DONG Wei-ping, WANG Yong-xin, CHEN Zheng, YANG Kun |
1105 |
Prediction of edge cracks and plastic-damage analysis of
Mg alloy sheet in rolling |
ZHANG Ding-fei, DAI Qing-wei, FANG Lin, XU Xing-xing |
1112 |
Plastic forming simulations of cold isostatic pressing of
selective laser sintered components |
DU Yan-ying, SHI Yu-sheng, WEI Qing-song |
1118 |
Effects of annulus gap on flow and temperature field in
electromagnetic direct chill casting process |
TANG Meng-ou, XU Jun, ZHANG Zhi-feng, BAI Yue-long |
1123 |
| Mine Engineering, Metallurgical Engineering, Chemi |
| Calculation of hydrogen solubility in molten alloys |
JIANG Guang-rui, LI Yan-xiang, LIU Yuan |
1130 |
| Solubility and phase diagrams of hydroxyl manganese chloride |
WANG Yun-shan, ZHANG Jin-ping, YANG Gang |
1136 |
| Thermodynamic analysis on synthesis of fibrous Ni-Co alloys precursor and Ni/Co ratio control |
ZHAN Jing, HE Yue-hui, ZHOU Di-fei, ZHANG Chuan-fu |
1141 |
Effect of surface dissolution on flotation separation of
fine ilmenite from titanaugite |
ZHU Yang-ge, ZHANG Guo-fan, FENG Qi-ming, YAN Dai-cui, WANG Wei-qing |
1149 |
Collecting performances of N-dodecylethylene-diamine and
its adsorption mechanism on mineral surface |
LIU Wen-gang, WEI De-zhou, CUI Bao-yu |
1155 |
| Pyrite depression in marmatite flotation by sodium glycerine-xanthate |
HE Ming-fei, QIN Wen-qing, LI Wei-zhong, ZENG Ke |
1161 |
| Effect of metallic ions on dispersibility of fine diaspore |
ZHOU Yu-lin, HU Yue-hua, WANG Yu-hua |
1166 |
| New resistivity/dopant density model for compensated-Si |
Dominic LEBLANC, Karol PUTYERA |
1172 |
Removal of boron from metallurgical grade silicon by
electromagnetic induction slag melting |
LUO Da-wei, LIU Ning, LU Yi-ping, ZHANG Guo-liang, LI Ting-ju |
1178 |
| Low-temperature purification process of metallurgical silicon |
ZHAO Li-xin, WANG Zhi, GUO Zhan-cheng, LI Cheng-yi |
1185 |
