| Structural Materials |
Mechanical properties and stress corrosion cracking behaviour of
AZ31 magnesium alloy laser weldments |
P. B. SRINIVASAN, S. RIEKEHR, C. BLAWERT, W. DIETZEL, M. KOÇ,AK |
1 |
| Microstructure of spray formed Al-Zn-Mg-Cu alloy with Mn addition |
CAI Yuan-hua, LIANG Rui-guang, SU Zhan-pei, ZHANG Ji-shan |
9 |
Microstructure evolution and mechanical properties of Mg-x%Zn-1%Mn
(x=4, 5, 6, 7, 8, 9) wrought magnesium alloys |
ZHANG Ding-fei, SHI Guo-liang, ZHAO Xia-bing, QI Fu-gang |
15 |
Effects of heat treatment on microstructure of
directionally solidified Ti-45Al-8Nb-(W, B, Y) alloy |
DING Xian-fei, LIN Jun-pin, ZHANG Lai-qi, CHEN Guo-liang |
26 |
| Effect of impinging angle and rotating speed on erosion behavior of aluminum |
A. K. JHA, R. BATHAM, M. AHMED, A. K. MAJUMDER, O. P. MODI, S. CHATURVEDI, A. K. GUPTA |
32 |
Quasi-static and dynamic tensile behaviors in electron beam
welded Ti-6Al-4V alloy |
ZHANG Jing, TAN Cheng-wen, REN Yu, WANG Fu-chi, CAI Hong-nian |
39 |
Dynamic behavior and fracture mode of TiAl intermetallics with
different microstructures at elevated temperatures |
ZAN Xiang, HE Yue-hui, WANG Yang, XIA Yuan-ming |
45 |
Effect of silicon on phase selection of ternary compounds during
solidification of ZA84 magnesium alloy |
ZHANG Chun-xiang, GUAN Shao-kang, LIU Tao, LI Shao-hua, LIU Zhong-xia |
52 |
Microstructures and interfacial quality of diffusion bonded
TC21 titanium alloy joints |
LIU Hui-jie, FENG Xiu-li |
58 |
Effect of melt convection on primary dendrite arm spacing in
directionally solidified Pb-26%Bi hypo-peritectic alloys |
HU Xiao-wu, LI Shuang-ming, GAO Si-feng, LIU Lin, FU Heng-zhi |
65 |
| Effect of cryogenic cooling in milling process of AISI 304 stainless steel |
Muammer NALBANT, Yakup YILDIZ |
72 |
| Functional Materials |
Correlation between pre-peak in structure factor and physical properties in
Al-based amorphous alloys |
LI Rui, WANG Wei-min, MA Hai-jian, LI Gui-hua, QIN Jing-yu, ZHANG Zhong-hua, TANG Xing-wei |
80 |
Influence of solidification mode on pore structure of
directionally solidified porous Cu-Mn alloy |
JIANG Guang-rui, LI Yan-xiang, LIU Yuan |
88 |
| Ni56Mn25−xCrxGa19 (x=0, 2, 4, 6) high temperature shape memory alloys |
MA Yun-qing, LAI San-li, YANG Shui-yuan, LUO Yu, WANG Cui-ping, LIU Xing-jun |
96 |
Effect of additive BaO on corrosion resistance of xCu/(10NiO-NiFe2O4)
cermet inert anodes for aluminum electrolysis |
HE Han-bing, XIAO Han-ning, ZHOU Ke-chao |
102 |
| Microstructure and magnetic properties of Ni-Zn ferrites doped with MnO2 |
SU Hua, ZHANG Huai-wu, TANG Xiao-li, JING Yu-lan |
109 |
Effects of synthesis conditions on layered Li[Ni1/3Co1/3Mn1/3]O2 positive-electrode via hydroxide co-precipitation method for
lithium-ion batteries |
HU Chuan-yue, GUO Jun, DU Yong, XU Hong-hui, HE Yue-hui |
114 |
| Microstructural evolution of melt-spun Mg-10Ni-2Mm hydrogen storage alloy |
WU Ying, XING Na, LU Zhi-chao, HAN Wei, ZHOU Shao-xiong, J. K. SOLBERG, V. A. YARTYS |
121 |
Preparation of high active Pt/C cathode electrocatalyst for
direct methanol fuel cell by citrate-stabilized method |
JIANG Qing-lai, PENG Zhong-dong, XIE Xiao-feng,DU Ke, HU Guo-rong, LIU Ye-xiang |
127 |
| Effect of citric acid on microstructure and electrochemical characteristics of high voltage anodized alumina film formed on etched Al Foils |
BAN Chao-lei, HE Ye-dong, SHAO Xin |
133 |
| Computational Materials Science and Numerical Mode |
| Thermodynamic optimization of Bi-Ni binary system |
WANG Jiang, MENG Fan-gui, LIU Li-bin, JIN Zhan-peng |
139 |
Thermodynamic analysis of growth of ternary III-V semiconductor
materials by molecular-beam epitaxy |
YE Zhi-cheng, SHU Yong-chun, CAO Xue, GONG Liang, PI Biao,YAO Jiang-hong, XING Xiao-dong, XU Jing-jun |
146 |
Texture evolution and its simulation of cold drawing copper
wires produced by continuous casting |
CHEN Jian, YAN Wen, LI Wei, MIAO Jian, FAN Xin-hui |
152 |
| Constructing processing map of Ti40 alloy using artificial neural network |
SUN Yu, ZENG Wei-dong, ZHAO Yong-qing,ZHANG Xue-min, MA Xiong, HAN Yuan-fei |
159 |
| Mine Engineering, Metallurgical Engineering, Chemi |
Electrochemical investigation on kinetics of potassium intercalating
into graphite in KF melt |
LIU Dong-ren, LI Wang-xing, YANG Zhan-hong, QIU Shi-lin, LUO Ying-tao |
166 |
| Kinetics of AlOOH dissolving in caustic solution studied by high-pressure DSC |
BAO Li, ZHANG Ting-an, DOU Zhi-he, LÜ, Guo-zhi,GUO Yong-nan, NI Pei-yuan, WU Xu-jian, MA Jia |
173 |
Electrochemical behaviors of tantalum in
anhydrous ethanol containing hydrogen sulfate ions |
YANG Hai-ping, YANG Sheng-hai, CAI Ya-nan, HOU Guo-feng, XIA Jiao-yun, TANG Mo-tang |
179 |
| Preparation of TiC powders by carbothermal reduction method in vacuum |
SEN Wei, XU Bao-qiang, YANG Bin, SUN Hong-yan,SONG Jian-xun, WAN He-li, DAI Yong-nian,
| 185 |
Leaching behavior of metals from limonitic laterite ore by
high pressure acid leaching |
GUO Xue-yi, SHI Wen-tang, LI Dong, TIAN Qing-hua |
191 |
Solidification of horizontally continuous casting of super-thin slab in
stable magnetic field and alternating current |
ZHANG Xiao-wei, HUANG Jin-feng, DENG Kang, REN Zhong-ming |
196 |
| Microwave drying characteristics and kinetics of ilmenite |
LI Yu, LEI Ying, ZHANG Li-bo, PENG Jin-hui, LI Chang-long |
202 |
| Effect of sodium hexametaphosphate on separation of serpentine from pyrite |
LU Yi-ping, ZHANG Ming-qiang, FENG Qi-ming, LONG Tao, OU Le-ming, ZHANG Guo-fan |
208 |
