Structural Materials |
Precipitation mechanism and property of Al-Zr-Y alloy |
GU Jing, TIAN Yuan, GAO Hai-yan, WANG Jun, SUN Bao-de |
243 |
Effects of solution treatment on microstructures and properties of 7B04 aluminum alloy |
LI Hong-ying, LIU Jiao-jiao, YU Wei-chen, HAO Zhuang-zhi |
252 |
Shielding effect of capsules and its impact on mechanical properties of P/M aluminium alloys fabricated by hot isostatic pressing |
LANG Li-hui, WANG Gang, HUANG Xi-na, YU Si, DUAN Wen, XU Qiu-yu |
261 |
Morphology of primary phase in semisolid aluminum-RE alloy underdifferent temperature fields |
ZHANG Jia-yi, LIU Zheng, SHENG Jun-bo |
272 |
Superplastic deformation behavior of cold-rolled Al-Mg-Sc-Zr alloy sheet |
SUN Xue, PAN Qing-lin, LI Meng-jia, SHI Yun-jia, YAN Jie |
280 |
Twinning and texture evolution in extruded AZ31 magnesium alloy during hot deformation |
LIU Xiao, ZHU Bi-wu, LI Luo-xing, TANG Chang-ping |
288 |
Effect of process parameters on dynamics of hydrogen gas bubble evolution in magnesium melt |
XU Si-xiang, SHI Hai-dong, WANG Ren-bao, ZHANG Bing-gang, ZHAI Jian-jian |
296 |
Effects of tantalum content on strengthening phase and high temperature oxidation behavior of Co-Al-W superalloy |
XU Yang-tao, SHA Qi-zhen, XIA Tian-dong |
302 |
Effects of preheating on morphology size and microstructure of laser deposition repair TA15 titanium alloy |
BIAN Hong-you, LEI Yang, LI Ying, YANG Guang, QIN Lan-yun, WANG Wei |
310 |
Effect of silicon on mechanical properties and annealing behavior of ultrafine grained brasses |
ZHANG Xiang-kai, YANG Xu-yue |
317 |
Interface formation and wear mechanism between characteristic friction components and base components of Cu-based powder metallurgy friction materials |
ZHOU Hai-bin, YAO Ping-ping, XIAO Ye-long, ZHANG Zhong-yi, GONG Tai-min, ZHAO Lin, DENG Min-wen, ZHONG Ai-wen, WANG Qi |
328 |
Functional Materials |
Growing characteristics of TiO2 nanotube array prepared byanodization method |
ZOU Jian-peng, TANG Ning-xin, LI Hong-chao, YANG Hong-zhi, XIAO Ping, PAN Yi-feng |
337 |
Effect of heating rate on crystal morphology and electrochemical performance of high voltage cathode material LiNi0.5Mn1.5O4 |
FENG Fu-shan, FANG Hai-sheng, YANG Bin,MA Wen-hui, DAI Yong-nian |
347 |
Microstructure and mechanical properties of hot extruded FGH96 powder metallurgy superalloy |
LIU Xiao-tao, DING Han-hui, YANG Chuan, LIU Feng, HUANG Lan, JIANG Liang |
354 |
Dynamic recrystallization kinetics and nucleation mechanism of Al-Cu-Li alloy based on flow behavior |
YANG Sheng-li, SHEN Jian, YAN Xiao-dong, LI Xi-wu, SUN Bao-qing, MAO Bai-ping |
365 |
Effect of forced cooling on microstructure of induction remelting Ni60 alloy coating |
WANG Peng-chun, LU Yang, YANG Xiao-tian, XIAO Rong-zhen, YANG Xiao-wei |
375 |
Effects of Al content on microstructure andmechanical properties of TiC-Fe alloys |
LONG Jian-zhan, XIA Yan-ping, CHEN Chong, LU Bi-zhi, YI Mao-zhong, WU Wen-hua |
383 |
Design and fabrication of PS/MSiO2 composite abrasives with radial mesoporous shells and their polishing behavior for oxidized silicon wafer |
CHEN Ai-lian, WANG Ya-yun, CHEN Yang |
392 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Polygenetic compound mineralization ofGuoluolongwa gold deposit in Qinghai Province, China |
LAI Jian-qing, JU Pei-jiao, ZHOU Feng |
402 |
A review of anisotropic surface properties of fluorite |
GAO Yue-sheng, GAO Zhi-yong, SUN Wei |
415 |
Influence of comminuting methods on full-slime cyaniding of low grade gold ore |
TANG Yuan, YIN Wan-zhong, CHI Xiao-peng |
423 |
Effect of feeding in aluminum reduction cell onelectrolyte temperature |
DING Pei-lin, WANG Heng, HUANG Jun, WANG Zi-qian, CAO Bin |
430 |
Influence factors on flocculation sedimentation ofunclassified tailings |
WU Ai-xiang, ZHOU Jing, YIN Sheng-hua, WANG Lei-ming |
439 |
Adsorption flotation of micro-fine grained single silver ore by activated carbon |
WANG Yi-jie, WEN Shu-ming, LIU Dian-wen, LIU Dan, CUI Chuan-fa |
447 |
Control mechanisms and critical characteristics indissolution of alumina particles |
LI Mao, BAI Xiao, LI Yuan, HOU Wen-yuan, GAO Yu-ting |
455 |
First-principles of depressing mechanism of starch inreverse-flotation of hematite |
ZHANG Xing-rong, ZHENG Gui-bing, AI Jing, LIU Chong-jun, SHANG Yan-bo |
465 |
Strengthening leaching for low grade molybdenum calcine by HNO3/NH4NO3 pretreatment technology |
GAN Min, ZENG Jin-lin, FAN Xiao-hui, ZHANG Lin, CHEN Xu-ling, WANG Yong, DENG Qiong, WANG Hai-bo |
471 |