| MATERIALS SCIENCE AND ENGINEERING |
| Solidification of Al alloys under electromagnetic field |
CUI Jian-zhong(崔建忠) |
473 |
| Strengthening-toughening of 7xxx series high strength aluminum alloys by heat treatment |
CHEN Kang-hua（陈康华), HUANG Lan-ping（黄兰萍） |
484 |
| Textures in high purity aluminum foils and AA3004 sheets |
XIAO Ya-qing(肖亚庆), ZHANG Xin-ming(张新明), TANG Jian-guo(唐建国), DENG Yun-lai(邓运来), CHEN Zhi-yong(陈志永) |
491 |
| Mechanism of strengthening of cube texture for high purity aluminum foils by additional-annealing |
ZHANG Xin-ming(张新明), LIU Sheng-dan(刘胜胆), TANG Jian-guo(唐建国), ZHOU Zhuo-ping(周卓平) |
499 |
Influence of initial textures on dynamic recrystallization and textures in AZ31
magnesium alloys |
YANG Ping(杨平), CUI Feng-e（崔凤娥),MA Shi-cai(马世才), G Gottstein |
504 |
| Development on research of advanced rare-earth aluminum alloy |
NIE Zuo-ren(聂祚仁), JIN Tou-nan(金头男), ZOU Jing-xia(邹景霞),FU Jing-bo(付静波), YANG Jun-jun(杨军军), ZUO Tie-yong (左铁镛) |
509 |
| Microstructures and mechanical properties of Al-Mg and Al-Zn-Mg based alloys containing minor scandium and zirconium |
YIN Zhi-min(尹志民), JIANG Feng(姜锋), PAN Qing-lin(潘青林), GUO Fei-yue(郭飞跃), ZHU Da-peng(朱大鹏), SONG Lian-peng(宋练鹏), ZEN Yu(曾渝), WANG Tao(王涛) |
515 |
| Purification of scrap aluminum foil and aluminum melt covering and protecting & atomic purification theory |
NI Hong-jun(倪红军), SUN Bao-de(孙宝德), LIU Man-ping(刘满平), DING Wen-jiang(丁文江) |
521 |
| Removal of inclusions from molten aluminum with actively coated ceramic filters |
ZHOU Ming(周鸣), NI Hong-Jun(倪红军), SHU Da(疏达), ZHANG Wei-Yu(张为玉), LI Ke(李克), SUN Bao-De(孙宝德), WANG Jun(王俊) |
527 |
| Research and development of transnormal twin roll-casting technology |
HUANG Ming-hui(黄明辉), LI Xiao-qian（李晓谦）,MAO Da-heng（毛大恒）, DENG Gui-ling（邓圭玲）,HU Shi-cheng（胡仕成）, LI Xin-he（李新和）,ZHAN Li-hua（湛利华） |
532 |
| Influence of La on microstructures of hypereutectic Al-Si alloys |
ZHANG Di(张荻), YI Hong-kun（易宏坤）, Lü Wei-jie（吕维洁）, FAN Tong-xiang（范同祥） |
541 |
| Phase relations of Al-4Mg-Sc-Zr quaternary system in Al-rich range at 430℃ |
XIA Chang-qing(夏长清), ZENG Fan-hao(曾凡浩), GU Yi(古一) |
546 |
Mechanical properties of hot rolled
2519 aluminum alloy plate |
PENG Da-shu(彭大暑), CHEN Xian-feng(陈险峰), LIN Qi-quan(林启权), ZHANG Hui(张辉) |
553 |
| Effect of processing parameters on microstructures and mechanical properties of rapidly solidified AlFeVSi hot-extruded product |
XIAO Yu-de(肖于德), LI Wen-xian（黎文献）, TAN Dun-qiang（谭敦强）,MA Zheng-qing（马正青）, WANG Ri-chu（王日初） |
558 |
| Effect of processing parameters on microstructures and mechanical properties of rapidly solidified AlFeVSi hot-extruded product |
XIAO Yu-de(肖于德), LI Wen-xian（黎文献）, TAN Dun-qiang（谭敦强）,MA Zheng-qing（马正青）, WANG Ri-chu（王日初） |
558 |
| Phase transition of Al-Fe-V-Si heat-resistant alloy by spray deposition |
TAN Dun-qiang(谭敦强), LI Wen-xian(黎文献), XIAO Yu-de(肖于德), WANG Ri-chu(王日初), MA Zheng-qing(马正青), XIONG Bai-qing(熊柏清) |
568 |
| Textures variation of 3104 aluminum alloy sheetsunder different rolling conditions |
HU Zhuo-chao(胡卓超), LIU Yang-dong(刘沿东), ZHANG De-fen(张德芬), ZUO Liang(左良), WANG Fu(王福) |
574 |
Waveguide mechanism and design of
thermal contact resistance at
metal rheologic interface |
HU Shi-cheng(胡仕成), HUANG Ming-hui（黄明辉）, LI Xiao-qian（李晓谦）, ZHONG Jue（钟掘） |
579 |
Effect of high-temperature pre-precipitation on mechanical properties and
stress corrosion cracking of Al-Zn-Mg alloys |
LI Song(李松), CHEN Kang-hua(陈康华), |
585 |
| Microstructure and properties of 2618-Ti heat resistant aluminum alloy |
WANG Jian-hua(王建华), YI Dan-qing(易丹青), WANG Bin(王斌) |
590 |
| Controlled crystallization of hydroxyapatite under hexadecylamine self-assembled monolayer |
HUANG Su-ping(黄苏萍), ZHOU Ke-chao(周科朝), LIU Yong(刘咏), HUANG Bai-yun(黄伯云) |
595 |
| Preparation of tetragonal CaO-ZrO2 nano-powder by chemical coprecipitation method |
LIU Jian-ben(刘建本), RUAN Jian-ming(阮建明), ZOU Jian-peng(邹俭鹏),LI Ya-jun(李亚军), LUO Feng(骆锋) |
600 |
| Thermal stability of Zr55Al10Ni5Cu30 bulk amorphous alloy during continuous heating and isothermal annealing |
GAO Yu-lai(高玉来), SHEN Jun(沈军), SUN Jian-fei(孙剑飞),WANG Gang(王刚), XING Da-wei(邢大伟), ZHOU Bi-de(周彼德) |
605 |
| Fabrication of composite wire of lead coated on glass fiber by extrusion |
SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌), HAN Fei(韩飞), HE Wen-xiong(贺文雄), HU Lian-xi(胡连喜), WANG Er-de(王尔德) |
609 |
Wavelets analysis of electrochemical noise generated during corrosion processes of
pure Al in NaCl solution |
GAO Yun-fang(高云芳), ZHANG Zhao(张昭), LI Jin-feng(李劲风), CAO Fa-he(曹发和), CHENG Ying-liang(程英亮), ZHANG Jian-qing(张鉴清 |
613 |
Corrosion of LY12 aluminum alloy in
sodium chloride solution |
CHENG Ying-liang(程英亮), ZHANG Zhao(张昭), CAO Fa-he(曹发和), LI Jing-feng(李劲风), ZHANG Jian-qing(张鉴清), WANG Jian-ming(王 |
617 |
| Numerical simulation and experimental study on cavity growth in uniaxial tension of superplastic magnesium alloy |
YU Yan-dong(于彦东), ZHANG Kai-feng(张凯锋), ZHENG Hai-rong(郑海荣), JIANG Da-ming(蒋大鸣) |
622 |
Effect of Sn on as-cast ageing behavior
of Al-Si-Mg alloy |
WANG Gui-qing(王桂青), BIAN Xiu-fang(边秀房),DUAN You-feng(段佑峰), ZHANG Jun-yan(张均艳) |
626 |
Forgeability of AZ31B magnesium
alloy in warm forging |
ZHANG Xian-hong(张先宏), RUAN Xue-yu(阮雪榆), K. Osakada |
632 |
| Characterization of Al-12Si alloy and its composites in dry sliding friction and wear at elevated temperature |
DU Jun(杜军), LIU Yao-hui（刘耀辉), YU Si-rong(于思荣), WANG Wei(王威) |
636 |
Residual stress in quenched 7075
aluminum alloy thick plates |
LIN Gao-yong (林高用), ZHANG Hui(张辉), ZHU Wei(朱伟), PENG Da-shu(彭大暑), LIANG Xuan(梁轩), ZHOU Hong-zhang(周鸿章)
| 641 |
|
| Limit of structure refinement for 7075 aluminum alloy at elevated temperature by hot deformation |
ZHANG Xiao-ming(张小明), ZHANG Ting-jie(张廷杰), MA Guang-lai(马光来), TIAN Feng(田锋),LI Zhong-kui(李中奎), ZHOU Lian(周廉) |
645 |
| MINERAL PROCESSING, METALLURGY,CHEMISTRY AND MININ |
Decomposition of supersaturated
sodium aluminate solution |
CHEN Qi-yuan(陈启元), LI Jie(李洁), YIN Zhou-lan(尹周澜), ZHANG Ping-min(张平民) |
649 |
| Progress in flotation de-silica |
HU Yue-hua(胡岳华) |
656 |
| Preparation and preliminary testing of cermet inert anode for aluminum electrolysis |
LI Jie(李劼), LAI Yan-qing(赖延清), ZHOU Ke-chao(周科朝),LI Zhi-you(李志友), LIU Ye-xiang(刘业翔) |
663 |
| Intensifying digestion of diaspore and separation of alumina and silica |
LI Xiao-bin(李小斌), PENG Zhi-hong(彭志宏),LIU Gui-hua(刘桂华), ZHOU Qiu-sheng(周秋生) |
671 |
| Flotation of kaolinite and its interaction with hexadecylammonium bromide |
QIN Wen-qing(覃文庆), QIU Guan-zhou(邱冠周), HU Yue-hua(胡岳华) |
679 |
Basicity for blast furnace-type slag
containing B2O3 and high MgO |
HUANG Zhen-qi(黄振奇), CAI Ya-min(蔡亚旻), ZHU Wen-fei(朱文非), YANG Zu-pan(杨祖磐) |
683 |
| Industrial testing of property-modified prebaked carbon anode for aluminum electrolysis |
XIAO Jin(肖劲), DING Feng-qi(丁凤其), LI Jie(李劼),ZOU Zhong(邹忠), HU Guo-rong(胡国荣), LIU Ye-xiang(刘业翔) |
686 |
| Preparation of solid polyferric sulfate from pyrite cinders and its structure feature |
ZHENG Ya-jie(郑雅杰), GONG Zhu-qing(龚竹青), CHEN bai-zhen(陈白珍), LIU Li-hua(刘立华) |
690 |
Dynamics of anodic process of gold electrode
in thiourea solution in the presence of sulfur dioxide |
LONG Huai-zhong（龙怀中）, SHU Wan-yin（舒万艮） |
695 |
Determination of ohmic/voltage drop and factors influencing anodic overvoltage of carbon anodes
in Na3AlF6-Al2O3 based melts |
LI Qing-yu(李庆余), LI Jie(李劼), TIAN Zhong-liang(田忠良), ZHANG Gang(张刚) |
699 |
| Ambient temperature cured TiB2 cathode coating for aluminum electrolysis |
LAI Yan-qing(赖延清), LI Qing-yu(李庆余), YANG Jian-hong(杨建红), LI Jie(李劼) |
704 |
SEM observation of gibbsite precipitation with seeds from sodium aluminate
solutions promoted by ultrasound |
CHEN Guo-hui(陈国辉), CHEN Qi-yuan(陈启元),YIN Zhou-lan(尹周澜), ZHANG Ping-min(张平民) |
708 |
Aluminum-silicates flotation with
quaternary ammonium salts |
WANG Yu-hua(王毓华), HU Yue-hua(胡岳华), CHEN Xiang-qing(陈湘清) |
715 |
| Separating iterative solution model of generalized nonlinear dynamic least squares for data processing in building of digital earth |
TAO Hua-xue(陶华学), GUO Jin-yun(郭金运) |
720 |
| Minimum norm method of analyzing ill-conditioned state of design matrix in estimation of parameters |
LU Xiu-shan(卢秀山),OU Ji-kun(欧吉坤), SONG Shu-li(宋淑丽),FENG Zun-de(冯尊德) |
724 |
| Information characteristics of discrete K-L transform based on information entropy |
DING Shi-fei(丁世飞), JIN Feng-xiang(靳奉祥) |
729 |
| Solution model of nonlinear integral adjustment including different kinds of observing data with different precisions |
GUO Jin-yun (郭金运), TAO Hua-xue (陶华学) |
735 |
| Edge detection of remote sensing image based on nonlinear intensity of curved surface |
ZHANG Lian-peng(张连蓬), LIU Guo-lin(刘国林), JIANG Tao(江涛) |
739 |
