Structural Materials |
Microstructural evolution of Mg, Ag andZn micro-alloyed Al-Cu-Li alloy during homogenization |
Qing LIU, Rui-hua ZHU, Jin-feng LI, Yong-lai CHEN, Xu-hu ZHANG, Long ZHANG, Zi-qiao ZHENG |
607 |
Effects of magnetic field and hot rolling on microstructures andproperties of cryoECAPed 1050 aluminum alloy during annealing |
Yi-heng CAO, Li-zi HE, Lin ZHANG, Yi-zhou ZHOU, Ping WANG, Jian-zhong CUI |
620 |
Effect of pre-annealing on microstructure evolution ofTRC AA3003 aluminum alloy subjected to ECAP |
Michaela ?lapáková POKOVá, Mariia ZIMINA, Miroslav CIESLAR |
627 |
Effect of as-solidified microstructure onsubsequent solution-treatment process for A356 Al alloy |
Bo DANG, Cong-cong LIU, Feng LIU, Ying-zhuo LIU, Yuan-bing LI |
634 |
Mechanical behavior of Al-Zn-Mg-Cu alloy under tension in semi-solid state |
Gang CHEN, Yu-min ZHANG, Zhi-ming DU |
643 |
Flow behavior and microstructure evolution of 6A82 aluminium alloy with high copper content during hot compression deformation at elevated temperatures |
Qun-ying YANG, Dong YANG, Zhi-qing ZHANG, Ling-fei CAO, Xiao-dong WU, Guang-jie HUANG, Qing LIU |
649 |
Microstructure and properties at bonding interface of AA4045/AA3003 aluminum alloy cladding billet prepared by semi-continuous casting |
Xing HAN, Bo SHAO, Ke-sheng ZUO, Lin JIANG, Hai-tao ZHANG, Li-zi HE, Ke QIN, Jian-zhong CUI |
658 |
Dry sliding wear behavior of rheocast hypereutecticAl-Si alloys with different Fe contents |
Chong LIN, Shu-sen WU, Shu-lin Lü, Jin-biao ZENG,Ping AN |
665 |
Effect of pin penetration depth ondouble-sided friction stir welded joints of AA6061-T913 alloy |
Iman HEJAZI, Seyyed Ehsan MIRSALEHI |
676 |
Corrosion evaluation of friction stir welded lap joints ofAA6061-T6 aluminum alloy |
Farhad GHARAVI, Khamirul A. MATORI, Robiah YUNUS, Norinsan K. OTHMAN, Firouz FADAEIFARD |
684 |
Effects of Li addition on microstructure and mechanical properties of Mg-6Al-2Sn-0.4Mn alloys |
Yong-Ho KIM, Hyeon-Taek SON |
697 |
Effects of cooling rate on bio-corrosion resistance andmechanical properties of Mg-1Zn-0.5Ca casting alloy |
Li-dong WANG, Xue-song LI, Chao WANG, Li-min WANG, Zhan-yi CAO |
704 |
Plastic flow behavior of superalloy GH696 during hot deformation |
Zhao-hua XU, Miao-quan LI, Hong LI |
712 |
Thermal deformation behavior and mechanism of intermetallic alloy Ti2AlNb |
Qin-chai ZHANG, Ming-he CHEN, Hui WANG, Ning WANG, Jin-dong OUYANG, Xin-xiao LI |
722 |
Formation, microstructure and mechanical properties ofdouble-sided laser beam welded Ti-6Al-4V T-joint |
Xu-yi MA, Shui-li GONG, Jiu-xing ZHANG, Wei LU, Jing YANG |
729 |
Influence of material models on theoretical forming limit diagram prediction for Ti-6Al-4V alloy under warm condition |
Nitin KOTKUNDE, Sashank SRINIVASAN, Geetha KRISHNA, Amit Kumar GUPTA, Swadesh Kumar SINGH |
736 |
Functional Materials |
Synthesis of niobium borides by powder metallurgy methods usingNb2O5, B2O3 and Mg blends |
?zge Balc?, Duygu A?ao?ullar?, M. Lütfi ?ve?o?lu, ?smail Duman |
747 |
Structural and spectroscopic characterization of HgS nanoparticles prepared viasimple microwave approach in presence of novel sulfuring agent |
Hossein SAFARDOUST-HOJAGHAN, Maryam SHAKOURI-ARANI, Masoud SALAVATI-NIASARI |
759 |
Effect of catalytic activities of mixed nano ferrites of zinc and copper ondecomposition kinetics of lanthanum oxalate hydrate |
H. NAYAK |
767 |
Effects of germanium additions on microstructuresand properties of Al-Si filler metals for brazing aluminum |
Zhi-wei NIU, Ji-hua HUANG, Shu-hai CHEN, Xing-ke ZHAO |
775 |
Arc erosion behaviors of AgSnO2 contact materials prepared withdifferent SnO2 particle sizes |
Miao ZHANG, Xian-hui WANG, Xiao-hong YANG, Jun-tao ZOU, Shu-hua LIANG |
783 |
Effects of Ti-based additives on Mg2FeH6 dehydrogenation properties |
Chen-chen XU, Xue-zhang XIAO, Jie SHAO, Lang-xia LIU, Teng QIN, Li-xin CHEN |
791 |
Electroless plating and growth kinetics of Ni-P alloy film onSiCp/Al composite with high SiC volume fraction |
Meng FANG, Ling HU, Lei YANG, Chang-dong SHI, Yu-cheng WU, Wen-ming TANG |
799 |
Effects of current density on microstructure and properties ofplasma electrolytic oxidation ceramic coatings formed on 6063 aluminum alloy |
Nan XIANG,Ren-guo SONG,Jun-jie ZHUANG,Ruo-xi SONG,Xiao-ya LU,Xu-ping SU |
806 |
Structure and corrosion resistance ofmodified micro-arc oxidation coating on AZ31B magnesium alloy |
Xue-jun CUI, Rui-song YANG, Chun-hai LIU, Zu-xiao YU, Xiu-zhou LIN |
814 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
An elasto-plastic constitutive model forsoft rock considering mobilization of strength |
Hang-zhou LI, Guang-dong XIONG, Gui-ping ZHAO |
822 |
Effect of ore size and heap porosity on capillary process inside leaching heap |
Sheng-hua YIN, Lei-ming WANG, Xun CHEN, Ai-xiang WU |
835 |
Reaction behavior of ferric oxide insystem Fe2O3-SiO2-Al2O3 during reductive sintering process |
Qiu-sheng ZHOU, Chuang LI, Xiao-bin LI, Zhi-hong PENG, Gui-hua LIU, Tian-gui QI |
842 |
Formation mechanism and crystal simulation ofNa2O-doped calcium aluminate compounds |
Yong-pan TIAN, Xiao-lin PAN, Hai-yan YU, Gan-feng TU |
849 |
Redistribution of iron during directional solidification ofmetallurgical-grade silicon at low growth rate |
Chuan-hai GAN, Ming FANG, Lei ZHANG, Shi QIU, Jin-tang LI, Da-chuan JIANG, Shu-tao WEN, Yi TAN, Xue-tao LUO |
859 |
Recovery of cobalt and nickel in the presence of magnesium and calcium from sulfate solutions by Versatic 10 and mixtures of Versatic 10 and Cyanex 301 |
Qing-jun GUAN, Wei SUN, Gui-ying ZHOU, Jia-peng LIU, Zhi-gang YIN |
865 |
Solvent extraction and separation of copper from base metals usingbifunctional ionic liquid from sulfate medium |
Niharbala Devi |
874 |
Effect of phosphoric acid concentration on conductivity ofanodic passive film formed on surface of lead-indium alloy |
Abdel-Rahman EL-SAYED, Hossnia. S. MOHRAN, Hoda Abdel Shafy SHILKAMY |
882 |