Structural Materials |
Effects of cold rolling and heat treatment on microstructure and mechanical properties of AA 5052 aluminum alloy |
Bo WANG, Xian-hua CHEN, Fu-sheng PAN, Jian-jun MAO,Yong FANG |
2481 |
Comparison of microstructure and wear resistance of A356-SiCp composites processed via compocasting and vibrating cooling slope |
H. KHOSRAVI, F. AKHLAGHI |
2490 |
Optimizing consolidation behavior of Al 7068-TiC nanocomposites using Taguchi statistical analysis |
Amin AZIMI, Ali SHOKUHFAR, Omid NEJADSEYFI, Hamid FALLAHDOOST, Saeid SALEHI |
2499 |
Corrosion and electrochemical behaviors of 7A09 Al-Zn-Mg-Cu alloy in chloride aqueous solution |
Kun ZHOU, Bin WANG, Yu ZHAO, Jie LIU |
2509 |
Porosity sensitivity of A356 Al alloy during fiber laser welding |
Kai LI, Feng-gui LU, Song-tao GUO, Hai-chao CUI, Xin-hua TANG |
2516 |
Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy |
Yu CHEN, Hua DING, Ji-zhong LI, Jing-wei ZHAO, Ming-jie FU, Xiao-hua LI |
2524 |
Microstructures and mechanical properties of metal inert-gas arc welded Mg-steel dissimilar joints |
Xiao-yong WANG, Da-qian SUN, Shi-qiang YIN, Dong-yang LIU |
2533 |
Wear behavior and mechanism of B4C reinforced Mg-matrix composites fabricated by metal-assisted pressureless infiltration technique |
Yan-tao YAO, Lan JIANG, Gao-feng FU, Li-qing CHEN |
2543 |
Microstructural stability of long term aging treated Ti-22Al-26Nb-1Zr orthorhombic titanium aluminide |
Tie-bang ZHANG, Gang HUANG, Rui HU, Jin-shan LI |
2549 |
Corrosion behavior of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications in Ringer’s solution |
Yan-fei XU, Yi-feng XIAO, Dan-qing YI, Hui-qun LIU, Liang WU, Jing WEN |
2556 |
Thermal activation parameters of V-5Cr-5Ti alloy under hot compression |
Yu-fei LI, Zhen-hong WANG, Yun-hong ZHOU, Chao LUO, Xin-chun LAI |
2564 |
Segmentation of copper alloys processed by equal-channel angular pressing |
Omid NEJADSEYFI, Ali SHOKUHFAR, Vahid MOODI |
2571 |
Functional Materials |
Microstructure and superhardness effect of VC/TiC superlattice films |
Xue-chao DONG, Jian-ling YUE, En-qing WANG, Miao-lei LI, Ge-yang LI |
2581 |
Effect of Al-deposition on erosion resistance of plasma sprayed thermal barrier coating |
Xiao-feng ZHANG, Ke-song ZHOU, Shu-juan DONG, Wei XU, Jin-bing SONG, Min LIU |
2587 |
Corrosion properties of stainless steel 316L/Ni-Cu-P coatings in warm acidic solution |
Xin-xian FANG, Heng-zhi ZHOU, Ya-jun XUE |
2594 |
Hydrophilic and photocatalytic activities of Nd-doped titanium dioxide thin films |
Jun DU, Xin GU, Qi WU, Jiao LIU, Hai-zhi GUO, Jian-guo ZOU |
2601 |
Influence of processing parameters on laser metal deposited copper and titanium alloy composites |
Mutiu F. ERINOSHO, Esther T. AKINLABI, Sisa PITYANA |
2608 |
Transition of plasticity and fracture mode of Zr-Al-Ni-Cu bulk metallic glasses with network structures |
An-hui CAI, Da-wei DING, Wei-ke AN, Guo-jun ZHOU, Yun LUO, Jiang-hong LI, Yong-yi PENG |
2617 |
Effect of melt infiltration parameters on microstructure and mechanical properties of tungsten wire reinforced (Cu50Zr43Al7)99.5Si0.5 metallic glass matrix composite |
Ebrahim Karimi SAEIDABADI, Reza GHOLAMIPOUR, Behrouz GHASEMI |
2624 |
Thermodynamics and characterization of shape memory Cu-Al-Zn alloys |
Lidija GOMID?ELOVI?, Emina PO?EGA, Ana KOSTOV, Nikola VUKOVI?, Vesna KRSTI?, Dragana ?IVKOVI?, Ljubi?a BALANOVI? |
2630 |
Dielectric properties and relaxation dynamics in PbF2-TeO2-B2O3-Eu2O3 glasses |
Akshatha WAGH, Y. RAVIPRAKASH, Sudha D. KAMATH |
2637 |
Preparation of Cr2O3-based pigments with high NIR reflectance via thermal decomposition of CrOOH |
Shu-ting LIANG, Hong-ling ZHANG , Min-ting LUO, Hong-xia LIU, Yu-lan BAI, Hong-bin XU, Yi ZHANG |
2646 |
Preparation of fibrous nickel powder by precipitation transformation coupled with thermal decomposition |
Jian-hui WU, Gang LIU, Tao SU, Wen-hong ZHANG, Mei-mei LUO, Tao WEI |
2653 |
Fe3+/Fe2+ redox electrolyte for high-performance polyaniline/SnO2 supercapacitors |
Tian-tian LIU, Yin-hai ZHU, En-hui LIU, Zhen-yu LUO, Tian-tian HU, Zeng-peng LI, Rui DING |
2661 |
Computational Materials Science and Numerical Modelling |
Atomic simulation for influence of helium atom on movement of edge dislocation in nickel |
Xi-yuan YANG |
2666 |
Horizontal continuous casting process under electromagnetic field for preparing AA3003/AA4045 clad composite hollow billets |
Li WU, Hui-jun KANG, Zong-ning CHEN, Ning LIU, Tong-min WANG |
2675 |
Electroplastic effect in AZ31B magnesium alloy sheet through uniaxial tensile tests |
Huan-yang XIE, Qian WANG, Fang PENG, Kai LIU, Xiang-huai DONG, Jian-feng WANG |
2686 |
Nominal friction coefficient in spread formulas based on lead rolling experiments |
Hong-yu WANG, Yu-kun HU, Feng GAO, De-wen ZHAO, Dian-hua ZHANG |
2693 |
Prediction of vulnerable zones based on residual stress and microstructure in CMT welded aluminum alloy joint |
Feng-yuan SHU, Ze TIAN, Yao-hui Lü, Wen-xiong HE, Fei-yang Lü, Jian-jun LIN, Hong-yun ZHAO, Bin-shi XU |
2701 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Mechanical behavior of red sandstone under cyclic point loading |
Zi-long ZHOU, Zhi-bo WU, Xi-bing LI, Xiang LI, Chun-de MA |
2708 |
Function of microorganism and reaction pathway for carrollite dissolution during bioleaching |
Hong-ying YANG, Wei LIU, Guo-bao CHEN, Yuan-yuan LIU, Lin-lin TONG, Zhe-nan JIN, Zi-long LIU |
2718 |
Surface species of chalcopyrite during bioleaching by moderately thermophilic bacteria |
Hong-bo ZHAO, Jun WANG, Wen-qing QIN, Xi-hua ZHENG, Lang TAO, Xiao-wen GAN, Guan-zhou QIU |
2725 |
Crystallization of gibbsite from synthetic chromate leaching solution in sub-molten salt process |
Pei-yu ZHANG, Guang-ye WEI, Qiang GUO, Jing-kui QU, Tao QI |
2734 |
Selective reduction process of zinc ferrite and its application in treatment of zinc leaching residues |
Gang YU, Ning PENG, Lan ZHOU, Yan-jie LIANG, Xiao-yuan ZHOU, Bing PENG, Li-yuan CHAI, Zhi-hui YANG |
2744 |
Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodology |
Mehmet KUL, Kür?ad O?uz OSKAY, Mehmet ??M??R, Halit SüBüTAY, Habip KIRGEZEN |
2753 |
Comparative studies on hydrometallurgical treatment of smelted low-grade electronic scraps for selective copper recovery |
Ewa RUDNIK, Karolina KO?CZYK, Dawid KUTY?A |
2763 |
Vapor pressure measurement of lead and lead chlorides in FeOT-CaO-SiO2-Al2O3 system |
Yan-ling ZHANG, Eiki KASAI |
2772 |
Oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process |
Yu-tong ZHOU, Yan-xiang LI |
2781 |
Rheological property and drying mechanism of thermoresponsive gelcasting of ZnO |
Xiao-feng WANG, Ri-chu WANG, Chao-qun PENG, Wen-yan SUN, Yue-hua SUN |
2789 |
New interpretation of experimental data on Si-As alloy solidification with planar interface |
S. L. SOBOLEV |
2797 |
Role of Ni content in improvement of corrosion resistance of Zn-Ni alloy in 3.5% NaCl solution. Part I: Polarization and impedance studies |
Hany M. ABD EL-LATEEF, Abdel-Rahman EL-SAYED, Hossnia S. MOHRAN |
2807 |