| Structural Materials |
| Directional solidification and characterization of NiAl-9Mo eutectic alloy |
Jian-fei ZHANG, Jun SHEN, Zhao SHANG, Lei WANG, Heng-zhi FU |
3499 |
| Morphology development of elongated α phases in hot working of large-scale titanium alloy plate |
Xiao-guang FAN, He YANG, Peng-fei GAO, Si-liang YAN |
3508 |
| Microstructure and mechanical properties of cast and heat treated Ti-6.55Al-3.41Mo-1.77Zr alloy |
Khaled M. IBRAHIM, Abdel Moty M. EL-HAKEEM, Ramadan N. ELSHAER |
3517 |
| Influence of FSW parameters on formation quality and mechanical properties of Al 2024-T351 butt welded joints |
I. RADISAVLJEVIC, A. ZIVKOVIC, N. RADOVIC, V. GRABULOV |
3525 |
| Effects of heat treatment on microstructure and microhardness of linear friction welded dissimilar Ti alloys |
Chuan-chen ZHANG, Tian-cang ZHANG, Ya-juan JI, Ji-hua HUANG |
3540 |
| Microstructure evolution of Al-Ti liquid-solid interface |
Shu-ying JIANG, Shi-chun LI, Lei ZHANG |
3545 |
| Intermetallic phase evolution of 5059 aluminum alloy during homogenization |
Hai-chun JIANG, Ling-ying YE, Xin-ming ZHANG, Gang GU, Pan ZHANG, Yu-long WU |
3553 |
| Kinetic nucleation of primary a(Al) dendrites in Al-7%Si-Mg cast alloys with Ce and Sr additions |
Zhong-wei CHEN, Xiao-lei HAO, Jing ZHAO, Cui-ying MA |
3561 |
| Microstructural evolution of Al-Zn-Mg-Zr alloy with trace amount of Sc during homogenization treatment |
Bo LI, Qing-lin PAN, Yun-jia SHI, Chen LI, Zhi-min YIN |
3568 |
| Influence of forging and heat treatment on wear properties of Al-Si and Al-Pb bearing alloys in oil lubricated conditions |
Erol FEYZULLAHO？LU, Alpay Tamer ERTüRK, Ersin Asim GüVEN |
3575 |
| Effect of heat treatment on microstructure and thermophysical properties of diamond/2024 Al composites |
Zi-yang XIU, Xu WANG, M. HUSSAIN, Chao FENG, Long-tao JIANG |
3584 |
| Microstructure evolution of semi-solid 7075 Al alloy slurry during temperature homogenization treatment |
Bin YANG, Wei-min MAO, Xiao-jun SONG |
3592 |
| Microstructure and mechanical properties of Mg94Zn2Y4 extruded alloy with long-period stacking ordered structure |
Huan LIU, Feng XUE, Jing BAI, Jian ZHOU, Yang-shan SUN |
3598 |
| Microstructure and mechanical properties of as-cast Mg-Sn-Ca alloys and effect of alloying elements |
K. SURESH, K.P. RAO, Y.V.R.K. PRASAD, N. HORT, K.U. KAINER |
3604 |
| Influence of heat treatment on microstructures and mechanical properties of gravity cast Mg-4.2Zn-1.5RE-0.7Zr magnesium alloy |
Ying-dong WANG, Guo-hua WU, Wen-cai LIU, Song PANG, Yang ZHANG, Wen-jiang DING |
3611 |
| Microstructure evolution and mechanical properties of ZK60 magnesium alloy produced by SSTT and RAP route in semi-solid state |
Chang-peng WANG, Ying-ying ZHANG, Di-fan LI, Hua-sheng MEI, Wei ZHANG, Jie LIU |
3621 |
| Functional Materials |
| Growing process and reaction mechanism of electroless Ni-Mo-P film on SiO2 substrate |
Mei-ling WANG, Zhi-gang YANG, Chi ZHANG, Dian-long LIU |
3629 |
| Effects of TiC addition on properties of laser particle deposited WC-Co-Cr and WC-Ni coatings |
B. A. OBADELE, P. A. OLUBAMBI, O. T. JOHNSON |
3634 |
| Effect of Zn and Ti mole ratio on microstructure and photocatalytic properties of magnetron sputtered TiO2-ZnO heterogeneous composite film |
Li-jing BAI, Gang KOU, Zhen-yao GONG, Zhi-ming ZHAO |
3643 |
| Effect of chemical plating Zn on DC-etching behavior of Al foil in HCl-H2SO4 |
Chao-lei BAN, Ye-dong HE, Xin SHAO, Juan DU, Li-ping WANG |
3650 |
| Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy |
Shu-yong JIANG, Ya-nan ZHAO, Yan-qiu ZHANG, Li HU, Yu-long LIANG |
3658 |
| Effect of Nd content on electrochemical performances of nanocrystalline and amorphous (Mg24Ni10Cu2)100-xNdx (x=0-20) alloys prepared by melt spinning |
Yang-huan ZHANG, Tai YANG, Wen-gang BU, Ying CAI, Guo-fang ZHANG, Dong-liang ZHAO |
3668 |
| Microstructure and hydrogenation kinetics of Mg2Ni-based alloys with addition of Nd, Zn and Ti |
Wen-jie SONG, Jin-shan LI, Tie-bang ZHANG, Xiao-jiang HOU, Hong-chao KOU, Xiang-yi XUE, Rui HU |
3677 |
| Preparation and performance of hierarchically porous carbons as oxygen electrodes for lithium oxygen batteries |
Yun-feng SONG, Xian-you WANG, Yan-song BAI, Hao WANG, Ben-an HU, Hong-bo SHU, Xiu-kang YANG, Lan-hua YI, Bo-wei JU, Xiao-yan ZHANG |
3685 |
| Synthesis of Cu2O/reduced graphene oxide composites as anode materials for lithium ion batteries |
Guo-chun YAN, Xin-hai LI, Zhi-xing WANG, Hua-jun GUO,Qian ZHANG, Wen-jie PENG |
3691 |
| Effects of alloying and deformation on microstructures and properties of Cu-Mg-Te-Y alloys |
Liang CHEN, Bing-wen ZHOU, Jian-ning HAN, Yan-yan XUE, Fei JIA, Xing-guo ZHANG |
3697 |
| Computational Materials Science and Numerical Modelling |
| Linear correlations of formation enthalpies/bulk modules and atomic volumes observed in Pt-Zr compounds by ab initio calculation |
Xue BAI, Jia-hao LI, Ye DAI, Bai-xin LIU |
3704 |
| Elastic and thermodynamic properties of Re2N at high pressure and high temperature |
Mei-guang ZHANG, Hai-yan YAN, Qun WEI, Duo-hui HUANG |
3714 |
| Effect of liquid diffusion coefficients on microstructure evolution during solidification of Al356.1 alloy |
Wei-hua SUN, Li-jun ZHANG, Ming WEI, Yong DU, Bai-yun HUANG |
3722 |
| Deformation mechanism of cold ring rolling in view of texture evolution predicted by a newly proposed polycrystal plasticity model |
Hong-wei LI, Lu FENG, He YANG |
3729 |
| A method for prediction of unstable deformation in hot forging process by simulation |
Shi-qiang LU, Xin LI, Ke-lu WANG, Shi-biao LIU, M. W. FU |
3739 |
| Analysis of high-power disk laser welding stability based on classification of plume and spatter characteristics |
Xiang-dong GAO, Qian WEN, Seiji KATAYAMA |
3748 |
| Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
| Bioleaching of Pb-Zn-Sn chalcopyrite concentrate in tank bioreactor and microbial community succession analysis |
Jun WANG, Hong-bo ZHAO, Tian ZHUANG, Wen-qing QIN, Shan ZHU, Guan-zhou QIU |
3758 |
| Bioleaching of sphalerite sample from Kooshk lead-zinc tailing dam |
J. V. MEHRABANI, S. Z. SHAFAEI, M. NOAPARAST, S. M. MOUSAVI, M. M. RAJAEI |
3763 |
| Water leaching kinetics and recovery of potassium salt from sintering dust |
Guang ZHAN, Zhan-cheng GUO |
3770 |
| Atmospheric oxygen-rich direct leaching behavior of zinc sulphide concentrate |
Zhi-feng XU, Qing-zheng JIANG, Cheng-yan WANG |
3780 |
| Electrical conductivity of NaF-AlF3-CaF2-Al2O3-ZrO2 molten salts |
Morigengaowa BAO, Zhao-wen WANG, Bing-liang GAO, Zhong-ning SHI, Xian-wei HU, Jiang-yu YU |
3788 |
| A method for calculation of ion distribution in reaction system forming hydroxide |
Zhe-nan JIN, Dae-rok JONG, Jong-su HONG, Yong-hun JONG, Dian-kun LU, Guo-bao CHEN |
3793 |
| Furnace structure analysis for copper flash continuous smelting based on numerical simulation |
Jin-liang WANG, Ya-zhou CHEN, Wen-hai ZHANG, Chuan-fu ZHANG |
3799 |
| Thermodynamics and kinetics of carbothermal reduction of zinc ferrite by microwave heating |
Xin WANG, Da-jin YANG, Shao-hua JU, Jin-hui PENG, Xin-hui DUAN |
3808 |
| Corrosion of NiFe2O4-10NiO-based cermet inert anodes for aluminium electrolysis |
Han-bing HE, Yuan WANG, Jia-ju LONG, Zhao-hui CHEN |
3816 |
| Cyanide-free silver electroplating process in thiosulfate bath and microstructure analysis of Ag coatings |
Feng-zhang REN, Li-tao YIN, Shan-shan WANG, A. A. VOLINSKY, Bao-hong TIAN |
3822 |
| Electrochemical behaviour of Ti alloys containing Mo and Ta as β-stabilizer elements for dental application |
Daniel MARECI, Romeu CHELARIU, Georgiana BOLAT, Adrian CAILEAN, Viorel GRANCEA, Daniel SUTIMAN |
3829 |
