Review |
High-throughput experimental determination and thermodynamic assessment of phase diagrams of nickel-based superalloys |
ZHU Li-long, QI Hai-ying, JIANG Liang, JIN Zhan-peng |
2953 |
Research progress of high-temperature tribologicalproperties of silver-containing hard coatings |
HE Peng-fei, WANG Hai-dou, MA Guo-zheng, YONG Qing-song, CHEN Shu-ying, XU Bin-shi |
2962 |
Structural Materials |
Bulging simulation of ductile fracture of 5052 aluminum alloy |
YU Hai-yan, WANG You |
2975 |
Milling surface properties of 7050-T7451aluminum alloy and establishment of constitutive model |
YU Xin, SUN Jie, XIONG Qing-chun, HAN Xiong |
2982 |
Effect of inhibition properties of several amino acids oncorrosion property of 7B50 aluminium alloy in1 mol/L NaCl+0.1 mol/L HCl |
YANG Biao-biao, SUN Qing-qing, SUN Rui-ji, SHAO Shou-qi, LIU Yang, CHEN Kang-hua |
2990 |
Effect of non-isothermal retrogression and re-ageing onthrough-thickness homogeneity of microstructure and properties in7055 aluminum alloy medium thick plate |
FENG Di, ZHANG Xin-ming, LIU Sheng-dan |
3000 |
Investigation and development of inverse analysis method toestimate inherent deformation of Al-alloy thin-plate joint |
LIANG Wei, DENG De-an, MURAKAWA Hidekazu |
3011 |
Effect of pre-recovery treatment on microstructure andproperties of ultra high strength aluminum alloyextrusion treated by solid solution–T652 treatment |
TAN Cheng, XU Xiao-jing, JIANG Wei, SUN Liang-sheng, ZHANG Xiang-li, FAN Ya-zhou, ZHAO Jian-ji |
3019 |
Simulation and analysis on chaotic characteristic offlow in Al alloy melt under electromagnetic field |
LIU Zheng, ZHANG Jia-yi, YU Zhao-fu |
3026 |
Corrosion resistance of Al-Cu-Mg-Ag new heat-resistant Al alloy |
QI Hao, LIU Xiao-yan, LIANG Shun-xing, ZHANG Xi-liang, CUI Hao-xuan, GAO Fei, CHEN Qi-huai |
3033 |
Effect of Si content on microstructures and mechanical properties of Al-5.0Cu-0.6Mn-0.7Fe alloy prepared by squeeze casting |
ZHAO Yu-liang, MENG Fan-sheng, ZHANG Yang, ZHANG Da-tong, YANG Chao, ZHANG Wei-wen |
3040 |
Static recrystallization behavior of multi-directionallyforged AZ31 magnesium alloy at room temperature |
JIANG Li-ping, WANG Jun, XIAO Zhen-yu, ZHANG Du-xiu, YANG Xu-yue |
3051 |
Molecular dynamics calculation of Al grain boundaryenergy based on modified spherical bicrystal model |
ZHANG Ming-liang, YANG Liang, WEI Cheng-yang, LI Sai-yi, ZHANG Xin-ming |
3060 |
Microstructure and fracture behavior of arc welding-brazingjoints between titanium and aluminum dissimilar alloys |
Ma Zhi-peng, YU Xin-long, MENG Qing-wu |
3067 |
Microstructure evolution behavior ofDD6 single crystal superalloy at different using temperatures |
SHI Zhen-xue, LIU Shi-zhong, XIONG Ji-chun, LI Jia-rong |
3077 |
Effect of Si on microstructures and oxidation resistance ofFeMoCrNi high temperature wear-resistance alloys |
LI Jie-fei, YIN Fu-cheng, LIU Yong-xiong, OUYANG Xue-mei, LI Zhi, ZHAO Man-xiu |
3084 |
Quasi-static and dynamic failure evolution oftitanium alloy under forced shear loading |
FU Ying-qian, DONG Xin-long, HU Hong-zhi |
3092 |
First-principles of hydrogen diffusion mechanism in titanium crystals |
LIU Song, WANG Yin-gang |
3100 |
Application of deep hole drilling technique onstress measurement of aluminum alloy component |
LIAO Kai, LIU Yi-peng, CHANG Xing-yu, ZHAO Qing |
3107 |
Functional Materials |
Modeling and optimization of actuation strain property ofpiezoelectric fiber composites |
WANG Xiao-yu, CONG Qiang, LIN Xiu-juan, CHEN Hai-yan, WANG Hao-wei, ZHOU Ke-chao, ZHANG Dou |
3113 |
Plastic characterization and performance ofSn-Ag-Cu lead-free BGA solder joint |
YANG Miao-sen, SUN Feng-lian, KONG Xiang-xia, ZHOU Yun-fang |
3119 |
Synthesis and photocatalytic properties ofnano-Ag@AgCl loaded activated carbon material |
LIU Wen-sheng, CHENG Fan, MA Yun-zhu, YU Qiang, WANG Yi-kai |
3126 |
Comparison for microstructure and mechanical properties of electrodeposited nickel and rolled nickel |
XIA Tian-dong, ZHANG Xiao-yu, XU Yang-tao, DING Wan-wu, ZHAO Wen-jun |
3133 |
Preparation and characterization ofmultiwalled carbon nanotube with low resistivity |
YAO Hui, CAI Wei, ZHAO Yong-sheng, WANG Li-min, HE Wei |
3141 |
Arc erosion behaviors of CuW70 electricalcontact materials adding LaB6 |
CHEN Juan, WANG Xian-hui, CHENG Jun, YANG Xiao-hong, ZOU Jun-tao |
3147 |
High temperature separation between silicon and liquationagent after solvent refining enhanced by super gravity force |
CHEN hang, WANG zhi, CHI Ru-an, JING Qing-xiu, SUN Li-yuan, DU Bing |
3155 |
Effect of composite fiber content on strength and breathability ofsilica sol shell for investment casting |
LU Gang, MAO Pu, YAN Qing-song, JI Chao-zhong, RAO Wen-jie |
3164 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Petrogenesis of Batuan intrusion: Constraints frompetro-geochemistry, zircon U-Pb dating and Hf isotope |
ZHENG Ming-hong, SHAO Yong-jun, WEI Han-tao, XIONG Yi-qu, ZOU Yan-hong, TAN Hua-jie |
3171 |
2.5D focusing inversion for borehole-surface electrical databased on minimum gradient support function |
ZHANG Zhi-yong, ZHOU Feng, LI Ze-lin |
3182 |
Pipeline transportation characteristics offilling paste-like slurry pipeline in deep mine |
ZHANG Qi-li, LIU Qi, ZHAO Jian-wen, LIU Jian-gang |
3190 |
Inversion numerical calculation of 2D CSAET generated byline current source |
CAO Chuang-hua, TONG Xiao-zhong, LIU Jian-xin |
3196 |
Separation of antimony fromtin anode slime by sulfidation roasting |
LU Hong-bo |
3202 |
Numerical simulation of flow field in rare earth electrolysis cell |
LIU Zhao, LI Zong-an, ZHANG Xiao-wei, PANG Si-ming, CHEN De-hong, WANG Zhi-qiang |
3209 |
Formation free energy of Na2PbO2 and Na2ZnO2measured by electromotive force method |
WANG Zhi-meng, XIE Hong-wei, ZHANG Yi, ZHAI Yu-chun |
3216 |
Two stage leaching process ofcopper-cobalt oxide ore in Central Africa |
LI Shu-mei, LIU Kai-hua, LI Hui, CONG Zi-fan |
3223 |
Cycle leaching of low grade zinc oxide ores in Ida2--H2O system |
DOU Ai-chun, YANG Tian-zu, LIU Yun-jian, SU Ming-ru |
3229 |
Adsorption mechanisms of uranium (VI) fromaqueous solution by G-PA-SBA-15 |
PENG Guo-wen, XIAO Fang-zhu, DING De-xin, ZHANG Zhi-jun, HU Nan, WANG Xiao-liang, ZHOU Gui, HUANG Hong, YANG Jin-ran |
3237 |