Structural Materials |
Fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy |
Jing ZHONG, Shen ZHONG, Zi-qiao ZHENG, Hai-feng ZHANG, Xian-fu LUO |
303 |
Microstructure of Mg-8Zn-4Al-1Ca aged alloy |
Yun DONG, Xiao-ping LIN, Jie YE, Run-guo ZHENG, Na HE |
310 |
Growth twinning behavior of cast Mg-Zn-Cu-Zr alloys |
Hong-mei ZHU,Cheng-ping LUO, Jiang-wen LIU,Dong-ling JIAO |
316 |
Effect of process parameters on microstructure and properties of AM50A magnesium alloy parts formed by double control forming |
Ju-fu JIANG, Ying WANG, Jian-jun QU |
321 |
Damping properties of as-cast Mg-xLi-1Al alloys with different phase composition |
Jing-feng WANG, Dan-dan XU, Ruo-peng LU, Fu-sheng PAN |
334 |
Effect of carbon addition on carbide morphology of single crystal Ni-based superalloy |
Zhu-huan YU, Lin LIU, Jun ZHANG |
339 |
Effect of NiAl content on phases and microstructures of TiC-TiB2-NiAl composites fabricated by reaction synthesis |
Hong-zhi CUI, Li MA, Li-li CAO, Fang-lei TENG, Ning CUI |
346 |
Superlubricity behaviors of Nitinol 60 alloy under oil lubrication |
Qun-feng ZENG, Guang-neng DONG |
354 |
Fretting wear behavior of Inconel 690 in hydrazine environments |
Xiao-yu ZHANG, Ping-di REN, Jin-fang PENG, Min-hao ZHU |
360 |
Texture of friction stir welded Ti-6Al-4V alloy |
Li ZHOU, Hui-jie LIU, Lin-zhi WU |
368 |
Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy |
G. SELVAKUMAR, G. SORNALATHA, S. SARKAR, S. MITRA |
373 |
Structural and mechanical properties of CuZr/AlN nanocomposites |
Man GU, Yu-cheng WU, Ming-hua JIAO, Xin-min HUANG |
380 |
Functional Materials |
Casting effect on compressive brittleness of bulk metallic glass |
Hong WU, Yong LIU, Kai-yang LI, Zhong-wei ZHAO |
385 |
Preparation and characterization of Ce1-xDyx-ySryO2-δ system |
S. RAMESH, K. C. JAMES RAJU, C. VISHNUVARDHAN REDDY |
393 |
In situ formation of RE2S3 and RE2O2S phases on sinter skin of Cr–mischmetal co-doped WC-Co alloy |
Li Zhang, Yu-ping FENG, Shu Chen, Hou-ping Wu |
401 |
Structures and electrochemical hydrogen storage performance of Si added A2B7-type alloy electrodes |
Yang-huan ZHANG, Hui-ping REN, Ying CAI, Tai YANG, Guo-fang ZHANG, Dong-liang ZHAO |
406 |
Electrochemical behavior and cyclic fading mechanism of LiNi0.5Mn0.5O2 electrode in LiNO3 electrolyte |
Hai-yan WANG, Han-na HE, Nan ZHOU, Guan-hua JIN, You-gen TANG |
415 |
Influence of Al-Mn master alloys on microstructures and electrochemical properties of Mg-Al-Pb-Mn alloys |
Bin CHEN, Ri-chu WANG, Chao-qun PENG, Yan FENG, Nai-guang WANG |
423 |
Properties improvement and microstructure changes during thermomechanical treatment in sintered Cu-Au alloy |
Ivana MARKOVIC, Svetlana NESTOROVIC, Desimir MARKOVIC, Dragoslav GUSKOVIC |
431 |
A gradient nano/micro-structured surface layer on copper induced by severe plasticity roller burnishing |
Jing ZHAO, Wei XIA, Ning LI, Feng-lei LI |
441 |
Effects of slurry pack cementation temperature on microstructure and wear resistance of Ti-Al co-deposited coating on copper plated nickel layer |
Hong-xing WANG, Yan ZHANG, Shao-feng YANG, Bing-yi LIU |
449 |
Influence of heat-treatment on oxidation-resistance of phosphate-coating for C/C composite |
Yi-cheng GE, Ling-yun YANG, Shuai WU, Chan LI, Jian LUO, Mao-zhong YI |
455 |
Computational Materials Science and Numerical Modelling |
Numerical analysis of coupled finite element with element-free Galerkin in sheet flexible-die forming |
Zhong-jin WANG, Bin-xian YUAN |
462 |
Establishment of size-dependant constitutive model of micro-sheet metal materials |
Xiao-juan LIN, Guang-chun WANG, Wei ZHENG, Hua JIANG, Jin LI |
470 |
Three-dimensional modeling of effect of surface intermetallic phase on surface defects of Al-Fe-Si aluminum foils during twin-roll casting |
Yuan-zhi ZHU, Qiang WAN, Bing-liang LI, Feng ZHOU, Ya-feng ZHANG |
477 |
Simulated and experimental investigation of stretch sheet forming of commercial AA1200 aluminum alloy |
Reza ESMAEILIZADEH, Kourosh KHALILI, Bagher MOHAMMADSADEGHI, Hossein ARABI |
484 |
Density functional theory study on natural hydrophobicity of sulfide surfaces |
Cui-hua ZHAO, Jian-hua CHEN, Bo-zeng WU, Xian-hao LONG |
491 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Thermal-hydro-mechanical coupling stress intensity factor of brittle rock |
Peng LI, Qiu-hua RAO, Zhuo LI, Jing JING |
499 |
Three-dimensional magnetotelluric regularized inversion based on smoothness-constrained model |
Xiao-zhong TONG, Jian-xin LIU, Rong-wen GUO, Hai-fei LIU, Lu GONG |
509 |
Monitoring large-area mining subsidence by GNSS based on IGS stations |
He-fang BIAN, Shu-bi ZHANG, Qiu-zhao ZHANG, Nan-shan ZHENG |
514 |
Collision and attachment behavior between fine cassiterite particles and H2 bubbles |
Liu-yi REN, Yi-min ZHANG, Wen-qing QIN, Shen-xu BAO, Jun WANG |
520 |
Loose-stratification model in separation process for vanadium pre-concentration from stone coal |
Yun-liang ZHAO, Yi-min ZHANG, Shen-xu BAO, Tao LIU, Ying BIAN, Mou-feng JIANG, Xiang LIU |
528 |
Leaching kinetics of selenium from selenium-tellurium-rich materials in sodium sulfite solutions |
Ya-jie ZHENG, Kun-kun CHEN |
536 |
Silver removal from molten lead through zinc powder injection |
V. H. GUTIéRREZ-PéREZ, A. CRUZ-RAMíREZ, M. VARGAS-RAMíREZ, E. PALACIOS-BEAS, R. G. SáNCHEZ-ALVARADO |
544 |
Valence states, impurities and electrocrystallization behaviors during molten salt electrorefining for preparation of high-purity titanium powder from sponge titanium |
Qi-gang WENG, Rui-di LI, Tie-chui YUAN, Jian LI, Yue-hui HE |
553 |
Magnesium vapor nucleation in phase transitions and condensation under vacuum conditions |
Cheng-bo YANG, Yang TIAN,Tao QU,Bin YANG, Bao-qiang XU, Yong-nian DAI |
561 |
Galvanic corrosion behavior of copper/titanium galvanic couple in artificial seawater |
Xiao-qing DU, Qing-song YANG, Yu CHEN, Yang YANG, Zhao ZHANG |
570 |
On-line detection of Cu (II) in bioleaching system by anodic stripping differential pulse voltammetry |
Yan JIN, Miao CHEN, Qing-hui JIN, Jian-long ZHAO |
582 |
Chemical fractionation method for characterization of biomass-based bottom and fly ash fractions from large-sized power plant of an integrated pulp and paper mill complex |
Risto P?YKI?, Hannu NURMESNIEMI, Olli DAHL, Mikko M?KEL? |
588 |
Applications of nonferrous metal price volatility to prediction of China’s stock market |
Die-feng PENG, Jian-xin WANG, Yu-lei RAO |
597 |