Structural Materials |
Evolution of secondary phases and properties of 7B04 aluminum alloy during DC homogenization |
Li-zi HE, Pin-feng JIA, Lin ZHANG, Jian-zhong CUI |
319 |
Effects of reciprocating extrusion process on mechanical properties of AA 6061/SiC composites |
Veysel ERTURUN, M. Baki KARAMI? |
328 |
Ductility and hardness of chloride cleaned AA6011/SiCp composites |
S. O. ADEOSUN, E. I. AKPAN, O. P. GBENEBOR, S. A. BALOGUN |
339 |
Effects of reinforcement on wear resistance of aluminum matrix composites |
A. PRAMANIK |
348 |
Three-point bending performance of a new aluminum foam composite structure |
Ning-zhen WANG, Xiang CHEN, Ao LI, Yan-xiang LI, Hua-wei ZHANG, Yuan LIU |
359 |
Hot deformation behavior of high Ti 6061 Al alloy |
Wei CHEN, Ying-ping GUAN, Zhen-hua WANG |
369 |
Dislocation mechanism for dynamic recrystallization in twin-roll casting Mg–5.51Zn–0.49Zr magnesium alloy during hot compression at different strain rates |
Zhi-yi LIU, Tian-tian HUANG, Wen-juan LIU, Sukbong KANG |
378 |
Compressive anisotropy of extruded Mg-Dy-Zn alloy sheet |
Xiao-mei LUO, Guang-li BI, Jing JIANG, Ming LI, Rong-guang LI, Yuan-dong LI, Ying MA, Yuan HAO |
390 |
Thermal stability of nanocrystalline Mg-based alloys prepared via mechanical alloying |
M. RAJABI, R. M. SEDIGHI, S. M. RABIEE |
398 |
Wear behavior of Mg-10Y-4Gd-1.5Zn-0.4Zr alloy |
Mao-liang HU, Qu-dong WANG, Ze-sheng JI, Hong-yu XU, Ming-de XIN, Guo-rui MA |
406 |
Deformation behavior of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with two initial microstructures during hot working |
Jiao LUO, Lian LI, Miao-quan LI |
414 |
Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C |
Yi-wen LIU, Rui HU, Tie-bang ZHANG |
423 |
Segregation of niobium in laser cladding Inconel 718 superalloy |
Yi-tong LONG, Pu-lin NIE, Zhu-guo LI, Jian HUANG, Xiang LI, Xin-mei XU |
431 |
Effect of gap size on microstructure of transient liquid phase bonded IN-738LC superalloy |
Vahid MALEKI, Hamid OMIDVAR, Mohammad-reza RAHIMIPOUR |
437 |
Functional Materials |
Effect of annealing temperature on martensitic transformation of Ti49.2Ni50.8 alloy processed by equal channel angular pressing |
Dian-tao ZHANG, Bao GUO, Yun-xiang TONG, Bing TIAN, Li LI, Yu-feng ZHENG, Dmitry-V GUNDEROV, Ruslan-Z VALIEV |
448 |
Effect of intermetallic compound thickness on anisotropy of Al/Cu honeycomb rods fabricated by hydrostatic extrusion process |
Tae-hyuk LEE, Moon-soo SIM, Sin-hyeong JOO, Kyoung-tae PARK, Ha-guk JEONG, Jong-hyeon LEE |
456 |
Preparation of Zr-doped CaTiO3 with enhanced charge separation efficiency and photocatalytic activity |
Xiao-jun HUANG, Xin YAN, Hai-yan WU, Ying FANG, Ya-hong MIN, Wen-sheng LI, Shuang-yin WANG, Zhen-jun WU |
464 |
Corrosion resistance of cerium-doped zinc calcium phosphate chemical conversion coatings on AZ31 magnesium alloy |
Rong-chang ZENG, Yan HU, Fen ZHANG, Yuan-ding HUANG, Zhen-lin WANG, Shuo-qi LI, En-hou HAN |
472 |
Effect of Co content on electrodeposition mechanism and mechanical properties of electrodeposited Ni-Co alloy |
M. ZAMANI, A. AMADEH, S. M. LARI BAGHAL |
484 |
Influence of adipic acid on anodic film formation and corrosion resistance of 2024 aluminum alloy |
Ying-dong LI, You ZHANG, Song-mei LI, Pi-zhi ZHAO |
492 |
Computational Materials Science and Numerical Modelling |
Theoretical analysis of minimum metal foil thickness achievable by asymmetric rolling with fixed identical roll diameters |
Xin LIU, Xiang-hua LIU, Meng SONG, Xiang-kun SUN, Li-zhong LIU |
501 |
Deformation behavior and constitutive model for dual-phase Mg-Li alloy at elevated temperatures |
Guo-bing WEI, Xiao-dong PENG, Fa-ping HU, Amir HADADZADEH, Yan YANG, Wei-dong XIE, Mary A. WELLS |
508 |
First-principle calculations of interaction of O2 with pyrite, marcasite and pyrrhotite surfaces |
Cui-hua ZHAO, Jian-huaCHEN, Yu-qiong LI, Ye CHEN, Wei-zhou LI |
519 |
Radial mixing and segregation of granular bed bi-dispersed both in particle size and density within horizontal rotating drum |
Hui CHEN, Xian-qiong ZHAO, You-gang XIAO, Yi-lun LIU, Ying LIU |
527 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Influence of different phosphates on adsorption and leaching of Cu and Zn in red soil |
Zhong-wu LI, Bin HUANG, Jin-quan HUANG, Gui-qiu CHEN, Wei-ping XIONG, Xiao-dong NIE, Wen-ming MA, Guang-ming ZENG |
536 |
Enrichment of ferric iron on mineral surface during bioleaching of chalcopyrite |
Tang-jian PENG, Dan ZHOU, Xue-duan LIU, Run-lan YU, Tao JIANG, Guo-hua GU, Miao CHEN, Guan-zhou QIU, Wei-min ZENG |
544 |
Electrochemical behavior of galena and jamesonite flotation in high alkaline pulp |
Wei SUN, Chen SUN, Run-qing LIU, Xue-feng CAO, Hong-biao TAO |
551 |
Catalytic performance of biological method seeds on jarosite process |
Hai-jun LI, Hong-ying YANG, Guo-bao CHEN |
557 |
Oxidative leaching behavior of metalliferous black shale in acidic solution using persulfate as oxidant |
Zhi-xiong LIU, Yan-hong XIANG, Zhou-lan YIN, Xian-wen WU, Jian-bo JIANG, Yi-guang CHEN, Li-zhi XIONG |
565 |
Leaching behavior of metals from high-arsenic dust by NaOH-Na2S alkaline leaching |
Xue-yi GUO, Yu YI, Jing SHI, Qing-hua TIAN |
575 |
Corrosion and leaching behaviors of Sn-based alloy in simulated soil solutions |
Xiao-dong LAO, Cong-qian CHENG, Xiao-hua MIN, Jie ZHAO, Da-yu ZHOU, Li-hua WANG, Xiao-gang LI |
581 |
Electrochemical behavior of mesh and plate oxide coated anodes during zinc electrowinning |
Wei ZHANG, Michael ROBICHAUD, Edward GHALI, Georges HOULACHI |
589 |
Hydrogen absorption characteristics and microstructural evolution of TC21 titanium alloy |
Bao-guo YUAN, Yu-bin ZHENG, Yu-jie WANG, Long-qing GONG |
599 |