Structural Materials |
Effects of rolling technology on forming properties of AZ31 magnesium alloy sheets at room temperature |
LIU Hua-qiang, TANG Di, HU Shui-ping, MI Zhen-li, WANG Zhe |
3293 |
Effect of residual constituents on intergranular corrosion behavior of Al-Mg-Si-Cu alloy |
LI Hai, MENG Lin, WANG Zhi-xiu, HUANG Ling, LI Wei, SONG Ren-guo, ZHENG Zi-qiao |
3300 |
Microstructure and characteristics of joint of electron beam welds of 2A14 aluminum alloy |
WANG Ya-rong, TENG Wen-hua, YU Yang, FAN Ya-li |
3307 |
Fatigue crack propagation characteristics of high strength aluminum alloy welded joint used by high speed train |
YAN De-jun, LIU Xue-song, FANG Hong-yuan, ZHAO Hua-sheng, PENG Ai-lin, YANG Jian-guo, ZHANG Jian |
3313 |
ModeⅠstress intensity factor calculation of elliptical cracks in aluminum alloy thick plates considering quenching residual stress |
DING Hua-feng, ZHU Cai-chao, LI Da-feng, DU Xue-song, LIU Ming-yong |
3320 |
Effect of contact load on dual-rotary fretting tribological behavior of 7075 aluminum alloy |
Shen Ming-xue, Yang sha, Zhou Yan, Cai Zhen-bing, Zhu Min-hao |
3327 |
Numerical simulation of cavity-filling procedures for micro-pin-fin array thixoforming with semi-solid A356 aluminium alloy |
TANG Pei, MEI De-qing, YAO Zhe-he, CHEN Zi-chen |
3334 |
Experimental study and numerical simulation of warm stamping of 5182 aluminum alloy for automotive body |
CHEN Jie-er, WANG Meng-jun, YANG Gang, ZHOU Wei, LI Guang-yao |
3342 |
Effect of Cu content on microstructures and properties of Al-Mg-Si-Cu alloys |
WANG Zhi-xiu, LI Hai, GU Jian-hua, SONG Ren-guo, ZHENG Zi-qiao |
3348 |
Site preference of N and N-induced embrittlement at γ-Ni/γ′-Ni3Al interface |
PENG Li, LIU Yun-guo, DU Fu-ming, WEN Da-dong, HUANG Li-qun, PENG Ping |
3356 |
Microstructures and properties of YG8 coating on 0Cr13Ni5Mo cast steel fabricated by electro-spark deposition |
ZHANG Rui-zhu, GUO Peng, WANG Jian-sheng, YAN Da-kao, LI Jing-rui |
3366 |
Effect of solution treatment on microstructure and mechanical properties of quasi eutectic Al-Si alloy |
SHI Lei, WANG You-qi, WANG Ying, SU Hui, ZHEN Li-ling |
3372 |
Composition design of Ti-Mo-Nb-Zr-Sn BCC solid solution alloys with low elastic modulus and low Nb content |
LIU En-xue, WANG Qing, MA Ren-tao, ZHA qian-feng, JI Chun-jun, DONG Chuang |
3378 |
Macrosegregation in squeeze-cast Al5Cu0.4Mn alloy based on Taguchi method |
GAN Yao-qiang, ZHANG Da-tong, ZHANG Wei-wen, ZHANG Wen, LI Yuan-yuan |
3386 |
Effect of two-step hot-pressing sintering technique on microstructure and mechanical properties of WC-MgO nanocomposite |
OUYANG Chen-xin, ZHU Shi-gen, MA Jun, QU Hai-xia, LI Qian |
3395 |
Microstructure and mechanical property evolution of SiCp/Al-Fe-V-Si composite during sheet forming process |
HE Yi-qiang, CHEN Zhen-hua |
3402 |
Effect of ball milling modification and surfactant addition on properties of ultrafine 98W-1Ni-1Fe powder |
HAN Yong, FAN Jing-lian, LIU Tao, CHENG Hui-zhao, GAO Yang, TIAN Jia-min |
3409 |
Effect of initial nanocrystal on structural stability of Ti40Zr25Ni8Cu9Be18 amorphous alloy |
ZHOU Xun, KOU Hong-chao, BAI Jie, WANG Jun, LI Jin-shan, ZHOU Lian |
3416 |
Functional Materials |
Effect of ball milling on morphology and structure of multi-walled carbon nanotubes |
MENG Zhen-qiang, LIU Ru-tie, XIONG Yong-jun, ZHAO Fu-an, LI Xi-bin |
3421 |
Effect of load on friction and wear behavior of AuNi9/Au coating tribo-couple |
WANG Xin-ping, XIAO Jin-kun, ZHANG Lei, ZHOU Ke-chao |
3427 |
Sliding friction characteristic of C/C-BN prepared by mold-pressing |
YUAN Xi-fan, GE Yi-cheng, YI Mao-zhong |
3432 |
Preparation and adsorption property of Br-doped nano porous TiO2 |
ZHANG Wen-li, YAN Yun, LÜ, Hong-yan, ZHANG Fu-mei, JIANG Yin-hua |
3439 |
Research progress of spray deposited high Si-Al alloys for electronic packaging |
LIU Wen-shui, WANG Ri-chu, PENG Chao-qun, MO Jing-yi, ZHU Xue-wei, PENG Jian |
3446 |
Effects of process parameters on spinning stability of nickel-based alloy thin-walled tube |
ZHANG Huai-liang, ZOU Bai-wen, XIAO Lei, ZHOU Sheng, DENG Rui |
3456 |
Hot deformation behavior and processing maps of Al2O3/Cu-WC composites |
FENG Jiang, TIAN Bao-hong, SUN Yong-wei, LIU Yong, ZHANG Yi, REN Feng-zhang |
3462 |
Numerical simulation of dendrite growth with different preferred growth orientation angles |
SHI Yu-feng, XU Qing-yan, LIU Bai-cheng |
3468 |
Fabrication of non-magnetic and cube textured Ni-12%V alloy substrate used for coated conductors by melting route |
YUAN Dong-mei, SUO Hong-li, GAO Mang-mang, MA Lin,WANG Jin-hua, LIU Min |
3476 |
Synthesis of LiFe0.95Ni0.02Mn0.03PO4/C and its electrochemical properties |
WU Qiang, WANG Xian-you, SHU Hong-bo, YANG Shun-yi, WANG Ying-ping, YANG Xiu-kang, BAI Yan-song, WEI Qi-liang |
3482 |
Preparation and photoelectrochemical properties of nano-porous tungsten trioxide films electrode |
CHEN Xiang, LI Jie, LI Wen-zhang, CHEN Qi-yuan |
3487 |
Effect of nitrogen treatment of Ti substrate on service performance of IrO2-Ta2O5 coating |
YAN Zhen-wei, MENG Hui-min, JING Ying |
3495 |
Application and development of copper foils for lithium ion secondary batteries |
JIANG Peng, YU Yan-dong |
3504 |
Effect of preparation parameters on properties of electrodeposited Ni-cBN composite coatings |
WANG Cui-feng, CHIOU Shi-yung, LI Hung-yuan, HUANG Chung-chuan |
3511 |
Research progress of tungsten-base materials as plasma facing materials |
ZHU Ling-xu, YAN Qing-zhi, LANG Shao-ting, XU Lei, GE Chang-chun |
3522 |
Boron removal from metallurgical silicon by plasma melting using electromagnetic induction |
CAI Jing, LU Cheng-hao, LI Jin-tang, MA Wen-hui­,, LUO Xue-tao |
3529 |
Mine |
Effect of water glass on flotation separation of smithsonite and quartz |
ZHANG Guo-fan, CUI Meng-meng, ZHU Yang-ge, SHI Qing, LUO Na |
3535 |
Improvement in settlement property of alumina tri-hydrate slurry by neutralization in sodium chromate solution |
LIU Gui-hua, LI Yun-feng, QI Tian-gui, ZHANG Yu-feng, LI Xiao-bin |
3542 |
Electrodeposition of AsSb alloy from hydrochloric acid system |
CAO Hua-zhen, WAN Qiang-bo, SHAN Hai-peng, RUAN Hui-min, ZHENG Guo-qu |
3548 |
Hydrolysis behavior of AlN in aluminum dross |
JIANG Lan, QIU Ming-fang, DING You-dong, SU Nan, YAO Quan |
3555 |
Tuning of Ce3+ doping on emissions of YPO4:Tb3+, Ce3+ microspheres and energy transfer between Ce3+ and Tb3+ |
GAO Yong-yi, ZHAN Shi-ping, ZHONG Hui |
3562 |