Structural Materials |
Low cycle fatigue behavior of T4-treated Al-Zn-Mg-Cu alloysprepared by squeeze casting and gravity die casting |
Cheng-kun ZHENG, Wei-wen ZHANG, Da-tong ZHANG, Yuan-yuan LI |
3505 |
Microstructure and mechanical properties ofhigh strength Al-Zn-Mg-Cu alloys used for oil drill pipes |
Chun FENG, Wen-bin SHOU, Hui-qun LIU, Dan-qing YI, Yao-rong FENG |
3515 |
Influence of Cu content on microstructure andmechanical properties of thixoformed Al-Si-Cu-Mg alloys |
M. S. SALLEH, M. Z. OMAR |
3523 |
Effects of Be additions on microstructure, hardness andtensile properties of A380 aluminum alloy |
Morteza REJAEIAN, Mostafa KARAMOUZ, Masoud EMAMY, Mohsen HAJIZAMANI |
3539 |
Effects of Mn and Sn on microstructure ofAl-7Si-Mg alloy modified by Sr and Al-5Ti-B |
Ke QIU, Ri-chu WANG, Chao-qun PENG, Nai-guang WANG, Zhi-yong CAI, Chun ZHANG |
3546 |
Existing form and harmful effects of sodium in Al-4.5%Cu alloy |
Le FENG, Yi-min SUN, Xiao-lin ZHAO, Ri-ming WANG, Kai ZHANG, Jin-yue YANG |
3553 |
Microstructural evolution during homogenization ofDC cast 7085 aluminum alloy |
Yun-jia SHI, Qing-lin PAN, Meng-jia LI, Zhi-ming LIU, Zhi-qi HUANG |
3560 |
Microstructural characterization and mechanical properties of functionally graded Al2024/SiC composites prepared by powder metallurgy techniques |
F. ERDEMIR, A. CANAKCI, T. VAROL |
3569 |
Deformation behaviors and processing maps ofCNTs/Al alloy composite fabricated by flake powder metallurgy |
Wei-jun HE, Chun-hong LI, Bai-feng LUAN, Ri-sheng QIU, Ke WANG, Zhi-qiang LI, Qing LIU |
3578 |
Evolution of twins and texture and its effects on mechanical properties ofAZ31 magnesium alloy sheets under different rolling process parameters |
Di LIU, Zu-yan LIU, Er-de WANG |
3585 |
Simulation of mechanical behavior ofAZ31 magnesium alloy during twin-dominated large plastic deformation |
Zhi-qiang WANG, Adrien CHAPUIS, Qing LIU |
3595 |
Influence of pre-strain and heat treatment onsubsequent deformation behavior of extruded AZ31 Mg alloy |
Hong-bing CHEN, Tian-mo LIU, Li-wei LU , Jie-jun HE, Yan-bo ZHAI |
3604 |
Influence of temperature and strain rate onserration typetransition in NZ31 Mg alloy |
Wen-hui WANG, Di WU, Rong-shi CHEN, Chang-sheng LOU |
3611 |
Heat transfer behavior of AZ80-1%Y alloyduring low-frequency electromagnetic casting |
Lei BAO, Zhi-qiang ZHANG, Qi-chi LE, Li-li RU, Jian-zhong CUI |
3618 |
Application of response surface methodology to optimize processparameters in friction welding of Ti-6Al-4V and SS304L rods |
R. KUMAR, M. BALASUBRAMANIAN |
3625 |
Functional Materials |
Photocatalytic activity of CuO nanoparticles incorporated in mesoporous structure prepared from bis(2-aminonicotinato) copper(II) microflakes |
Azadeh TADJARODI, Omid AKHAVAN, Keyvan BIJANZAD |
3634 |
Fabrication of Cu2O@Cu2O core-shell nanoparticles and conversion toCu2O@Cu core-shell nanoparticles in solution |
Ai-ling YANG, Shun-pin LI, Yu-jin WANG, Le-le WANG, Xi-chang BAO, Ren-qiang YANG |
3643 |
Synthesis of α-Fe2O3@SnO2 core-shell nanoparticles vialow-temperature molten salt reaction route |
Gang LIU, Wei-jia SUN, Sha-sha TANG, Shu-quan LIANG, Jun LIU |
3651 |
Morphology, photoluminescence and gas sensing ofCe-doped ZnO microspheres |
Yan Li, Jin-cheng Liu, Xiao-xue Lian, Tan Lü, Fang-xian Zhao |
3657 |
Effect ofpH value and calcination temperature on synthesis andcharacteristics of Cu-Ni nano-alloys |
María de los A. CANGIANO, Manuel W. OJEDA, María del C. RUIZ |
3664 |
Effect of Cu ion substitution on structural anddielectric properties of Ni-Zn ferrites |
Guang-sheng LUO, Wei-ping ZHOU, Jian-de LI, Gui-wen JIANG, Shao-long TANG, You-wei DU |
3678 |
Preparation of ultra-fine grain Ni-Al-WC coating with interlocking bonding onaustenitic stainless steel by laser clad and friction stir processing |
Yong-jun XIONG, Zi-li QIU, Rui-di LI, Tie-chui YUAN, Hong WU, Jin-hui LIU |
3685 |
Tribological behaviors of Fe-Al-Cr-Nb alloyed layer deposited on45 steel via double glow plasma surface metallurgy technique |
Xi-xi LUO, Zheng-jun YAO, Ping-ze ZHANG, Yu CHEN, Hong-qin YANG, Xiao-feng WU, Ze-lei ZHANG, Yu-hua LIN, Shang-jun XU |
3694 |
Comparison between WC-10Co-4Cr andCr3C2-25NiCr coatings sprayed on H13 steel by HVOF |
Wen-chao ZHANG, Li-bin LIU, Meng-ting ZHANG, Guo-xing HUANG, Jia-si LIANG, Xian LI, Li-gang ZHANG |
3700 |
Fabrication and ablation property ofcarbon/carbon composites with novel SiC-ZrB2 coating |
Dong HUANG, Ming-yu ZHANG, Qi-zhong HUANG, Li-ping WANG, Xian TANG, Xin YANG, Kai TONG |
3708 |
Friction and wear behaviors of TiCN coating based onelectrical discharge coating |
Zhao-yubo ZENG, Hou-qun XIAO, Xiao-hua JIE, Yan-mei ZHANG |
3716 |
Surface modification with SiO2 coating onbiomedical TiNi shape memory alloy by sol-gel method |
Shu YANG, Fei ZHOU, Tao XIAO, Da-bao XU, Zhou LI, Zhu XIAO, Zi-an XIAO |
3723 |
Electrochemical hydrogen storage properties ofnon-equilibrium Ti2-xMgxNi alloys |
Jia-jia Li, Jun-feng Zhou, Xiang-yu Zhao, Meng Yang, Li-qun Ma, Xiao-dong Shen |
3729 |
Electrochemical properties of nanocrystalline andamorphous Mg-Y-Ni alloys applied to Ni-MH battery |
Yang-huan ZHANG, Zhong-gang HAN, Ze-ming YUAN, Tai YANG, Yan QI, Dong-liang ZHAO |
3736 |
Effects of gallium on electrochemical discharge behavior ofAl-Mg-Sn-In alloy anode for air cell or water-activated cell |
Kun YU, Shi-haiYANG, Han-qingXIONG, LiWEN, Yi-longDAI, FeiTENG, Su-fengFAN |
3747 |
Ambient electrical conductivity of carbon cathode materials foraluminum reduction cells |
Jun ZHU, Ji-lai XUE, Ya-nan ZHANG, Xiang LI, Tong CHEN |
3753 |
In vitro and in vivo evaluation of effects of Mg-6Zn alloy ontight junction of intestinal epithelial cell |
Song YU, Xiao-hu WANG, Yi-gang CHEN, Qi ZHENG, Xiao-nong ZHANG, Chang-li ZHAO, Shao-xiang ZHANG, Jun YAN |
3760 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Recovery of vanadium and carbon from low-grade stone coal by flotation |
Li WANG, Wei SUN, Qing-peng ZHANG |
3767 |
Thermodynamic and kinetic of iodine-iodide leaching in gold hydrometallurgy |
S. S. KONYRATBEKOVA, A. BAIKONUROVA, G.A. USSOLTSEVA, C. ERUST, A. AKCIL |
3774 |
Leaching characteristics ofion-adsorption type rare earths ore with magnesium sulfate |
Yan-fei XIAO, Ying-ying CHEN, Zong-yu FENG, Xiao-wei HUANG, Li HUANG, Zhi-qi LONG, Da-li CUI |
3784 |
Autocatalytic deposition of copper frommodified electrolytes and its characteristics |
R. SEKAR, K. K. JAGADESH, G. N. K. RAMESH BAPU |
3791 |
Deep removal of copper from nickel electrolyte using manganese sulfide |
Jiang-tao LI, Ai-liang CHEN |
3802 |
Preparation and characterization of eco-friendly poly(p-phenylenediamine) and its composite with chitosan for removal of copper ions from aqueous solutions |
N. A. ABDELWAHAB, E. A. AL-ASHKAR, M. A. ABD EL-GHAFFAR |
3808 |
Novel method to prepare sodium chromate from carbon ferrochrome |
Jia-liang WANG, Guo-rong HU, Zhong-dong PENG, Ke DU |
3820 |
Reaction pathway led by silicate structure transformation on decomposition ofCaSiO3 in alkali fusion process using NaOH |
Chang-ming ZHAO, Guo-cheng WANG, Sheng-liLI, Xin-gang AI, Zi-rui WANG, Yu-chun ZHAI |
3827 |
Volume change of macropores of titanium foams during sintering |
Jian XIAO, Yang YANG, Gui-bao QIU, Yi-long LIAO, Hao CUI, Xue-wei Lü |
3834 |
Hot corrosion characteristics of Ni-20Cr-18W superalloy in molten salt |
Tie-bang ZHANG, Rui-feng DONG, Rui HU, Hong-chao KOU, Jin-shan LI |
3840 |
Effect of cerium ion (III) on corrosion resistance of organic-inorganic hybrid coating on surface of aluminum-tube used in refrigeration equipment |
Wei XIAO, Chang MIAO, Xiong HUANG, Rui-lin MAN |
3847 |