Material Development and Alloy Design |
Effect of Si, Cu and Fe on mechanical properties of
cast semi-solid 206 alloys |
A. LEMIEUX, J. LANGLAIS, D. BOUCHARD, X. GRANT CHEN |
1555 |
Compocasting of A356-CNT composite |
B. ABBASIPOUR, B. NIROUMAND, S. M. MONIR VAGHEFI |
1561 |
Recycling of minute metal scraps by semisolid processing:
Manufacturing of design materials |
S. SUGIYAMA, T. MERA, J. YANAGIMOTO |
1567 |
Commercial AM60 alloy for semisolid processing:
Alloy optimization and thermodynamic analysis |
LI Yuan-dong(李元东), D. APELIAN, XING Bo(邢博), MA Ying(马颖), HAO Yuan(郝远) |
1572 |
Microstructure and Properties |
Observation of interface of two kinds of bi-metal composite parts prepared by thixo-forging |
YANG Zhao(杨昭) , ZHOU Li(周丽), DONG Jian-xiong(董建雄) |
1579 |
Microstructure evolution during reheating of
extruded Mg-Gd-Y-Zr alloy into semisolid state |
GAO Lei(高磊), LIANG Song-mao(梁松茂), CHEN Rong-shi(陈荣石), HAN En-hou(韩恩厚) |
1585 |
New method of direct chill casting of Al-6Si-3Cu-Mg semisolid billet by annulus electromagnetic stirring |
TANG Meng-ou(汤孟欧), XU Jun(徐骏), ZHANG Zhi-feng(张志峰), BAI Yue-long(白月龙) |
1591 |
Tensile properties of as-deformed 2A50 aluminum alloy in semi-solid state |
DU Zhi-ming(杜之明), CHEN Gang(陈刚), LIU Jun(柳君), XIE Shui-sheng(谢水生) |
1597 |
Microstructure and properties of high silicon aluminum alloy with 2% Fe prepared by rheo-casting |
ZHONG Gu(钟鼓), WU Shu-sen(吴树森), AN Ping(安萍), MAO You-wu(毛有武), LI Shi-zhao(李世钊) |
1603 |
Microstructure and mechanical properties of A356 thixoformed alloys in
comparison with gravity cast ones using new criterion |
A. FADAVI BOOSTANI, S. TAHAMTAN |
1608 |
Microstructural evolution during partial remelting of AM60B magnesium alloy refined by MgCO3 |
CHEN Ti-jun(陈体军), MA Ying(马颖), WANG Rui-quan(王瑞全), LI Yuan-dong(李元东), HAO Yuan(郝远) |
1615 |
Microstructure of partially remelted billet of AM60 alloy prepared with self-inoculation method |
XING Bo(邢博), LI Yuan-dong(李元东), MA Ying(马颖),CHEN Ti-jun(陈体军), HAO Yuan(郝远) |
1622 |
Microstructure and tensile properties of AM50A magnesium alloy
prepared by recrystallisation and partial melting process |
ZHAO Zu-de(赵祖德), CHEN Qiang(陈强), HUANG Shu-hai(黄树海),KANG Feng(康凤), WANG Yan-bin(王艳彬) |
1630 |
Rheological characterization of A201 aluminum alloy |
A. BLANCO, Z. AZPILGAIN, J. LOZARES, P. KAPRANOS, I. HURTADO |
1638 |
Effect of sodium modification on microstructure and mechanical properties of thick-walled AlSi6Cu2.5 rheocast component |
M. WESSÉ,N, N. E. ANDERSSON, O. GRANATH |
1643 |
Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy |
R. CANYOOK, S. PETSUT, S. WISUTMETHANGOON, M. C. FLEMINGS, J. WANNASIN |
1649 |
Inconel 617 and Stellite 6 alloys for tooling in thixoforming of steels |
Y. BIROL |
1656 |
Microstructural evolution during semisolid state strain induced melt activation process of aluminum 7075 alloy |
A. BOLOURI, M. SHAHMIRI, E. N. H. CHESHMEH |
1663 |
Coarsening rate of microstructure in semi-solid aluminium alloys |
H. V. ATKINSON, D. LIU |
1672 |
Taper barrel rheomoulding process for semi-solid slurry preparation and microstructure evolution of A356 aluminum alloy |
ZHANG Fan(张帆), KANG Yong-lin(康永林), YANG Liu-qing(杨柳青), DING Rui-hua(丁瑞华) |
1677 |
Microstructure refinement of AZ31 alloy solidified with pulsed magnetic field |
WANG Bin(汪彬), YANG Yuan-sheng(杨院生), SUN Ming-li(孙明礼) |
1685 |
Rheology, Modelling and Simulation |
Analysis of semi-solid response under rapid compression tests using
multi-scale modelling and experiments |
V. FAVIER, H. ATKINSON |
1691 |
Modeling of shear induced coarsening effects in semi-solid alloys |
M. MODIGELL, A. POLA |
1696 |
Evaluation of pitting corrosion of thixoformed A356 alloy using a simulation model |
S. TAHAMTAN, A. FADAVI BOOSTANI |
1702 |
Numerical simulation on thixoforging of electronic packaging shell with SiCp/A356 composites |
WANG Kai-kun(王开坤), WANG Fu-yu(汪富玉), CHEN Xue-jun(陈学军),WANG Lu(王璐), MA Chun-mei(马春梅) |
1707 |
Process Development |
Conception of tooling adapted to thixoforging of high solid fraction hot-crack-sensitive aluminium alloys |
G. VANEETVELD, A. RASSILI, J. C. PIERRET, J. LECOMTE-BECKERS |
1712 |
Semi-solid near-net shape rheocasting of
heat treatable wrought aluminum alloys |
U. A. CURLE |
1719 |
Deformation mechanism and forming properties of 6061Al alloys during
compression in semi-solid state |
SHANG Shu-zhen(尚淑珍), LU Gui-min(路贵民), TANG Xiao-ling(唐小玲),ZHAO Zu-xin(赵祖欣), WU Cheng-ming(吴成明) |
1725 |
Preparation and thixoforging of semisolid billet of AZ80 magnesium alloy |
JIANG Ju-fu(姜巨福), WANG Ying(王迎), QU Jian-jun(曲建俊),DU Zhi-ming(杜之明), LUO Shou-jing(罗守靖) |
1731 |
Damage prediction for magnesium matrix composites formed by
liquid-solid extrusion process based on finite element simulation |
QI Le-hua(齐乐华), LIU Jian(刘健), GUAN Jun-tao(关俊涛),SU Li-zheng(苏力争), ZHOU Ji-ming(周计明) |
1737 |
Semi-solid processing of hypereutectic A390 alloys using
novel rheoforming process |
M. TEBIB, J. B. MORIN, F. AJERSCH, X. GRANT CHEN |
1743 |
Shear band formation in shaped rheocast aluminium component at
various plunger velocities |
M. BLADH, M. WESSÉ,N, A. K. DAHLE |
1749 |
Feasibility of semi-solid die casting of ADC12 aluminum alloy |
S. JANUDOM, T. RATTANOCHAIKUL, R. BURAPA, S. WISUTMETHANGOON, J. WANNASIN |
1756 |
Development of aluminum rheo-extrusion process using
semi-solid slurry at low solid fraction |
T. RATTANOCHAIKUL, S. JANUDOM, N. MEMONGKOL, J. WANNASIN |
1763 |
Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry |
MAO Wei-min(毛卫民), ZHENG Qiu(郑秋), ZHU Da-ping(朱达平) |
1769 |
Industrial Applications and Others |
Semisolid lead-antimony alloys for cars batteries
|
A. POLA, M. GELFI, M. MODIGELL, R. ROBERTI |
1774 |
Application of shortened heat treatment cycles on A356 automotive brake calipers with respective globular and dendritic microstructures |
H. Mö,LLER, G. GOVENDER, W. E. STUMPF |
1780 |
High-quality aluminum turbocharger impellers produced by thixocasting |
G. WALLACE, A. P. JACKSON, S. P. MIDSON, Q. ZHU |
1786 |
Semisolid joining of aluminum A356 alloy by
partial remelting and mechanical stirring |
S. M. J. ALVANI, H. AASHURI, A. KOKABI, R. BEYGI |
1792 |
Numerical simulation and experimental study for rheo-forged component using direct and indirect die system |
H. H. KIM, C. G. KANG |
1799 |
Theory and application research development of semi-solid forming in China |
LUO Shou-jing(罗守靖), W. C. KEUNG(姜永正) |
1805 |