Structural Materials |
Phase equilibria in Mg-rich corner of Mg-Ca-RE (RE=Gd, Nd) systems at 400 °C |
Hou-jun FEI, Guang-long XU, Li-bin LIU, Hong BO, Li-jun ZENG, Cui-ping CHEN |
881 |
Microstructure and phase composition of as-cast Mg-9Er-6Y-xZn-0.6Zr alloys |
Jing-feng WANG, Peng-fei SONG, Fu-sheng PAN, Xiao-en ZHOU |
889 |
Microstructure, mechanical properties and creep resistance of Mg-(8%-12%)Zn-(2%-6%)Al alloys |
Xiao-feng WAN, Hong-jun NI, Ming-yu HUANG, Hua-li ZHANG, Jian-hua SUN |
896 |
Effects of Sn on microstructure of as-cast and as-extruded Mg-9Li alloys |
Bin JIANG, Ying ZENG, Ming-xing ZHANG, Heng-mei YIN, Qing-shan YANG, Fu-sheng PAN |
904 |
Application of cyclic upsetting-extrusion to semi-solid processing of AZ91D magnesium alloy |
Jian-quan TAO, Ju-fu JIANG, Hong CHEN, Yuan-lun XIAO, Rong-chao ZHANG,Qing-hua HU, Jun ZHAO, Qiang ZHAO
| 909 |
Influence of strain rate on microstructure and formability of AZ31B magnesium alloy sheets |
Li-fei WANG, Guang-sheng Huang, Hong-cheng LI, Hua ZHANG |
916 |
Effects of temperature on fracture behavior of Al-based in-situ composites reinforced with Mg2Si and Si particles fabricated by centrifugal casting |
Bo LI, Kai WANG, Ming-xiang LIU, Han-song XUE, Zi-zong ZHU, Chang-ming LIU |
923 |
Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution |
Biljana BOBIC, Jelena BAJAT, Zagorka ACIMOVIC-PAVLOVIC, Ilija BOBIC, Bore JEGDIC |
931 |
Multi-objective optimization of friction stir welding parameters using desirability approach to join Al/SiCp metal matrix composites |
P. PERIYASAMY, B. MOHAN, V. BALASUBRAMANIAN, S. RAJAKUMAR, S. VENUGOPAL |
942 |
Effect of initial microstructure on hot workability of 7085 aluminum alloy |
Song-yi CHEN, Kang-hua CHEN, Guo-sheng PENG, Le JIA |
956 |
Formability of AA5052/polyethylene/AA5052 sandwich sheets |
Jian-guang LIU, Wei XUE |
964 |
Microstructures and properties of Al-45%Si alloy prepared by liquid-solid separation process and spray deposition |
Yan-xia LI, Jun-you LIU, Wen-shao WANG, Guo-quan LIU |
970 |
Influence of technical parameters on strength and ductility of AlSi9Cu3 alloys in squeeze casting |
Shi-bo BIN, Shu-ming XING, long-mei TIAN, Ning ZHAO, Lan LI |
977 |
Microstructure and room temperature mechanical properties of NiAl-Cr(Mo)-(Hf, Dy) hypoeutectic alloy prepared by injection casting |
Li-yuan SHENG, Fang YANG, Ting-fei XI, Yu-feng ZHENG, Jian-ting GUO |
983 |
Formation condition of solid solution type high-entropy alloy |
Ming-xing REN, Bang-sheng LI, Heng-zhi FU |
991 |
Functional Materials |
In vitro corrosion and biocompatibility of phosphating modified WE43 magnesium alloy |
Cheng-hong YE, Ting-fei XI, Yu-feng ZHENG, Shu-qin WANG, Yang-de LI |
996 |
Cavitation and electrochemical characteristics of thermal spray coating with sealing material |
Seong-Jong KIM, Seung-Jun LEE, In-Ju KIM, Seong-KweonKIM, Min-Su HAN, Seok-Ki JANG |
1002 |
Reactive HVOF sprayed TiN-matrix composite coating and its corrosion and wear resistance properties |
Jing MA, Dong-qing YAN, Jian-wen HU, Xin ZHANG, Yang LI |
1011 |
Photocatalytic activity and kinetics for acid yellow degradation over surface composites of TiO2-coated activated carbon under different photocatalytic conditions |
Meng-xiong ZENG, You-ji LI, Ming-yuan MA, Wei CHEN, Lei-yong LI |
1019 |
Preparation and electrochemical performance of 2LiFe1-xCoxPO4-Li3V2(PO4)3/C cathode material for lithium-ion batteries |
Jia-feng ZHANG, Bao ZHANG, Xue-yi GUO, Xing OU, Jian-long WANG,Chun-li PENG, Jun-chao ZHENG, He-zhang CHEN, Chao SHEN |
1028 |
Preparation and electrochemical performance of nano-scale Ni(OH)2 doped with zinc |
Li ZHAO, Zhi-hao LIU, Lei JIN |
1033 |
Effect of pretreatment on electrochemical etching behavior of Al foil in HCl-H2SO4 |
Chao-lei BAN, Ye-dong HE, Xin SHAO, Juan DU |
1039 |
Fractal dimension for porous metal materials of FeCrAl fiber |
Jian-zhong WANG, Zheng-ping XI, Hui-ping TANG, Wei-dong HUANG, Ji-lei ZHU, Qing-bo AO |
1046 |
Computational Materials Science and Numerical Modelling |
Simulation study on non-linear effects of initial melt temperatures on microstructures during solidification process of liquid Mg7Zn3 alloy |
Rang-su LIU, Yong-chao LIANG, Hai-rong LIU, Nai-chao ZHENG, Yun-fei MOZhao-yang HOU, Li-li ZHOU, Ping PENG |
1052 |
Springback prediction for incremental sheet forming based on FEM-PSONN technology |
Fei HAN, Jian-hua MO, Hong-wei QI, Rui-fen LONG, Xiao-hui CUI, Zhong-wei LI |
1061 |
Fracture strength evaluation of titanium alloys using modified average stress criterion |
H. BRIGHTON ISAAC JOHN, T. CHRISTOPHER |
1072 |
Strain rate sensitivity of closed cell aluminium fly ash foam |
Manmohan DASS GOEL, Vasant A. MATSAGAR,Anil K. GUPTA, Steffen MARBURG |
1080 |
Theoretical prediction of effective elastic constants for new intermetallic compound porous material |
Shu-lan SU, Qiu-hua RAO, Yue-hui HE |
1090 |
Effect of die inlet geometry on extrusion of clover sections through curved dies: Upper bound analysis and experimental verification |
Tahir ALTINBALIK, Onder AYER |
1098 |
Continuous extrusion and rolling forming velocity of copper strip |
Xin-bing YUN, Wei YOU, Ying ZHAO, Bing LI, Zhi-xin FAN |
1108 |
Thermal modeling of underwater friction stir welding of high strength aluminum alloy |
Hui-jie ZHANG, Hui-jie LIU, Lei YU |
1114 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Mechanisms of surface charge development of serpentine mineral |
Bo FENG, Yi-ping LU, Qi-ming FENG, Peng DING, Na LUO |
1123 |
Mechano-chemical sulfidization of zinc oxide by grinding with sulfur and reductive additives |
Li-yuan CHAI, Yan-jie LIANG, Yong KE, Xiao-bo MIN, Chong-jian TANG,Hai-jing ZHANG, Xian-de XIE, Cui-yu YUAN< |
1129 |
Precursor solution prepared by evaporation deamination complex method for solvent separation of Mo and W by H2O2-complexation |
Wen-juan GUAN, Gui-qing ZHANG, Cong-jie GAO |
1139 |
Adsorption and reduction of platinum(IV) chloride complex ions on activated carbon |
Marek WOJNICKI, Krzysztof PACLAWSKI, Robert P. SOCHA, Krzysztof FITZNER |
1147 |
Electrochemical behavior of Li+, Mg2+, Na+ and K+ in LiFePO4/ FePO4 structures |
Zhong-wei ZHAO, Xiu-fen SI, Xin-xing LIANG, Xu-heng LIU, Li-hua HE |
1157 |
Fe extraction from high-silicon and aluminum cyanide tailings by pretreatment of water leaching before magnetic separation |
Ya-li ZHANG, Huai-mei LI, Xian-jin YU |
1165 |
Preparation of Ti-rich material from titanium slag by activation roasting followed by acid leaching |
Shui-shi LIU, Yu-feng GUO, Guan-zhou QIU, Tao JIANG, feng CHEN |
1174 |
Thermodynamics of leaching roasted jarosite residue from zinc hydrometallurgy in NH4Cl system |
Shao-hua JU, Li-bo ZHANG, Jin-hui PENG, Zhe SHI,Sheng-hui GUO, Bin-guo LIU, Ya-jian WANG |
1179 |
Hydrothermal synthesis of titanium-supported nanoporous palladium-copper electrocatalysts for formic acid oxidation and oxygen reduction reaction |
Qing-feng YI, Xing-zhong XIAO, Yun-qing LIU |
1184 |
Electrosynthesis and physicochemical properties of α-PbO2-CeO2-TiO2 composite electrodes |
Bu-ming CHEN, Zhong-cheng GUO, Rui-dong XU |
1191 |
Effects of magnesium chloride-based multicomponent salts on atmospheric corrosion of aluminum alloy 2024 |
Bin-bin WANG, Zhen-yao WANG, Wei HAN, Chuan WANG, Wei KE |
1199 |