Structural Materials |
Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys |
F. BERGE, L. KRüGER, H. OUAZIZ, C. ULLRICH |
1 |
Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling |
Fei GUO, Ding-fei ZHANG, Xu-sheng YANG, Lu-yao JIANG, Fu-shengPAN |
14 |
Microstructures and mechanical properties of Mg-Al-Sm series heat-resistant magnesium alloys |
Zheng-hua HUANG, Wen-jun QI, Jing XU, Chang CAI |
22 |
Microstructure and properties of plasma remelted AZ91D magnesium alloy |
Hong-zhi CUI, Zhao-tao MENG, Cheng-zhu XIAO, Jin-quan SUN, Cui-xiang WANG |
30 |
Microstructural development and its effects on mechanical properties of Al/Cu laminated composite |
Xiao-bing LI, Guo-yin ZU, Ping WANG |
36 |
Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route |
A. FATHY, Omyma EL-KADY, Moustafa M. M. MOHAMMED |
46 |
Distribution and engulfment behavior of TiB2 particles or clusters in wedge-shaped copper casting ingot |
Jing SUN, Xiao-bo ZHANG, Qing CAI, Yi-jie ZHANG, Nai-heng MA, Hao-wei WANG |
54 |
Influence of plate length and plate cooling rate on solidification and microstructure of A356 alloy produced by oblique plate |
N. K. KUND |
61 |
Microstructure and mechanical properties of TC21 titanium alloy by near-isothermal forging |
Zhi-feng SHI, Hong-zhen GUO, Rui LIU, Xiao-chen WANG, Ze-kun YAO |
72 |
Bonding interface characteristic and shear strength of diffusion bonded Ti-17 titanium alloy |
Hong LI, Chao ZHANG, Hong-bin LIU, Miao-quan LI |
80 |
Hot deformation and processing map of GH3535 superalloy |
Ya-qi JI, Shun-de QU, Wei-xin HAN |
88 |
Influence of tool rotational speed on microstructure and sliding wear behavior of Cu/B4C surface composite synthesized by friction stir processing |
R. SATHISKUMAR, I. DINAHARAN, N. MURUGAN, S. J. VIJAY |
95 |
Microstructure, mechanical properties and wear behaviour of Zn-Al-Cu-TiB2 in situ composites |
Fei CHEN, Tong-min WANG, Zong-ning CHEN, Feng MAO, Qiang HAN, Zhi-qiang CAO |
103 |
Functional Materials |
Research progress of Ag3PO4-based photocatalyst: Fundamentals and performance enhancement |
Yun-zhu MA, Fan CHENG, Wen-sheng LIU, Juan WANG, Yi-kai WANG |
112 |
Magnetostriction and microstructure of melt-spun Fe77Ga23 ribbons prepared with different wheel velocities |
Hao LIU, Hai-ou WANG, Meng-xiong CAO, Wei-shi TAN, Yang-guang SHI, Feng XU, Quan-jie JIA , Yu-ying HUANG |
122 |
Solution combustion synthesis of Ni-Y2O3 nanocomposite powder |
Ye LIU, Ming-li QIN, Lin ZHANG, Bao-rui JIA, Zhi-qin CAO, De-zhi ZHANG, Xuan-hui QU |
129 |
Effects of Fe2O3 content on microstructure and mechanical properties of CaO-Al2O3-SiO2 system |
Xiang-zhong REN, Wei ZHANG, Yong ZHANG, Pei-xin ZHANG, Jian-hong LIU |
137 |
Fabrication and characterization of electrodeposited nanocrystalline Ni-Fe alloys for NiFe2O4 spinel coatings |
Li MA, Long ZHANG, Xiao-bing LI, Zhi-you LI, Ke-chao ZHOU |
146 |
Thermal conductivity of carbon nanotube-silver composite |
Hemant PAL, Vimal SHARMA |
154 |
Compressive behavior of Zn-22Al closed-cell foams under uniaxial quasi-static loading |
A. Heydari ASTARAIE, H. R. SHAHVERDI, S. H. ELAHI |
162 |
Microstructure and thermophysical properties of SiC/Al composites mixed with diamond |
Hong GUO, Yuan-yuan HAN, Xi-min ZHANG, Cheng-chang JIA, Jun XU |
170 |
Effect of TiO2 content on properties of Al2O3 thermal barrier coatings by plasma spraying |
Sheng-kai JIA, Yong ZOU, Ji-yuan XU, Jing WANG, Lei YU |
175 |
High temperature oxidation resistance and microstructure change of aluminized coating on copper substrate |
Hong-xing WANG, Yan ZHANG, Jia-lin CHENG, Yu-shan LI |
184 |
Oxidation and hot corrosion of electrodeposited Ni-7Cr-4Al nanocomposite |
Hai-jun ZHANG, Jian-feng SUN |
191 |
Properties of Zn-Bi composite coatings prepared by ionic co-discharge deposition |
See Leng TAY, Wei-wei CHEN, Xiao-jin WEI, Cai-zhen YAO, Wei GAO |
199 |
Effect of linear carboxylic ester on low temperature performance of LiMn2O4-graphite cells |
Shu HONG, Jie LI, Guan-chao WANG, Zhi-an ZHANG, Yan-qing LAI |
206 |
Computational Materials Science and Numerical Modelling |
Alloy gene Gibbs energy partition function and equilibrium holographic network phase diagrams of Au3Cu-type sublattice system |
Youq-qing XIE, Yao-zhuang NIE, Xiao-bo LI, Hong-jian PENG, Xin-bi LIU |
211 |
Phase-field modeling of dendritic growth under forced flow based on adaptive finite element method |
Chang-sheng ZHU, Peng LEI, Rong-zhen XIAO, Li FENG |
241 |
Crystal anisotropy of AZ31 magnesium alloy under uniaxial tension and compression |
Yong-ting LAN, Xian-ciZHONG, Gao-fengQUAN, Ruo-cheng LIN, Ke-shi ZHANG |
249 |
Finite element analysis of stress distribution and burst failure of SiCf/Ti-6Al-4V composite ring |
Hong-yuan ZHANG, Yan-qing YANG, Xian LUO |
261 |
Non-contact measurement and multi-objective analysis of drilling temperature when drilling B4C reinforced aluminum composites |
A. TASKESEN, K. KUTUKDE |
271 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Geochemistry of intrusive rock in Dachang tin-polymetallic ore field, Guangxi, China: Implications for petrogenesis and geodynamics |
Yong-sheng CHENG |
284 |
Three-dimensional analytical solution of acoustic emission source location for cuboid monitoring network without pre-measured wave velocity |
Long-jun DONG, Xi-bing LI, Zi-long ZHOU, Guang-hui CHEN, Ju MA |
293 |
Comparison of electrochemical dissolution of chalcopyrite and bornite in acid culture medium |
Hong-bo ZHAO, Ming-hao HU, Yi-ni LI, Shan ZHU, Wen-qing QIN, Guan-zhou QIU, Jun WANG |
303 |
Flotation of carbonaceous copper shale-quartz mixture with poly(ethylene glycol) alkyl ethers |
Przemyslaw B. KOWALCZUK, Emilia ZALESKA, Oliver DANCZAK |
314 |
Mechanism analysis of ions interaction in MgCl2/LiCl solution and effect of lithium on ammonia precipitation products |
Jin TAN, Zheng-ping WU, Yuan-bing SUN, Jin-ling ZHANG, Zhou-lan YIN, Qi-yuan CHEN |
319 |
Solvent extraction of rubidium and cesium from salt lake brine with t-BAMBP-kerosene solution |
Shi-ming LIU, He-hui LIU, Yun-jing HUANG, Wei-jun YANG |
329 |
Effect of gas bubble on cell voltage oscillations based on equivalent circuit simulation in aluminum electrolysis cell |
Yong-liang WANG, Jun TIE, Gan-feng TU, Shu-chen SUN, Ren-tao ZHAO, Zhi-fang ZHANG |
335 |
Electrochemical characterization of Ti12Mo5Ta alloys in contact with saline medium |
Daniel MARECI, Romeu CHELARIU, Adrian CAILEAN, Florin BRINZA, Georgiana BOLAT, Doina Margareta GORDIN |
345 |
Oxidation behavior of Hastelloy C-2000 superalloy at 800 °C and 1000 °C |
Liang YUAN, Rui HU, Tie-bang ZHANG, Jin-shan LI, Xiao-qing ZHANG |
354 |