Structural Materials |
Effect of pre-aging temperature and retrogression heating rate on microstructure and properties of 7150 alloy |
FENG Di, ZHANG Xin-ming, LIU Sheng-dan, CHEN Qi |
1173 |
Preparation of super high strength bulk nanocrystalline Al by cryomilling |
LI Jiong-li, LI Sha-sha, FAN Zhen-zhong, LI Wei, XIONG Yan-cai |
1182 |
Calculation of liquid phase diffusion coefficient in microstructure simulation of Al-2%Cu binary alloy |
BU Xiao-bing, LI Luo-xing, ZHANG Li-qiang, ZHU Bi-wu, XU Rong, WANG Shui-ping |
1189 |
Microstructure and mechanical properties of Al-5.0Cu-0.6Mn-0.5Fe alloy prepared by squeeze casting |
LIN Bo, ZHANG Wei-wen, CHENG Pei, WANG Xian-song, LI Yuan-yuan |
1195 |
Effect of annealing temperature on microstructure and mechanical properties of Cu/Al clad sheet fabricated by asymmetrical roll bonding |
LI Xiao-bing, ZU Guo-yin, WANG Ping |
1202 |
Corrosion behavior of 2024-T3 aluminum alloy in simulated marine atmospheric environment |
LIU Yan-jie, WANG Zhen-yao, KE Wei |
1208 |
Effect of modification and alloying on microstructure and wear properties of hypereutectic Al-20%Si alloy |
YANG Zi-run, PANG Shao-ping, SUN Yu, SONG Juan |
1217 |
Relationship between atomic bonding and property of Al-Mg-Si alloy |
GAO Ying-jun, CHEN Hao-tian, ZHU Tian-xia, ZHANG Shuang, HUANG Chuang-gao |
1226 |
Effect of retrogression cooling rate on mechanical properties and resistance to intergranular corrosion of 7050 aluminum alloy |
LI Guo-feng, ZHANG Xin-ming |
1234 |
Microstructural evolution and deformation mechanism during creep of Al2O3-SiO2(sf)/AZ91D composite |
TIAN Jun, SHI Zi-qiong, ZHONG Shou-yan, LIAO Zi-long |
1241 |
Microstructure evolution of intermetallic layer of hot dip aluminized ductile cast iron |
CHEN Jiang, ZHAO Jun-wen, HUANG Xing-min, CHENG Qian, HAN Jing, ZHANG Kun, DAI Guang-ze |
1248 |
Microstructure and properties of transient liquid-phase diffusion bonded joint of AZ31B/Cu dissimilar metal |
DU Shuang-ming, LIU Gang, WANG Ming-jing |
1255 |
Coarse-grain bulk WC composites prepared by direct current arc in-situ metallurgy |
CHI Jing, LI Hui-qi, WANG Shu-feng, LI Min, LI Jian-nan, WANG Mei, GAO Xu-jie |
1262 |
Influence of grain boundary sliding on ductility-dip cracking of Ni-based alloy |
CUI Wei, CHEN Jing-qing, LU Hao, CHEN Jun-mei |
1269 |
Forming process of in-situ growing CNTs/CFF/EP lamellar composites |
REN Chong, WANG Te, GONG Qian-ming, LIANG Ji |
1275 |
Electron theory investigation on broken bonds during atomic dissolution at solid-state reaction interface of CuTi2 |
LI Yan-ju, CHEN Yong-chong, ZHANG Xi-feng, REN Ya-kun, ZHANG Yan-ping, WANG Qiu-ping, DU Zhi-wei |
1282 |
Effect of small amount of Ce addition on microstructure and mechanical properties of high-boron high speed steel |
WU Zhong-jia, CHEN Zhi-guo, XIANG Yong, WEI Xiang, ZHANG Ji-shuai |
1289 |
Warm deformation behavior of new kind of metastable β titanium alloy Ti2448 and its constitute model |
WANG Zhe-jun, QIANG Hong-fu, WANG Xue-ren |
1295 |
Effect of aging process on microstructure and superelasticity of Ti-Ni-V shape memory alloy |
HE Zhi-rong, LIU Man-qian, WANG Fang, ZHANG Yong-hong, WANG Yong-shan |
1301 |
Functional Materials |
Effects of heat treatments on microstructures and mechanical properties of spray-deposited Al-27%Si alloy |
LIU Wen-shui, WANG Ri-chu, PENG Chao-qun, MO Jing-yi, ZHU Xue-wei, PENG Jian, MA Ru-long |
1307 |
Preparation and properties of Al62Cu25.5Fe12.5 quasicrystal powder as grinding material |
CHEN Qian-bao, WANG Yan-bin, QIANG Jian-bing, CHEN Hua, WANG Ying-min, WANG Qing, DONG Chuang |
1315 |
Application characteristics of Pb-alloy porous anode in copper powder electrowinning |
YU Xiao-ying, LI Yan-hong, JIANG Liang-xing, LAI Yan-qing, LI Jie, LIU Ye-xiang |
1323 |
Microstructure and properties of Cu-Mg alloys processed by ECAP and subsequent annealing |
ZHU Cheng-cheng, MA Ai-bin, JIANG Jing-hua, SONG Dan, LI Xue-bin, CHEN Jian-qing |
1331 |
Cyclic oxidation and interdiffusion behavior of Ru/NiAlHf coating on Ni-based single crystal superalloy |
ZHAO Qing, PENG Hui, GUO Hong-bo, GONG Sheng-Kai, XU Hui-bin |
1338 |
Preparation and electrochemical determination of gold electrode modified with thiolated capture probe through self-assembling |
LI Yuan-ping, ZENG Guang-ming, TANG Lin, CHEN Yao-ning, ZHANG Yi, LIU Can, LI Zhen, PANG Ya |
1345 |
Structure and electrochemical performance of Fe3+-doped Li4Ti5O12 |
SONG Liu-bin, LI Xin-hai, WANG Zhi-xing, GUO Hua-jun, XIAO Zhong-liang, TANG Zhao-hui |
1351 |
Effect of catalysts on dehydrogenation of LiAlH4+MgH2 composite and catalytic mechanism |
DING Xiang-qian, ZHU Yun-feng, WEI Ling-jun, HUAN Qing-qing, LI Li-quan |
1356 |
Preparation and electromagnetic property of carbon encapsulated Ni nanoparticles /polyaniline composite |
AN Yu-liang, YUAN Xia, SUI Hong-chao, ZHENG Zhao-hui |
1362 |
Research progress on fixed diamond wire saw |
Wang Mei-juan, Wang Ri-chu, Peng Chao-qun, Feng Yan, Zhang Chun |
1368 |
Synthesis and characterization of CulnS2 micro-particles synthesized by aqueous synthesis method and its process optimization |
I Shao-wen, ZHOU Ji-cheng, YOU Liang |
1380 |
Electrochemical behavior of copper passivated by MBT and HQ in 3.5%NaCl solution |
HE Tian, TAN Cheng-yu, TANG Juan, ZHENG Yong |
1388 |
Effects of nitrogen and yttrium on structure and properties of Y-Ca-Si-Al-O-N oxynitride glasses |
LUO Zhi-wei, QU Gao, LIU Xue-feng, CHEN Xing-jun, LU An-xian |
1396 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Metallogenic geological characteristics and targets optimization of copper deposit in Eastern Kunlun, Qinghai Province, China |
ZHANG Pu-bing, ZHANG Yu, YANG Zi-an, LIU Zhong-fa, ZHANG Jian-guo, SHI Fei-fei, WANG Juan |
1405 |
Geochemical features and petrogenesis of granites from Tianshui—Dangchuan area in West Qinling orogenic belt, China |
XIN Yu-jia, HUANG De-zhi, WANG Xian-ying, LIU Zhen |
1417 |
Prediction of blasting-vibration-peak-speed by QN-BP based on Quasi-Newton method |
LIU Bo, SHI Xiu-zhi, HUANG Xuan-dong, WU Yong-meng, HUANG Dan, LUO Jia |
1427 |
Effects of different iodides on gold concentrates leaching process in iodine-iodide solution |
LI Shao-ying, WANG Hai-xia, SUN Chun-bao, ZHAO Liu-cheng, YAN Zhi-qinag |
1434 |
Action mechanism and phase transformation characteristics of garnierite in drying process |
LI Bo, WEI Yong-gang, WANG Hua |
1440 |
Sodium nitrite induced mutagenesis of bacteria and bioleaching silicon from bauxite |
ZHONG Chan-juan, SUN De-si, WANG Hua-jun, ZHANG Qiang |
1447 |
In(Ⅲ) enrichment with combining hollow fiber supported liquid membrane and ultra-filtration process |
FENG Hai-bo, JIA Yue, Lü Xiao-long, LIU Wei, SU Ye |
1457 |
Thermodynamic analysis for separation of tungsten and molybdenum in W-Mo-H2O system |
ZHANG Jia-liang, ZHAO Zhong-wei, CHEN Xin-yu, LIU Xu-heng |
1463 |
Optimization analysis of lance structure parameters in oxygen enriched bottom-blown furnace |
ZHANG Zhen-yang, YAN Hong-jie, LIU Fang-kan, WANG Ji-min |
1471 |