Review of micromachining of ceramics by etching |
H. T. TING, K. A. ABOU-EL-HOSSEIN, H. B. CHUA |
1 |
Optimum condition by mechanical characteristic evaluation infriction stir welding for 5083-O Al alloy |
Min-Su HAN, Seung-Jun LEE, Jae-Cheul PARK, Seok-Cheol KO, Yong-Bin WOO, Seong-Jong KIM |
17 |
Friction stir welding of 5052 aluminum alloy plates |
Yong-Jai KWON, Seong-Beom SHIM, Dong-Hwan PARK |
23 |
Surface treatment to improve corrosion resistance of
Al plate heat exchangers |
Jong-Soon KIM, Tae-Ho KANG, In-Kwan KIM |
28 |
Influence of cutting parameters on surface characteristics of
cut section in cutting of Inconel 718 sheet using CW Nd:YAG laser |
Dong-Gyu AHN, Kyung-Won BYUN |
32 |
Mechanical and electrochemical characteristics evaluation in
annealing treatment for ship material |
Seok-Ki JANG, Young-Jae JEONG, Seong-Jong KIM |
40 |
Electrochemical characteristics and surface morphology in non-chromate chemical conversion coating for Zn-electroplated steel sheets |
Masazumi OKIDO, Ryoichi ICHINO, Seok-Ki JANG, Seong-Jong KIM |
45 |
Corrosion characteristics of steel in seawater containing various
chloride concentrations generated by electrochemical method |
Seong-Jong KIM, Seok-Ki JANG |
50 |
Effect of annealing on two different niobium-clad
stainless steel PEMFC bipolar plate materials |
Sung-Tae HONG, Dae-Wook KIM, Yong-Joo YOU, K. Scott WEIL |
56 |
Numerical simulation of temperature field in plasma-arc flexible forming of laminated-composite metal sheets |
SONG Wen-qing(宋文庆), XU Wen-ji(徐文骥), WANG Xu-yue(王续跃), MENG Jian-bing(孟建兵), LI Hong-you(李洪友) |
61 |
Densification simulation of compacted Al powders using
multi-particle finite element method |
Kyung-Hun LEE, Jung-Min LEE, Byung-Min KIM |
68 |
Influence of CaO on damping capacity and
mechanical properties of Mg alloy |
Dong-In JANG, Jin-Kyu LEE, Dae-Up KIM, Shae-K KIM |
76 |
Gas sensitivity of indium oxide |
HUANG Shi-zhen, LIN Wei, CHEN Wen-zhe |
80 |
Electrodeposited Ni, Fe, Co and Cu single and
multilayer nanowire arrays on anodic aluminum oxide template |
Bobomurod HAMRAKULOV, In-Soo KIM, M. G. LEE, B. H. PARK |
83 |
Synthesis and microstructure of zirconia nanopowders by
glycothermal processing |
Jun-Seop KIM, Dong-Hae LEE, Sung KANG, Dong-Sik BAE, Hoy-Yul PARK, Moon-Kyeung NA |
88 |
Synthesis and characterization of Ba(CoxNb1−x)O3 nanoparticles byhydrothermal processing |
Hyun-Ju KIM, Min-Cheol CHU, Seong-Jai CHO, Dong-Sik BAE |
92 |
Synthesis and characterization of metallic Pd embedded TiO2 nanoparticles by
reverse micelle and sol-gel processing |
Jeoung-Ho JIN, Min-Cheol CHU, Seong-Jai CHO, Dong-Sik BAE |
96 |
Characterization of MnWO4 with flower-like clusters produced
using spray pyrolysis |
Somchai THONGTEM, Surangkana WANNAPOP, Titipun THONGTEM |
100 |
Silica gel-assisted solvothermal production of CdS, CuxS (x=1, 2) and
ZnS with different morphologies |
Titipun THONGTEM, Chalermchai PILAPONG, Somchai THONGTEM |
105 |
Environmentally friendly hybrid coating prepared by
electro-deposition method at various seawater conditions |
Myeong-Hoon LEE, Kyung-Man MOON, Jong-Do KIM, Kang JUN, Kwang-Ho KIM |
110 |
Comparative study on discharge conditions in micro-hole electrical discharge machining of tungsten carbide (WC-Co) material |
Hyun-Seok TAK, Chang-Seung HA, Dong-Hyun KIM,Ho-Jun LEE, Hae-June LEE, Myung-Chang KANG |
114 |
Antistatic coating material consisting of
poly (butylacrylate-co-styrene) core-nickel shell particle |
Min-Yeong JEONG, Byung-Yoon AHN, Sang-Koul LEE, Won-Ki LEE, Nam-Ju JO |
119 |
Detection of stacking orientation error of CFRP composite laminates using ultrasound waves |
Sun-Kyu KIM, David HSU, Young-Hwan SEO, Kwang-Hee IM |
124 |
Mechanical properties of high-strength concrete subjected to
high temperature by stressed test |
Gyu-Yong KIM, Young-Sun KIM, Tae-Gyu LEE |
128 |
Evaluation of properties of concrete using fluosilicate salts and
metal (Ni, W) compounds |
Gyu-Yong KIM, Eui-Bae LEE, Bae-Su KHIL, Seung-Hun LEE |
134 |
Strain measurement of fiber optic sensor surface bonding on host material |
Shiuh-Chuan HER, Chang-Yu TSAI |
143 |
Three-dimensional machining of insulating ceramics materials with
electrical discharge machining |
Yasushi FUKUZAWA, Naotake MOHRI, Hiromitsu GOTOH,Takayuki TANI |
150 |
Influence of process parameters on drilling characteristics of
Al 1050 sheet with thickness of 0.2 mm using pulsed Nd׃YAG laser |
Dong-Gyu AHN, Gwang-Won JUNG |
157 |
Influence of tool deflection on micro channel pattern of
6׃4 brass with rectangular tool |
Tae-Jin JE, Kang-Won LEE, Sang-Cheon PARK, Jae-Gu KIM, Doo-Sun CHOI,Kyoung-Taik PARK, Kyung-Hyun WHANG |
164 |
Sub-micron-structure machining on silicon by femtosecond laser |
Hung-Yin TSAI, Shao-Wei LUO, Chih-Wei WU, Shing-Hoa WANG |
171 |
Rapid manufacturing of SiC molds with micro-sized holes using
abrasive water jet |
Bo-Sung SHIN, Kang-Su PARK, Yeon-Kyoung BAHK, Sun-Ki PARK, Jung-Han LEE,Jeung-Sang GO, Myung-Chang KANG, Cha |
178 |
Measurement of metal vapor cooling speed during nanoparticle formation by pulsed wire discharge |
Yuu SHIKODA, Yoshinori TOKOI, Koji SUWA, Satoru ISHIHARA, Tsuneo SUZUKI, Tadachika NAKAYAMA, Hisayuki SUEMATSU
| 183 |
Laser micromachining of CNT/Fe/Al2O3 nanocomposites |
Kwang-Ryul KIM, Byoung-Deog CHOI, Jun-Sin YI, Sung-Hak CHO, Yong-Ho CHOA, Dong-Soo SHIN, Dong-Ho BAE, Myung- |
189 |
Characteristics of machined surface controlled by cutting tools and
conditions in machining of brittle material |
Yong-Woo KIM, Soo-Chang CHOI, Jeung-Woo PARK, Deug-Woo LEE |
194 |
Structural stability estimation of whirling unit |
Son-Jae HWAN, Han-Chang WOO, Lee-Sang RYONG, Lee-Young MOON |
202 |
Cutting force signal pattern recognition using hybrid neural network
in end milling |
Song-Tae SEONG, Ko-Tae JO, Young-Moon LEE |
209 |
Optimization of image capturing method of wear particles for
condition diagnosis of machine parts |
Yon-Sang CHO, Heung-Sik PARK |
215 |
Analysis and optimization of nitrile butadiene rubber
sealing mechanism of ball valve |
Xue-Guan SONG, Lin WANG, Young-Chul PARK |
220 |
Ultrasonic vibrating system design and tool analysis |
Kei-Lin KUO |
225 |
Effective tool design of three-rank form as
precision removal-process of ITO thin-films |
Pai-shan PA |
232 |
Dynamic simulation of universal spacer in Dynesys dynamic stabilization system for human vertebra |
Sung-Min KIM, In-Chul YANG, Seung-Yeol LEE, Sung-Youn CHO |
238 |
Easy calibration method of vision system for in-situ measurement of
strain of thin films |
Jun-Hyub PARK, Dong-Joong KANG, Myung-Soo SHIN, Sung-Jo LIM,Son-Cheol YU, Kwang-Soo LEE, Jong-Eun HA, Sung-H |
243 |
Uniform surface polished method of complex holes in
abrasive flow machining |
A-Cheng WANG, Lung TSAI, Kuo-Zoo LIANG, Chun-Ho LIU, Shi-Hong WENG |
250 |
Structural optimization for ball valve made of CF8M stainless steel |
Xue-Guan SONG, Seung-Gyu KIM, Seok-Heum BAEK, Young-Chul PARK |
258 |
Voltage-induced material removal mechanism of copper for electrochemical-mechanical polishing applications |
Sang-Jun HAN, Yong-Jin SEO |
262 |
Development of single-action, two-step clinching system using
finite element analysis |
Seong-Wook LEE, Tae-Hyung KIM, Geun-Jo HAN |
266 |
Stud welding for fixation of cryogenic insulation of
membrane tanks in LNG ship building |
Jeong-Soo LEE, Young-Soo RYU, Nam-In KIM, Bong-Joon KIM, Yoo-Kyung KIM, Myung-Hyun KIM |
271 |
Crushing behavior of lightmass structural member |
Kil-Sung LEE, Yong-June YANG, Woo-Chae HWANG, In-Young YANG |
276 |
Attaching single carbon nanotube on tip’s apex
using dielectrophoresis of DC-pulse voltage |
Hee-Jin JEONG, Yoong-Ho JUNG, Deug-Woo LEE |
280 |
Application of direct laser metal tooling for AISI H13 tool steel |
Jae-Ho LEE, Jeong-Hwan JANG, Byeong-Don JOO, Hong-Sup YIM, Young-Hoon MOON |
284 |
Machining characteristics of complex prism pattern on
electroplated roll by copper |
Tae-Jin JE, Sang-Cheon PARK, Kang-Won LEE, Yeong-Eun YOO, Doo-Sun CHOI, Kyung-Hyun WHANG, Myung-Chang KANG |
288 |
Characteristics of damaged layer in micro-machining of copper material |
Dong-Hee KWON, Jeong-Suk KIM, Myung-Chang KANG, Se-Hun KWON, Jong-Hwan LEE |
295 |
Nano-precision combined process of electrolytic in-process dressing grinding and magnetic assisted polishing on optics glass material |
Tae-Soo KWAK, Yong-Chul LEE, Gyung-Nyun KIM, Dae-Bong CHOI,Mikio YAMANOI, Hitoshi OHMORI |
301 |