| Structural Materials |
| Characteristics evolution of 6009/7050 bimetal slab prepared by direct-chill casting process |
Guang-yuan YAN, Feng MAO, Fei CHEN, Wei WU, Zhi-qiang CAO, Tong-min WANG, Ting-ju LI |
895 |
| Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties |
N. RADHIKA, R. RAGHU |
905 |
| Wearing resistance of in-situ Al-based composites with different SiO2/C/Al molar ratios fabricated by reaction hot pressing |
El Oualid MOKHNACHE, Gui-song WANG, Lin GENG |
917 |
| Effects of high temperature pre-straining on natural aging and bake hardening response of Al-Mg-Si alloys |
Zhi-hong JIA, Li-peng DING, Yao-yao WENG, Zhang WEN, Qing LIU |
924 |
| Production of grain-refined AC7A Al-Mg alloy via solidification in ultrasonic field |
W. KHALIFA, Y. TSUNEKAWA |
930 |
| Effect of T7951 secondary aging treatment on crack propagation behavior of 7055 aluminum alloy |
Song ZHOU, Lei WANG, Li-yang XIE, Li HUI, Liang XU |
938 |
| Hot deformation behavior of homogenized Al-3.2Mg-0.4Er aluminum alloy |
Jian PENG, Yong-jian WANG, Li-ping ZHONG, Long-fei PENG, Fu-sheng PAN |
945 |
| Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy |
M. AMNE ELAHI, S. G. SHABESTARI |
956 |
| Strain rate-dependent high temperature compressive deformation characteristics of ultrafine-grained pure aluminum produced by ECAP |
Ying YAN, Yue QI, Li-jia CHEN, Xiao-wu LI |
966 |
| Fracture energy evaluation on 7075-T651 aluminum alloy welds determined by instrumented impact pendulum |
R. R. AMBRIZ, D. JARAMILLO, C. GARCíA, F. F. CURIEL |
974 |
| Effect of pin profile and process parameters on microstructure and mechanical properties of friction stir welded Al-Cu joints |
M. FELIX XAVIER MUTHU, V. JAYABALAN |
984 |
| Microstructure and mechanical properties of pulsed laser welded Al/steel dissimilar joint |
Jin YANG, Yu-long LI, Hua ZHANG |
994 |
| Dynamic recrystallization behavior of burn resistant titanium alloy Ti-25V-15Cr-0.2Si |
Shi-qiang LU, De-lai OUYANG, Xia CUI, Ke-lu WANG |
1003 |
| Effect of electrochemical state on corrosion-wear behaviors of TC4 alloy in artificial seawater |
Jun CHEN, Qing ZHANG |
1011 |
| Preparation of micro-nanostructure on titanium implants and its bioactivity |
Rui Zhang, Yi Wan , Xing Ai,Teng Wang, Bo Men |
1019 |
| Microstructure and mechanical properties of Fe-doped NiAl-28Cr-6Mo eutectic alloys |
A. GUNGOR, H. DEMIRTAS |
1025 |
| Hot deformation behavior of spray forming LSHR alloy using constitutive equation and processing map |
Yi XU, Jie WANG |
1032 |
| Effect of strain rate and deformation temperature on strain hardening and softening behavior of pure copper |
Shu-hai HUANG, Da-yu SHU, Chuan-kai HU, Shi-feng ZHU |
1044 |
| Computational Materials Science and Numerical Modelling |
| Thermodynamic assessment of Ni-Yb binary system |
Dai-man ZHU, Chang-rong LI, Cui-ping GUO, Zhen-min DU, Jun-qin LI |
1055 |
| Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy |
Yi-chuan SHAO, Tao TANG, Da-yong LI, Guo-wei ZHOU, Shao-rui ZHANG, Ying-hong PENG |
1063 |
| Quantitative calculation on atomic site occupation during precipitation of Ni3(Al1-xFex) by microscopic phase-field study |
Hai-hong LIAO, Min-jie LIANG, Pei-kang BAI |
1073 |
| Constitutive equations of 1060 pure aluminum based on modified double multiple nonlinear regression model |
Pan LI, Fu-guo LI, Jun CAO, Xin-kai MA, Jing-hui LI |
1079 |
| Modeling constitutive relationship of 6013 aluminum alloy during hot plane strain compression based on Kriging method |
Gang XIAO, Qin-wen YANG, Luo-xing LI |
1096 |
| Identification of constitutive model parameters for nickel aluminum bronze in machining |
Zhong-tao FU, Wen-yu YANG, Si-qi ZENG, Bu-peng GUO, Shu-bing HU |
1105 |
| Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
| Flotation of low-grade bauxite using organosilicon cationic collector and starch depressant |
Xin-yang YU, Hao-lin WANG, Qiang-qiang WANG, Bo FENG, Hong ZHONG |
1112 |
| Separation of manganese from calcium and magnesium in sulfate solutions via carbonate precipitation |
Qing-quan LIN, Guo-hua GU, Hui WANG, Chong-qing WANG, You-cai LIU, Ren-feng ZHU, Jian-gang FU |
1118 |
| Influence of sodium silicate on manganese electrodeposition in sulfate solution |
Jian-rong XUE, Hong ZHONG, Shuai WANG, Chang-xin LI, Fang-fang WU |
1126 |
| Reaction pathway and kinetics of CdO nanoparticles prepared from CdCO3 precursor using thermal decomposition method |
Gholam Reza KHAYATI, Seyed Hadi SHAHCHERAGHI, Vahid LOTFI, Esmael DAREZARESHKI |
1138 |
| In situ investigation of atmospheric corrosion behavior of PCB-ENIG under adsorbed thin electrolyte layer |
Pan YI, Kui XIAO, Kang-kang DING, Gang LI, Chao-fang DONG, Xiao-gang LI |
1146 |
| High temperature oxidation behavior of Ti(Al,Si)3 diffusion coating on γ-TiAl by cold spray |
Ji-qiang WANG, Ling-yan KONG, Tie-fan LI, Tian-ying XIONG |
1155 |
| Oxidation behavior of RE-modified nickel-based superalloy between 950 °C and 1150 °C in air |
Long-fei LIU, Shu-sen WU, Yang CHEN, Shu-lin Lü |
1163 |
| Bimodal-grained Ti fabricated by high-energy ball milling and spark plasma sintering |
Yan LONG, Wen-jing GUO, Ying LI |
1170 |
| Low frequency damping behavior associated with sintering process in Al powder compact |
Gang-ling HAO, Xian-yu LI, Wei-guo WANG |
1176 |
