| Diffusion bonding of Al alloy to Al2O3 ceramic |
FENG Ji-cai(冯吉才), WANG Da-yong(王大勇), LI Zhuo-ran(李卓然), LIU Hui-jie(刘会杰) |
1 |
| Determination of elastoplastic properties of individual phase in solidified Al brazed joint |
QIAN Yi-yu (钱乙余), GAO Feng(高峰), Dusan P. Sekulic, MA Xin(马鑫), F. Yoshida |
5 |
Diffusion behavior of silicon at interface of
Al clad sheet and joint formation |
Dusan P. Sekulic,GAO Feng(高峰), QIAN Yi-yu (钱乙余), ZHAO Hui(赵惠) |
9 |
| Friction stir welding of AA5083 aluminum alloy |
LIU Hui-jie(刘会杰), H. Fujii (藤井英俊),M. Maeda(前田将克), K. Nogi(野城清) |
14 |
Effect of YF3 on weld microstructure and performance of titanium
alloy TC4 in TIG welding |
YANG Chun-li(杨春利), LIN San-bao(林三宝), ZHANG Qing-tao(张清涛) |
18 |
| Interface structure and shear strength of brazed joints of TiAl-based alloy to middle-carbon steel |
FENG Ji-cai(冯吉才), LIU Hui-jie(刘会杰) |
22 |
| Laser beam welding of TA2 titanium sheet |
CHEN Yan-bin(陈彦宾), LI Li-qun(李俐群), ZHOU Shan-bao(周善宝), LEI Zheng-long(雷正龙) |
26 |
| Microstructure and composition characteristics of transition zone in diffusion bonding of Fe3Al intermetallics to Q235 low carbon steel |
WU Hui-qiang(吴会强), FENG Ji-cai(冯吉才), LI Ya-jiang(李亚江), WANG Juan(王娟) |
30 |
| Optimization design of electromagnetism induction heating technical parameters in high frequency induction brazing |
HE PENG(何鹏), FENG Ji-cai(冯吉才), LIU Hui-jie(刘会杰),HAN Jie-cai(韩杰才), LIU Le-chang(刘乐昌) |
34 |
| Vacuum brazing of TiB2 cermet to TiAl-based alloys using Ag-Cu-Zn filler metal |
LI Zhuo-ran(李卓然), FENG Ji-cai(冯吉才), CAO Jian（曹健） |
39 |
Scratching brazing of SiC fibre reinforced
aluminum matrix composite |
ZHANG Li-xia(张丽霞), FENG Ji-cai(冯吉才), LI Zhuo-ran(李卓然), LIU Hui-jie(刘会杰), SUN Hua-yin(孙华银) |
42 |
| New technology for brazing aluminum clustered tube of refrigerator |
HE Peng(何鹏), FENG Ji-cai(冯吉才), YU Ze-xing(余泽兴), JIA Jin-guo(贾进国), MAI Han-hui(麦汉辉) |
45 |
| Reaction kinetics of hydrogen absorption for Mg-based hydrogen-storage materials |
WANG Er-de(王尔德), ZHANG Wen-cong(张文从),YU Zhen-xing(于振兴), FANG Wen-bin(房文斌), SUN Zhi-jie(孙志杰) |
50 |
| Phase transformation rate in hydrogen absorption of magnesium-based materials |
ZHANG Wen-cong(张文从), FANG Wen-bin(房文斌), YU Zhen-xing(于振兴), ZHAO Guo-liang(赵国亮), WANG Er-de(王尔德), SUN Zhi-jie(孙志杰)< |
54 |
| Crystallization of high stable Zr55Al10Ni5Cu30bulk amorphous alloy |
SHEN Jun (沈军), SUN Jian-fei (孙剑飞), GAO Yu-lai (高玉来), WANG Gang (王刚), XING Da-wei (邢大伟), CHEN De-Min (陈德民), ZHOU Bi-de (周彼德) |
59 |
| Effect of Sn addition on thermal stability of (Zr52.5Ti5Al10Ni14.6Cu17.9)(100-x)Snx alloys |
SUN Jian-fei(孙剑飞), SHEN Jun(沈军), GAO Yui-lai(高玉来),ZHU Zhen-ye(朱振业), XING Da-wei(邢大伟), WANG Gang(王刚),CHEN De-min（陈德民） |
64 |
Effect of Ti addition on supercooled liquid region and glass forming ability of
bulk amorphous Zr60Cu20Ni10-xAl10Tix alloys |
XING Da-wei（邢大伟）, SUN Jian-fei（孙剑飞）,LIU Yu-qiang(刘玉强),WANG Gang（王刚）, YAN Ming（严明）, SHEN Jun（沈军） |
68 |
| Effect of temperature on high temperature plasticity of 95W-5(Ni/Fe/Co) alloy |
WANG Er-de(王尔德), FANG Wen-bin(房文斌), HU Lian-xi(胡连喜), YU Yang(于洋) |
71 |
Microstructure and mechanical properties of high density tungsten alloy and
its influence factors |
FANG Wen-bin(房文斌）, WANG Er-de(王尔德), HU Lian-xi(胡连喜), YU Yang（于洋）, CHEN She-wei(陈社伟) |
75 |
| Preparation of nanoscale Li2O-Al2O3-SiO2glass-ceramic by polyacrylamide gel method |
WU Song-quan(吴松全), HE Li-na(何利娜), WANG Fu-ping(王福平), LEI Ting-quan（雷廷权） |
80 |
| TiC phase in Ti alloys at different temperatures |
FANG Wen-bin(房文斌), WEI Zun-jie(魏尊杰),WANG Hong-wei(王宏伟), ZENG Song-yan(曾松岩) |
84 |
| Granulation of primary dendritic TiC in TiC/Ti composite |
JIN Yun-xue (金云学), ZENG Song-yan (曾松岩), ZHANG Cheng-jun (张成军) |
89 |
| Semi-solid microstructure and its evolution of LC9 aluminum alloys prepared with directly heating-isothermal treatment method |
WANG Wei-wei(王卫卫), SONG Jian-li(宋建丽), HAN Fei(韩飞) |
94 |
Nucleation mechanism for grain refinement
in A357 alloy by Al-Ti-B master alloys |
ZHU Zhao-jun(朱兆军), ZENG Song-yan(曾松岩), GUO Li-wei(郭立伟), WANG Hong-wei(王宏伟) |
98 |
Counter-pressure casting control system for
large thin-wall aluminum alloy components |
MA Xu-liang(马旭梁), ZHU Zhao-jun(朱兆军), FANG Wen-bin(房文斌), ZENG Song-yan(曾松岩) |
102 |
Squeeze casting technique for fabricating SiCp/Al composites with lower volume
fractions of SiC particles |
QU Shou-jiang (曲寿江), CAO Guo-jian (曹国剑), GENG Lin (耿林), LEI Ting-quan (雷廷权) |
106 |
Technology of centrifugal casting for
titanium alloy |
TIAN Jing(田竞), XIAO Shu-long(肖树龙),CHEN Yu-yong(陈玉勇), CHEN Zi-yong(陈子勇) |
111 |
Temperature field numerical simulation of
induction skull melting process |
CHEN Zi-yong(陈子勇), SHU Qun(舒群), XU Li-juan(徐丽娟),TIAN Jing(田竞), CHEN Yu-yong(陈玉勇) |
115 |
Thermodynamic parameter calculation and evaporation behavior of
elements in Ti-Al-V alloys |
CHEN Zi-yong(陈子勇), XU Li-juan(徐丽娟), SHU Qun(舒群),KONG Fan-tao（孔凡涛), CHEN Yu-yong(陈玉勇) |
119 |
| Microstructure evolution in cast Ti-37Al alloys with B additions |
GAO Wen-li(高文理), ZHANG Hu(张虎),ZHANG Er-lin (张二林),ZENG Shong-yan (曾松岩) |
124 |
| Effects of heat treatment on dual phase structure carbides in Ti-34Al matrix composite |
WANG Hong-wei(王宏伟), FANG Wen-bin(房文斌), WEI Zun-jie(魏尊杰), ZENG Song-yan(曾松岩) |
128 |
| Grain and lamellar refinement in TiAl based alloy by yttrium addition |
KONG Fan-tao(孔凡涛), CHEN Zi-yong(陈子勇), TIAN Jing(田竞) , CHEN Yu-yong(陈玉勇) |
133 |
| Deformation behavior of sheet metals and viscous medium in viscous pressure bulging process with back viscous pressure |
WANG Zhong-jin(王忠金), LIU Jian-guang(刘建光), WANG Zhong-ren(王仲仁), LV Jun (吕军) |
136 |
| Molecular dynamics simulation of bending crack initiation and growth of single crystal aluminium |
SHAN De-bin(单德彬), YUAN Lin(袁,林), GUO Bin(郭斌) |
140 |
| Hydraulics numerical simulation on filter purification of molten metal |
GENG Yao-hong(耿耀宏), FANG Wen-bin(房文斌),YANG Yi-tao(杨弋涛),YE Rong-mao(叶荣茂),AN Ge-ying(安阁英) |
144 |
| High temperature compression behavior of Al2O3 particle reinforced 6061aluminum alloy composite |
LUAN Bo-feng((栾伯峰), WU Gao-hui(武高辉), SUN Dong-li(孙东立) |
148 |
| Numerical simulation of wrinkling in hydroforming of aluminum alloy tubes |
YUAN Shi-jian(苑世剑), LIU Gang(刘钢), LANG Li-hui(郎利辉) |
152 |
Effect of properties of sheet metal on
shear stress wrinkling |
CUI Ling-jiang(崔令江), ZHANG Wen-cong(张文从) |
157 |
| Laser forming thin aluminum sheets |
LI Li-qun(李俐群), CHEN Yan-bin（陈彦宾）, LIN Shang-yang(林尚扬) |
161 |
| Magnetic pressure in electromagnetic aluminum tube-compression forming |
YU Hai-ping(于海平), LI Chun-feng(李春峰), ZHAO Zhi-heng(赵志衡),LI Zhong(李忠), JIANG Hong-wei(江宏伟) |
165 |
Microstructure of hot-pack rolled
Ti-43Al-9V-0.3Y alloy |
CHEN Yu-yong(陈玉勇), KONG Fan-tao(孔凡涛), CHEN Zi-yong(陈子勇), TIAN Jing(田竞) |
170 |
| Variation of mechanical properties and microstructures of Al-Pb mixed powder during mechanical milling |
HE Wen-xiong(贺文雄), FANG Wen-bin(房文斌), WANG Er-de(王尔德), HAN Fei(韩飞) |
174 |
| Extrusion process of lead-clad glass fiber composites |
SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌),HAN Fei(韩飞),HE Wen-xiong(贺文雄),WANG Er-de(王尔德) |
179 |
| Properties of lead-clad glass fiber composites |
SUN Hong-fei(孙宏飞）, FANG Wen-bin（房文斌）,HAN Fei（韩飞）,XING Cheng-bo（刑成波）,HE Wen-xiong（贺文雄）,WANG Er-de（王尔德） |
183 |
| Cup-drawing process of BT20 titanium alloy |
CHEN Yu(陈宇), KANG Da-chang(康达昌), XU Yong-chao(徐永超) |
187 |
Microforming of superplastic
2091Al-Li alloy |
WANG Chang-li(王长丽), ZHANG Kai-feng(张凯锋), DING Shui(丁水) |
191 |
| Superplasticity in magnesium-based composite |
ZHAO Min（赵敏）, WU Kun（吴昆）, YAN Feng（严峰）, YANG De-zhuang（杨德庄） |
195 |
| Effect of rare earth on kinetics of pulse plasma nitriding of pure aluminum and properties of nitrided layer |
YAN Mu-fu(闫牧夫) |
198 |
Effect of gas pressure on residual stresses
in AlN films deposited on Al substrates |
TIAN Jing(田竞), XUE Xiang(薛祥), Takao Hanabusa, Kazaya Kusaka |
202 |
Influence of sintering on physical properties of high-carbon copper matrix
pantograph slider sinters |
GUO Bin（郭斌）, JIN Yong-ping（金永平）, WANG Er-de（王尔德）, SHAN De-bin（单德彬） |
206 |
| Tribological properties of Ti-Al-N films prepared by plasma-based ion implantation mixing |
SUN Yue (孙跃), TANG Guang-ze(唐光泽), MA Xin-xin(马欣新) |
213 |
| Oxidation behavior of Ti2AlC/TiAl composites |
WEI Zun-jie(魏尊杰), WANG Hong-wei(王宏伟), FANG Wen-bin(房文斌), ZENG Song-yan(曾松岩) |
218 |
