Structural Materials |
Effects of Cu addition on microstructure and mechanical properties of as-cast magnesium alloy ZK60 |
Hong-mei ZHU, Cheng-ping LUO, Jiang-wen LIU, Dong-ling JIAO |
605 |
Effect of heat treatment on microstructures and mechanical properties of sand-cast Mg-10Gd-3Y-0.5Zr magnesium alloy |
Liang CAO, Wen-cai LIU, Zhong-quan LI, Guo-hua WU, Lü XIAO, Shao-hua WANG, Wen-jiang DING |
611 |
Hot compression behavior and processing map of cast Mg-4Al-2Sn-Y-Nd alloy |
Jing WANG, Bao-liang SHI, Yuan-sheng YANG |
626 |
Creep mechanism and creep constitutive model of aluminum silicate short-fiber-reinforced magnesium matrix composite |
Jun TIAN, Zi-qiong SHI |
632 |
Strengthening contributions in ultra-high strength cryorolled Al-4%Cu-3%TiB2 in situ composite |
N. NAGA KRISHNA, K. SIVAPRASAD, P. SUSILA |
641 |
High-cycle fatigue behavior of friction stir butt welded 6061 aluminium alloy |
Hrishikesh DAS, Debayan CHAKRABORTY, Tapan KUMAR PAL |
648 |
Effect of welding sequence on residual stress in thin-walled octagonal pipe-plate structure |
Ding-fa FU, Chang-qing ZHOU, Can LI, Guan WANG, Luo-xing LI |
657 |
Effect of superheat and solidified layer on achieving good metallic bond between A390/A356 alloys fabricated by cast-decant-cast process |
M. MOHAMMADI RAHVARD, M. TAMIZIFAR, M. A. BOUTORABI, S. GHOLAMI SHIRI |
665 |
Anomalous yield and intermediate temperature brittleness behaviors of directionally solidified nickel-based superalloy |
Li-yuan SHENG, Fang YANG, Jian-ting GUO, Ting-fei XI |
673 |
Microstructure characterization and mechanical properties of TC4-DT titanium alloy after thermomechanical treatment |
Xiao-na PENG, Hong-zhen GUO, Zhi-feng SHI, Chun QIN, Zhang-long ZHAO |
682 |
Effect of wet shot peening on Ti-6Al-4V alloy treated by ceramic beads |
Guo-qing CHEN, Yan JIAO, Tang-yong TIAN, Xin-hua ZHANG, Zhi-qiang LI, Wen-long ZHOU |
690 |
Effect of heat treatment on microstructure and mechanical property of Ti-steel explosive-rolling clad plate |
Hai-tao JIANG, Xiao-qian YAN, Ji-xiong LIU, Xiao-ge DUAN |
697 |
Functional Materials |
Effect of Ce,Co,B on formation of LaCo13-structure phase in La(Fe,Si)13 alloys |
Xiang CHEN, Yun-gui CHEN, Yong-bai TANG, Ding-quan XIAO |
705 |
Fe75Zr3Si13B9 magnetic materials prepared by spark plasma sintering |
Xing-hua WANG, Ge WANG, Yu-ying ZHU, Jin-feng BAO, Xiong-fei DU, Qiang LI |
712 |
Effects of alcohol additives on pore structure and morphology of freeze-cast ceramics |
Jing ZENG, Yan ZHANG, Ke-chao ZHOU, Dou ZHANG |
718 |
Effect of vinylene carbonate as electrolyte additive on cycling performance of LiFePO4/graphite cell at elevated temperature |
Hai-shen SONG, Zheng CAO, Zhi-an ZHANG, Yan-qing LAI, Jie LI, Ye-xiang LIU |
723 |
Crystallization kinetics and temperature dependence of energy storage properties of niobate glass-ceramics |
Tao-yong LIU, Guo-hua CHEN, Jun SONG, Chang-lai YUAN |
729 |
Effect of annealing treatment on morphologies and gas sensing properties of ZnO nanorods |
Jian-jiao ZHANG, Er-jun GUO, Li-ping WANG, Hong-yan YUE, Guo-jian CAO, Liang SONG |
736 |
Photocatalytic degradation and inactivation of Escherichia coli by ZnO/ZnAl2O4 with heteronanostructures |
Li ZHANG, Jian-hui YAN, Min-jie ZHOU, Yan-ping YU, Ye LIU, You-nian LIU |
743 |
Size control and its mechanism of SnAg nanoparticles |
Wei-peng ZHANG, Chang-dong ZOU, Bing-ge ZHAO, Qi-jie ZHAI, Yu-lai GAO |
750 |
Preparation and characterization of diamond film on Cu substrate using Cu-diamond composite interlayer |
Wan-qi QIU, Zhi-gang HU, Zhong-wu LIU, De-chang ZENG, Ke-song ZHOU |
758 |
Effect of electron beam irradiation on multi-walled carbon nanotubes |
Bin LI, Yi FENG, Ke-wang DING, Gang QIAN, Xue-bin ZHANG, Yan-fang LIU |
764 |
Effect of normalizing cooling process on microstructure and precipitates in low-temperature silicon steel |
Hui LI, Yun-li FENG, Meng SONG, Jing-long LIANG, Da-qiang CANG |
770 |
Computational Materials Science and Numerical Modelling |
Isothermal section of Mg-Nd-Gd ternary system at 723 K |
Long XIAO, Yan ZHONG, Cui-ping CHEN, Ming-ming WULIU, Tian-kuang LUO, Li-bin LIU, Kui LIN |
777 |
Thermodynamic consistent phase field model for sintering process with multiphase powders |
Rui-jie ZHANG, Zhong-wei CHEN, Wei FANG, Xuan-hui QU |
783 |
New numerical algorithm of gas-liquid two-phase flow considering characteristics of liquid metal during mold filling |
Xiao-feng NIU, Zhao FANG, Wei LIANG, Hua HOU, Hong-xia WANG |
790 |
High-temperature flow behavior modeling of 2099 alloy considering strain effects |
Fei ZHANG, Jian SHEN, Xiao-dong YAN, Jian-lin SUN, Xiao-long SUN, Yin YANG, Yong LIU |
798 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Fracture evolution around pre-existing cylindrical cavities in brittle rocks under uniaxial compression |
Xing-dong ZHAO, Hong-xun ZHANG, Wan-cheng ZHU |
806 |
Development of multi-channel observation and inversion for IP electrical sounding method |
Hai-fei LIU, Jian-xin LIU, Rong-wen GUO, Xiao-zhong TONG, Lu GONG, Yan-hua PENG |
816 |
Generalized functional model of maximum and minimum detectable deformation gradient for PALSAR interferometry |
Qi-jie WANG, Zhi-wei LI, Ya-nan DU, Rong-an XIE, Xin-qing ZHANG, Mi JIANG, Jian-jun ZHU |
824 |
3D characterization and analysis of pore structure of packed ore particle beds based on computed tomography images |
Bao-hua YANG, Ai-xiang WU, Xiu-xiu MIAO, Jin-zhi LIU |
833 |
Kinetics of extracting magnesium from mixture of calcined magnesite and calcined dolomite by vacuum aluminothermic reduction |
Da-xue FU, Nai-xiang FENG, Yao-wu WANG, Jian-ping PENG, Yue-zhong DI |
839 |
Reaction kinetics of roasting high-titanium slag with concentrated sulfuric acid |
Li-li SUI, Yu-chun ZHAI |
848 |
Preparation of Na specific absorbent and application of sodium removal from ammonium tungstate solution |
Zhong-wei ZHAO, Mao-feng YANG, Li-hua HE, Jia-liang ZHANG, Xing-yu CHEN, Xu-heng LIU |
854 |
Reductive leaching of manganese oxide ores using waste tea as reductant in sulfuric acid solution |
Qing TANG, Hong ZHONG, Shuai WANG, Jin-zhong LI, Guang-yi LIU |
861 |
Kinetics and equilibrium adsorption of copper(II) and nickel(II) ions from aqueous solution using sawdust xanthate modified with ethanediamine |
Lu XIA, Yi-xu HU, Bo-han ZHANG |
868 |
Electrochemical reduction process of Co(II) in citrate solution |
Yan LIU, Zhe-jun LI, Yi-cheng WANG, Wei WANG |
876 |
Morphological and crystallographic characteristics of lead powder obtained by electrodeposition from an environmentally friendly electrolyte |
Neboj?a D. NIKOLI?, Djendji Dj. VA?TAG, Vesna M. MAKSIMOVI?, Goran BRANKOVI? |
884 |
Anodic behavior and microstructure of Al/Pb-Ag anode during zinc electrowinning |
Yong-chun ZHANG, Bu-ming CHEN, Hai-tao YANG, Zhong-cheng GUO, Rui-dong XU |
893 |
Solid-phase sintering process and forced convective heat transfer performance of porous-structured micro-channels |
Peng-fei BAI, Zi-chuan YI, Biao TANG, Guo-fu ZHOU |
900 |