Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第24卷    第9期    2014年9月


结构材料
AZ31B 镁合金在高应变速率下的热压缩变形行为和微观组织演变 申利权1,2,杨 旗3,靳 丽1,2,董 杰1,2 2195
多向锻造AZ80A 镁合金的静态再结晶行为 姜 俊1,李慧中1,2,3,欧阳杰1,梁霄鹏2,李 轶1,刘楚明1,3 2205
镁/铝合金双金属叠层板的拉深性能 杨 琳,樊 奇,曹晓卿,徐平平,王文先 2213
镁合金新型氟钛酸盐电解液体系微弧氧化电参数的优化 董凯辉1,孙 硕1,宋影伟2,单大勇2 2220
均匀化升温速率对7N01 铝合金组织与力学性能的影响 曾世宝1,2,叶凌英1,2,刘胜胆1,2,邬沛卿1,2,单朝军1,2,邓运来1,2,张新明1,2 2228
2219T87 铝合金焊接接头的常温蠕变行为及其预测 李 壮1,付雪松1,常志龙2,周文龙1,陈国清1 2235
新型超高强铝合金热变形及退火微观组织与织构 陈慧琴1,柏金鑫1,路瑞龙1,林金保2 2243
2219 铝合金稳态蠕变本构方程的建立 尹旭妮,湛利华,赵 俊 2250
淬火弹性应变能对7050 铝合金时效亚晶界演变的影响 顾 伟1,李静媛1,王一德1,卢继延2,周玉焕2 2257
纤维预热温度对真空气压浸渗连续SiCf/Al 复合材料致密度和力学性能的影响 廖焕文,徐志锋,余 欢,王振军 2264
SiC 颗粒强化铜基粉末冶金摩擦材料的表面形貌特征及磨损机理 周海滨,姚萍屏,肖叶龙,张忠义,陈凌寒,贡太敏,赵 林,左晓婷 2272
扩散焊接钨/钢接头残余应力的数值模拟 马运柱,刘昊阳,刘文胜,蔡青山,余 强,刘书华,伍 镭 2280
高硅含量过共晶铝硅合金半固态重熔组织演变 李艳霞1,2,刘俊友3,张巨成1,2,李海凤1 2287
冷却速率对Cu70Zr30 合金初生相及包晶转变的影响 杨 伟1,2,张燕龙1,余 欢1,2,陈寿辉1,卢百平1,汪志太3 2295
TA2 钛材的激光相变硬化复合低温气体渗氮工艺 韩 彬1,付现桥2,曹 宁1,王 勇1 2302
压力对铸造Al-Li-Cu 合金组织和力学性能的影响 范建磊,郑成坤,罗宗强,张卫文 2307
准静态压缩纯钛的微观结构和织构演变 许 峰1,2,张喜燕2,程佑铭2 2315
功能材料
冷型热阻角对HCCM 水平连铸BFe10-1-1 管材周向组织和力学性能均匀性的影响 姜雁斌1,2,刘贤钙1,张小军1,谢建新1,2 2322
粉浆浇注制备大尺寸ITO 靶材工艺 钟景明1,2,3,岳 坤2,孙本双1,3,王东新1,2 2333
铝电解碳素阴极材料在高温和电解状态下的蠕变模型 王 维1,2,逯 峙1,2,谷万铎3 2339
阳极氧化ZrO2 纳米管阵列的制备及其生长机制 曹华珍,尹意淳,郑国渠 2345
新型氮磷添加剂对铜箔轧制摩擦学性能与磨损行为的影响 熊 桑,孙建林 2352
矿业工程 • 冶金工程 • 化学与化工
电流密度对铝电解NiFe2O4 基金属陶瓷惰性阳极腐蚀的影响 田忠良,张 腾,魏琛娟,赖延清,李 劼 2360
硅酸钠对含钙矿物浮选行为的影响及作用机理 张 英1,2,胡岳华3,王毓华3,文书明1,2 2366
氧化铜矿堆浸双重介质分形渗流演化规律 薛振林,吴爱祥,尹升华,刘 超 2373
高硫砷金矿焙砂的硫酸熟化法预处理 杨永斌,曾冠武,李 骞,刘晓亮,姜 涛,刘 波 2380
采用赤铁矿去除高铁闪锌矿浸出液中的铁 杨 凡,邓志敢,魏 昶,李存兄,李兴彬 2387
混凝沉淀法处理钨多金属矿选矿废水 郭朝晖,姜智超,刘亚男,王 硕 2393
采用HBL121 从锌置换渣高浓度硫酸浸出液中萃取回收镓 张魁芳,曹佐英,肖连生,曾 理,张贵清,李青刚 2400
砷化镓真空热分解的理论计算与实验 胡 亮1,2,刘大春1,2,陈秀敏1,2,杨 斌1,2,白平平1,2,段少飞1,2 2410
厌氧颗粒污泥吸附铀(Ⅵ)的特性与机理 陈华柏,谢水波,刘金香,肖拾红,曾涛涛,凌 辉,王劲松 2418
氰化尾渣还原焙烧酸浸提铁及氰化浸金新工艺 郑雅杰,龚 昶,孙召明 2426

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 24    No. 9    September 2014


Structural Materials
Deformation behavior and microstructure transformation of AZ31B Mg alloy under high strain rate compression SHEN Li-quan,YANG Qi,JIN Li,DONG Jie 2195
Static recrystallization behavior of multi-directional forged AZ80A magnesium alloy JIANG Jun,LI Hui-zhongOUYANG Jie ,LIANG Xiao-peng,LI Yi,LIU Chu-ming 2205
Deep drawability of Mg/Al bimetal laminated sheet YANG Lin,FAN Qi,CAO Xiao-qing,XU Ping-ping,WANG Wen-xian 2213
Optimization of electrical parameters of micro-arc oxidation using novel fluotitanate electrolyte on Mg alloys DONG Kai-hui,SUN Shuo,SONG Ying-wei,SHAN Da-yong 2220
Effect of homogenization heating rate on microstructure and mechanical properties of 7N01 aluminum alloy ZENG Shi-bao,YE Ling-ying,LIU Sheng-dan,WU Pei-qing, SHAN Chao-jun,DENG Yun-lai,ZHANG Xin-ming 2228
Creep behavior and forecast of welded joint for 2219T87 aluminum alloy at room temperature LI Zhuang,FU Xue-song,CHANG Zhi-long,ZHOU Wen-long,CHEN Guo-qing 2235
Microstructure and texture of new ultra-strength aluminum alloy during hot deformation and annealing processes CHEN Hui-qin,BAI Jin-xin,LU Rui-long,LIN Jin-bao 2243
Establishment of steady creep constitutive equation of 2219 aluminum alloy YIN Xu-ni,ZHAN Li-hua,ZHAO Jun 2250
Effect of quenching elastic strain energy on evolution of sub-grain boundaries in 7050 Al alloy during aging GU Wei,LI Jing-yuan,WANG Yi-de,LU Ji-yan,ZHOU Yu-huan 2257
Effects of fiber preheating temperature on density and mechanical properties of continuous SiCf/Al composites manufactured by vacuum pressure infiltration LIAO Huan-wen,XU Zhi-feng,YU Huan,WANG Zhen-jun 2264
Topographical characteristics and wear mechanism of copper-based powder metallurgy friction materials reinforced by SiC particle ZHOU Hai-bin,YAO Ping-ping,XIAO Ye-long,ZHANG Zhong-yi, CHEN Ling-han,GONG Tai-min,ZHAO Lin,ZUO Xiao-ting 2272
Numerical simulation of residual stress in tungsten/steel diffusion bonded joints MA Yun-zhu,LIU Hao-yang,LIU Wen-sheng,CAI Qing-shan,YU Qiang,LIU Shu-hua,WU Lei 2280
Microstructure evolution of hypereutectic Al-Si alloy with high Si content during semi-solid remelting LI Yan-xia,LIU Jun-you,ZHANG Ju-cheng,LI Hai-feng 2287
Effects of cooling rate on primary phase and peritectic transformation in Cu70Zr30 alloy YANG Wei,ZHANG Yan-long,YU Huan,CHEN Shou-hui,LU Bai-ping,WANG Zhi-tai 2295
Laser transformation hardening enhanced cryogenic gas nitriding process of TA2 titanium HAN Bin,FU Xian-qiao,CAO Ning,WANG Yong 2302
Effect of pressure on macro-/micro- structures and mechanical properties of Al-Li-Cu cast alloy FAN Jian-lei,ZHENG Cheng-kun,LUO Zong-qiang,ZHANG Wei-wen 2307
Microstructure and texture evolution of pure titanium subjected to quasi-static compression XU Feng,ZHANG Xi-yan,CHENG You-ming 2315
Functional Materials
Influences of thermal-resistance angle of cooling mold on microstructure and mechanical property homogeneity of BFe10-1-1 cupronickel tube produced by HCCM horizontal continuous casting JIANG Yan-bin,LIU Xian-gai,ZHANG Xiao-jun,XIE Jian-xin 2322
Fabrication process of large size ITO target materials by slip casting ZHONG Jing-ming,YUE Kun,SUN Ben-shuang,WANG Dong-xin 2333
Creep model of carbon-based cathode materials for aluminum electrolysis under high temperature and electrolysis conditions WANG Wei,LU Zhi,GU Wan-duo 2339
Preparation and growth mechanism of anodic ZrO2 nanotube arrays CAO Hua-zhen,YIN Yi-chun,ZHENG Guo-qu 2345
Effect of oil additive containing nitrogen and phosphorus on tribology performance and wear behavior of copper foil during rolling XIONG Sang,SUN Jian-lin 2352
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Effect of current density on corrosion of NiFe2O4 based cermet inert anode for aluminum electrolysis TIAN Zhong-liang,ZHANG Teng,WEI Chen-juan,LAI Yan-qing,LI Jie 2360
Effects of sodium silicate on flotation behavior of calcium-bearing minerals and its mechanism ZHANG Ying,HU Yue-hua,WANG Yu-hua,WEN Shu-ming 2366
Evolution rules of dual medium fractal seepage in copper oxide ore heap leaching XUE Zhen-lin,WU Ai-xiang,YIN Sheng-hua,LIU Chao 2373
Pretreatment by sulfuric acid-curing of calcine roasting for gold ores with high sulfur and arsenic contents YANG Yong-bin,ZENG Guan-wu,LI Qian,LIU Xiao-liang,JIANG Tao,LIU Bo 2380
Iron-removal by hematite from leaching liquor of high iron sphalerite YANG Fan,DENG Zhi-gan,WEI Chang,LI Cun-xiong,LI Xing-bin 2387
Coagulation and sedimentation treating wastewater from W containing multi-metal ore dressing process GUO Zhao-hui,JIANG Zhi-chao,LIU Ya-nan,WANG Shuo 2393
Extraction of gallium from high concentration sulfuric acid leaching solution of zinc replacing slag by HBL121 ZHANG Kui-fang,CAO Zuo-ying,XIAO Lian-sheng,ZENG Li,ZHANG Gui-qing,LI Qing-gang 2400
Thermal decomposition of gallium arsenide under vacuum: Theoretical calculation and experiment HU Liang,LIU Da-chun,CHEN Xiu-min,YANG Bin,BAI Ping-ping,DUAN Shao-fei 2410
Characteristics and mechanism of uranium(Ⅵ) absorbed by anaerobic granular sludge CHEN Hua-bai,XIE Shui-bo,LIU Jin-xiang,XIAO Shi-hong,ZENG Tao-tao,LING Hui,WANG Jin-song 2418
New technology of iron extraction and gold recovery from cyanide tailings by cyanide process after reduction roasting and acid leaching ZHENG Ya-jie,GONG Chang,SUN Zhao-ming 2426

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com