Structural Materials |
Effects of whisker surface treatment on microstructure and properties of Al18B4O33w/6061Al composites |
GENG Lin(耿林), GUAN Li-na(关丽娜), LÜ, Kui-ming(吕奎明) |
349 |
Effects of rheoforming on microstructures and mechanical properties of 7075 wrought aluminum alloy |
GUO Hong-min(郭洪民), YANG Xiang-jie(杨湘杰), WANG Jia-xuan(王家宣),HU Bin(胡斌), ZHU Guang-lei(朱光磊) |
355 |
Characteristics of two Al based functionally gradient
composites reinforced by primary Si particles and Si/
in situ Mg2Si particles in centrifugal casting |
ZHAI Yan-bo(翟彦博), LIU Chang-ming(刘昌明), WANG Kai(王开), ZOU Mao-hua(邹茂华), XIE Yong(谢勇) |
361 |
Friction and wear of 7075 aluminum alloy induced by torsional fretting |
CAI Zhen-bing(蔡振兵), ZHU Min-hao(朱旻昊), LIN Xiu-zhou(林修洲) |
371 |
Effect of Sb on microstructure and mechanical properties in
Mg-10Zn-5Al high zinc magnesium alloys |
ZHANG Jin-shan(张金山), ZHANG Zhao-guang(张照光), ZHANG Yu-hua(张玉华),LI Shan-hu(李山虎), LIU Ya-li(刘雅丽) |
377 |
Microstructure and mechanical properties of Mg-6Al-0.3Mn-xY alloys
prepared by casting and hot rolling |
SU Gui-hua(苏桂花), ZHANG Liang(张亮), CHENG Li-ren(程丽任),LIU Yong-bing(刘勇兵), CAO Zhan-yi(曹占义) |
383 |
Preparation of porous Ti35Nb alloy and its mechanical properties under
monotonic and cyclic loading |
LIN Jian-guo(林建国), ZHANG Yun-fei(张云飞), MA Mo(马蓦) |
390 |
Manufacturing techniques of armor strips excavated from
Emperor Qin Shi Huang’s mausoleum, China |
LIAO Ling-min(廖灵敏), PAN Chun-xu(潘春旭), MA Yu(马宇) |
395 |
Forming mechanism of integral serrated high fins by
plowing-extruding based on variational feed |
WAN Zhen-ping(万珍平), YAN Hui(燕辉), TANG Yong(汤勇) |
400 |
Functional Materials |
Hydrogen storage behaviours of nanocrystalline and amorphous
Mg20Ni10−xCox (x=0−4) alloys prepared by melt spinning |
ZHANG Yang-huan(张羊换), ZHAO Dong-liang(赵栋梁), LI Bao-wei(李保卫),QI Yan(祁焱), GUO Shi-hai(郭世海), WANG Xin-lin(王新林)
405 |
|
Creep behavior of SnAgCu solders with rare earth Ce doping |
ZHANG Liang(张亮), XUE Song-bai(薛松柏), GAO Li-li(皋利利), ZENG Guang(曾广),CHEN Yan(陈燕), YU Sheng-lin(禹胜林), |
412 |
Ultrasonic characterization of modified Cr2O3 coatings by
reflection coefficient spectroscopy |
LI Ji-cheng(李继承), LIN Li (林莉),LI Xi-meng(李喜孟), LI Guang(李光), LEI Ming-kai(雷明凯) |
418 |
Effect of surface nanocrystallization and PPEC time on
complex nanocrystalline hard layer fabricated by plasma electrolysis |
M. ALIOFKHAZRAEI, SH. AHANGARANI, A. SABOUR ROUHAGHDAM |
425 |
Sol-gel synthesis and photoluminescence of LaPO4׃Eu3+ nanorods |
GAO Rui(高锐), QIAN Dong(钱东), LI Wei(李卫) |
432 |
Catalytic performance and kinetics of Au/γ-Al2O3 catalysts for
low-temperature combustion of light alcohols |
DENG Qian(邓谦), LI Xiao-mei(李小梅), PENG Zhen-shan(彭振山),LONG Yun-fei(龙云飞), XIANG Long-ming(相龙明), CAI Tie-jun(蔡铁军)< |
437 |
Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering |
LI Xiao-qiang(李小强), XIN Hong-wei(辛红伟), HU Ke(胡可), LI Yuan-yuan(李元元) |
443 |
Computational Materials Science and Numerical Modelling |
Thermodynamic assessment of Mg-Ga binary system |
MENG Fan-gui(孟凡桂), WANG Jiang(王江), RONG Mao-hua(戎茂华),LIU Li-bin(刘立斌), JIN Zhan-peng(金展鹏) |
450 |
Identification of nucleation parameter for cellular automaton model of
dynamic recrystallization |
JIN Zhao-yang(金朝阳), LIU Juan(刘娟), CUI Zhen-shan(崔振山), WEI Dong-lai(韦东来) |
458 |
Differences of grain-refining effect of Sc and Ti additions in aluminum by empirical electron theory analysis |
YE Yi-cong(叶益聪), HE Liang-ju(何良菊), LI Pei-jie(李培杰) |
465 |
Application of new VBHF optimization strategy to improve formability of automobile panels with aluminum alloy sheet |
WANG Wu-rong(王武荣), CHEN Guan-long(陈关龙), LIN Zhong-qin(林忠钦) |
471 |
Numerical and physical simulation of new SPD method combining extrusion and equal channel angular pressing for AZ31 magnesium alloy |
ZHANG Ding-fei(张丁非), HU Hong-jun(胡红军), PAN Fu-sheng(潘复生), YANG Ming-bo(杨明波), ZHANG Jun-ping(张钧萍) |
478 |
Cross-sectional distortion behaviors of thin-walled rectangular tube in
rotary-draw bending process |
ZHAO Gang-yao(赵刚要), LIU Yu-li(刘郁丽), YANG He(杨合), LU Cai-hong(卢彩红) |
484 |
Effect of nonlinear liquidus and solidus on dendrite growth in
bulk undercooled melts |
CHEN Zheng(陈正), WANG Hai-feng(王海丰), LIU Feng(刘峰), YANG Wei(杨伟) |
490 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Flotation techniques for separation of diaspore from bauxite using
Gemini collector and starch depressant |
XIA Liu-yin(夏柳荫), ZHONG Hong(钟宏), LIU Guang-yi(刘广义) |
495 |
Effect of vacancy defects on electronic properties and activation of
sphalerite (110) surface by first-principles |
CHEN Jian-hua(陈建华), CHEN Ye(陈晔), LI Yu-qiong(李玉琼) |
502 |
Isolation, characterization and extraction of mer gene of Hg2+ resisting strain D2 |
ZENG Xiao-xi(曾晓希), TAGN Jian-xin(汤建新), JIANG Pei(蒋佩),LIU Hong-wei(刘宏伟), DAI Zhi-min(戴志敏), LIU Xue-duan(刘学端)
507 |
|
Application of ionic liquids in hydrometallurgy of nonferrous metals |
TIAN Guo-cai(田国才), LI Jian(李坚), HUA Yi-xin(华一新) |
513 |
Adjustment on gibbsite and boehmite co-precipitation from
supersaturated sodium aluminate solutions |
WANG Zhi(王志), YANG Liu(杨柳), ZHANG Juan(张娟),GUO Zhan-cheng(郭占成), ZHANG Yi(张懿) |
521 |
Periodical attenuation of Al(OH)3 particles from seed precipitation in
seeded sodium aluminate solution |
WU Yu-sheng(吴玉胜), ZHANG Di(张迪), LI Ming-chun(李明春),BI Shi-wen(毕诗文), YANG Yi-hong(杨毅宏) |
528 |
Selective separation of copper and cadmium from zinc solutions by
low current density electrolysis |
YANG Bo(杨卜), WANG Cheng-yan(王成彦), LI Dun-fang(李敦钫),YIN Fei(尹飞), CHEN Yong-qiang(陈永强), WANG Nian-wei(王念卫) |
533 |