| New Forming Technology |
| Optimization of cold forging perform tools using Pseudo Inverse Approach |
Ali HALOUANI, Yu-ming LI, ABBES Boussad, Ying-qiao GUO |
207 |
| Machine and tool development for forming of polymeric tubular micro-components |
Jie ZHAO, Arthur Lan Kuan YIP, Yi QIN, Akhtar RAZALI, Zhi-cong FEI |
214 |
| Prediction of texture evolution under varying deformation states through crystal plasticity finite element method |
LI Hong-wei, YANG He |
222 |
| A new approach to investigate real flow stress in micro-extrusion |
LIN Jun-feng, LI Feng, ZHANG Jin-feng |
232 |
| Critical blank-holder force in axisymmetric deep drawing |
QIN Si-ji, XIONG Bai-qing, LU Hong, ZHANG Ting-ting |
239 |
| FE analysis for radial spread behavior in three-roll cross rolling with small-hole and deep-groove ring |
QIAN Dong-sheng, HUA Lin, DENG Jia-dong |
247 |
| Development of thermal deep drawing system with vacuum environment for difficult-to-deformation materials |
MENG Bao, WAN Min, WU Xiang-dong, ZHOU Ying-ke |
254 |
| Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy |
SHENG Xiang-fei, XIA Qin-xiang, CHENG Xiu-quan, LIN Lie-shu |
261 |
| Drawability of thin magnetron sputtered Al-Zr foils in micro deep drawing |
Gerrit BEHRENS, Julien KOVAC, Bernd KÖ,HLER, Frank VOLLERTSEN, Heinz-Rolf STOCK |
268 |
| Characterization of plastic behaviour of sheet metals by hydraulic bulge test |
Lucian L&#,Z&#,RESCU, Dan-sorin COM&#,A, Ioan NICODIM, Ioan CIOBANU, Dorel BANABIC |
275 |
| Mechanics condition of thin-walled tubular component with rib hydroforming |
CHU Guan-nan, YANG Shuai, WANG Jian-xun |
280 |
| Springback mechanism and compensation of cryogenic Ti alloy tube after numerically controlled bending |
ZHAN Mei, ZHAI Hua-dong, YANG He |
287 |
| Plastic damage of T-shape hydroforming |
TENG Bu-gang, YUAN Shi-jian, CHEN Zeng-tao, JIN Xue-run |
294 |
| Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom |
LANG Li-hui, WANG Yong-ming, XIE Ya-su, YANG Xi-ying, XU Ying-qiang |
302 |
| Welded double sheet hydroforming of complex hollow component |
LIU Wei, CHEN Yi-zhe, LIU Gang, CUI Xiao-lei |
309 |
| Advanced feature detection algorithms for incrementally formed sheet metal parts |
Amar Kumar BEHERA, Bert LAUWERS, Joost R. DUFLOU |
315 |
| Ultrasonic thickness measurement for aluminum alloy irregular surface parts based on spectral analysis |
CONG Sen, GANG Tie |
323 |
| Control strategy of over-bending setting round for pipe-end of large pipes by mould press type method |
ZHAO Jun, ZHAN Pei-pei, MA Rui, ZHAI Rui-xue |
329 |
| Forming of New Materials |
| Experimental measurement and theoretical prediction of forming limit curve for aluminum alloy 2B06 |
LI Xiao-qiang, SONG Nan, GUO Gui-qiang |
335 |
| Comparative analysis between stress- and strain-based forming limit diagrams for aluminum alloy sheet 1060 |
FANG Gang, LIU Qing-jun, LEI Li-ping, ZENG Pan |
343 |
| Plastic deformation on hydroforming of aluminum alloy tube with rectangular sections |
WANG Xiao-song, YUAN Shi-jian, SONG Peng, XIE Wen-cai |
350 |
| Springback law of thin-walled 6061-T4 Al-alloy tube upon bending |
LI Heng, SHI Kai-peng, YANG He, TIAN Yu-li |
357 |
| Formability and microstructure of AA6061 Al alloy tube for hot metal gas forming at elevated temperature |
HE Zhu-bin, FAN Xiao-bo, SHAO Fei, ZHENG Kai-lun, WANG Zhi-biao, YUAN Shi-jian |
364 |
| Effect of pre-deformation on microstructure and mechanical properties of 2219 aluminum alloy sheet by thermomechanical treatment |
AN Li-hui, CAI Yang, LIU Wei, YUAN Shi-jian, ZHU Shi-qiang, MENG Fan-cheng |
370 |
| Effect of internal pressure on corner radius and thickness distribution of shear hydro-bending of 5A02 aluminum alloy tube |
WANG Yong, HAN Cong, YUAN Shi-jian |
376 |
| Shear hydro-bending of 5A02 aluminum alloys rectangular tubes |
HAN Cong, XU Yong-chao, WANG Yong, ZANG Chao, YUAN Shi-jian |
382 |
| Deformation behavior of 5A06 aluminum alloy sheet for rapid gas forming at elevated temperature |
FAN Xiao-bo, HE Zhu-bin, YUAN Shi-jian |
389 |
| Influence of interfacial adhesion strength on formability of AA5052/polyethylene/AA5052 sandwich sheet |
LIU Jian-guang, LIU Wei, WANG Jing-xuan |
395 |
| Effect of equal channel angular pressing and torsion on SiC-particle distribution of SiCp-Al composites |
LI Ping, ZHANG Xiang, XUE Ke-min, LI Xiao |
402 |
| Warm hydroforming of magnesium alloy tube with large expansion ratio within non-uniform temperature field |
LIU Gang, ZHANG Wen-da, HE Zhu-bin, YUANShi-jian, LIN Zhe |
408 |
| Springback characteristics of AZ31 magnesium alloy as-extruded profile in warm tension-rotation bending process |
XIAO Han, ZHANG Shi-hong, ZHOU Rong, LU De-hong |
416 |
| Microstructure and properties of AZ80 alloy semisolid billets fabricated by new strain induced melt activated method |
JIANG Ju-fu, WANG Ying, DU Zhi-ming, LUO Shou-jing |
422 |
| Microstructural evolution and mechanical properties of ZK60 magnesium alloy prepared by multi-axial forging during partial remelting |
TAO Jian-quan, CHENG Yuan-sheng, HUANG Shao-dong, PENG Fei-fei, YANG Wen-xuan, LU Mei-qi, ZHANG Zhi-ming, J |
428 |
| Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process |
WANG Li-ping, JIANG Wen-yong, CHEN Tian, FENG Yi-cheng, ZHOU Hong-yu, ZHAO Si-cong, LIANG Zhen-qiang, ZHU Yan |
435 |
| Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment |
SUN Hong-fei, LI Cheng-jie, XIE Yang, FANG Wen-bin |
445 |
| Microstructure evolution and mechanical properties of AZ80 alloy reheated from as-cast and deformed states |
ZHAO Gao-zhan , YANG Lin , DUAN Xun-xing, REN Xiao-hua, ZHU Li-min, YANG Ting-jun, GUO Xiang-yong, HAO Shao- |
450 |
| Modelization and comparison of Norton-Hoff and Arrhenius constitutive laws to predict hot tensile behavior of Ti-6Al-4V alloy |
ZHANG Chao, LI Xiao-qiang, LI Dong-sheng, JIN Chao-hai, XIAO Jun-jie |
457 |
| Hot deformation behavior of in-situ TiBw/Ti6Al4V composite with novel network reinforcement distribution |
ZHANG Yu-zi, HUANG Lu-jun, LIU Bao-xi, GENG Lin |
465 |
| Superplastic forming Ti-6Al-4V titanium alloy cylinder with near uniform thickness distribution |
JIANG Shao-song, LU Zhen, HE Xiao-dong, WANG Guo-feng, ZHANG Kai-feng |
472 |
Mechanical properties and formability of TA2 extruded tube for
hot metal gas forming at elevated temperature |
HE Zhu-bin, TENG Bu-gang, CHE Chang-yong, WANG Zhi-biao, ZHENG Kai-lun, YUAN Shi-jian |
479 |
| Effect of sintering neck on compressive mechanical properties of porous titanium |
ZOU Chun-ming, Liu Yan, YANG Xin, WANG Hong-wei, WEI Zun-jie |
485 |
| Characterization of TiAl-based alloy with high-content Nb by powder metallurgy |
SUN Hong-fei, LI Xue-wen, FENG Jie, FANG Wen-bin |
491 |
| Smart hot stamping of ultra-high strength steel parts |
Ken-ichiro MORI |
496 |
| Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel |
Jie LIU, Rudolf KAWALLA |
504 |
| Manufacturing of complex high strength components out of high nitrogen steels at industrial level |
Hannes NONEDER, Marion MERKLEIN |
512 |
Dynamic recrystallization rules in needle piercing extrusion for
AISI304 stainless steel pipe |
GUO Liang-gang, DONG Ke-ke, ZHANG Bao-jun, YANG He, ZHENG Wen-da , LIU Xiong-wei |
519 |
| 3D numerical analysis of material flow behavior and flash formation of 45# steel in continuous drive friction welding |
JI Shu-de, LIU Jian-guang, YUE Yu-mei, LÜ, Zan, FU Li |
528 |
| Effect of tool temperature and punch speed on hot stamping of ultra high strength steel |
LIU Wei, LIU Hong-sheng, XING Zhong-wen, LIU Gang, BAO Jun |
534 |
| Hot formation quality of high strength steel BR1500HS for hot stamping without cooling system |
LIU Hong-sheng, XING Zhong-wen, LEI Cheng-xi |
542 |
| Magnetic pulse joining of aluminum alloy-carbon steel tubes |
YU Hai-ping, XU Zhi-dan, JIANG Hong-wei, ZHAO Zhi-xue, LI Chun-feng |
548 |
| Cold-pressing deformation characteristics of steel-aluminum sheets joining |
LI Feng, LIN Jun-feng, SUI Xiao-chong, BIAN Nan, XU Ming-da |
553 |
| Wrinkling behavior of hydro bending of carbon steel/Al-alloy bi-layered tubes |
TENG Bu-gang, HU Lan, LIU Gang, YUAN Shi-jian |
560 |
| Compressive property and energy absorption characteristic of 3D open-cell Ni-Cr-Fe alloy foams under quasi-static conditions |
PANG Qiu, WU Gao-hui, SUN Dong-li, XIUZi-yang, ZHANG Qiang, HUZhi-li |
566 |
| Size effect on indentation depth of oxygen-free high purity copper induced by laser shock processing |
HU Yong-xiang, LI Kang-mei, QI Chen-jie, YAO Zhen-qiang, Ramana V. GRANDHI |
573 |
